CLK will not start!! HELP!
#27
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Rocklin, CA
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
2003 SL55, 2006 CLK500, 1998 Vette
So I found a link as to how to install the sensor but it has a diagram from the WIS ASRA softwrae. It asks to remove the air filter housing, remove the hot film mass air flow sensor, and finally remove the air duct housing.
Could someone that has the software pull information for me as to how to do these three parts? The section numbers appear as follow: AR09.10-P-1150QB, AR07.07-P-1453QB, and AR09.20-P-0080QB
I would really appreciate it.
Thank you
Could someone that has the software pull information for me as to how to do these three parts? The section numbers appear as follow: AR09.10-P-1150QB, AR07.07-P-1453QB, and AR09.20-P-0080QB
I would really appreciate it.
Thank you
#29
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Rocklin, CA
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
2003 SL55, 2006 CLK500, 1998 Vette
Could anyone help me on this please...
I found a link as to how to install the sensor but it has a diagram from the WIS ASRA softwrae. It asks to remove the air filter housing, remove the hot film mass air flow sensor, and finally remove the air duct housing.
#31
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Rocklin, CA
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
2003 SL55, 2006 CLK500, 1998 Vette
Can anyone tell me if and why I need to remove the hot film mass air flow sensor? If so, how do I do that? I would really appreciate some further help as I am looking to tackle this task tonight.
#32
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Rocklin, CA
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
2003 SL55, 2006 CLK500, 1998 Vette
So I tried fixing this issue myself tonight and couldn't fix it. I managed to remove the mass air sensor but just couldn't find or reach the CPS to remove it and install the new one.
In the process I broke the collar that wraps around the maf. Does anyone know if I can buy just the collar or does that come with the maf? What is this part called because I haven't been able to find it online?
If anyone can still help me remove the CPS that would be greatly appreciated.
In the process I broke the collar that wraps around the maf. Does anyone know if I can buy just the collar or does that come with the maf? What is this part called because I haven't been able to find it online?
If anyone can still help me remove the CPS that would be greatly appreciated.
#33
MBWorld Fanatic!
Why removed the MAS? Sound to me you don't know where the CPS located? These link may help you.................
http://www.peachparts.com/Wikka/M112M113CPS
The following users liked this post:
jwb007 (08-11-2019)
#35
Super Member
Join Date: Nov 2007
Posts: 655
Likes: 0
Received 1 Like
on
1 Post
I drive the racism out of BadDebt. ;)
heres my 2 cents as I have done this job for countless people here in vancity.
The most easy and quickest way to replace the CPS sensor is to
remove airbox
purge fuel line (to allow for valve cover removal)
remove right valve cover ( to allow for more hand movement and flexibility)
then remove cps sensor...
The most easy and quickest way to replace the CPS sensor is to
remove airbox
purge fuel line (to allow for valve cover removal)
remove right valve cover ( to allow for more hand movement and flexibility)
then remove cps sensor...