Dyno Mode
Dyno Mode
03-26-2012, 04:35 AM
#3
MBWorld Fanatic!
Join Date: May 2010
Location: Syosset, NY
Posts: 1,253
Likes: 0
Received 2 Likes
on
2 Posts
CLK & GL
On the old cars you just had to...
1. turn key to 3rd position(right before car starts)
2. make sure the middle screen is set to Farenheit
3. turn key to first position(off position), do not take key out
4. turn key to the second position
5. hit reset button 3 times and that secret menu comes up
6. scroll through the menu till you see dynometer, turn it on then start the car
1. turn key to 3rd position(right before car starts)
2. make sure the middle screen is set to Farenheit
3. turn key to first position(off position), do not take key out
4. turn key to the second position
5. hit reset button 3 times and that secret menu comes up
6. scroll through the menu till you see dynometer, turn it on then start the car
03-26-2012, 12:04 PM
#5
Senior Member
Thread Starter
Join Date: Jun 2011
Location: Washington DC
Posts: 305
Likes: 0
Received 1 Like
on
1 Post
2009 CLS63 AMG
On the old cars you just had to...
1. turn key to 3rd position(right before car starts)
2. make sure the middle screen is set to Farenheit
3. turn key to first position(off position), do not take key out
4. turn key to the second position
5. hit reset button 3 times and that secret menu comes up
6. scroll through the menu till you see dynometer, turn it on then start the car
1. turn key to 3rd position(right before car starts)
2. make sure the middle screen is set to Farenheit
3. turn key to first position(off position), do not take key out
4. turn key to the second position
5. hit reset button 3 times and that secret menu comes up
6. scroll through the menu till you see dynometer, turn it on then start the car
03-27-2012, 12:04 AM
#6
MBWorld Fanatic!
Join Date: May 2009
Location: Abu Dhabi
Posts: 1,484
Likes: 0
Received 13 Likes
on
9 Posts
C218 CLS63TT PP Edition1, W213 E63S
i already tried it and the car goes crazy,
but to be honest, it is almost as ( ESP off ).
To access "Dynomode", please follow the following instructions and tips.
- before turning off ignition, navigate to the "mileage screen" (make sure any errors are reset)
- turn off key and close door
- do not touch any pedals or buttons other than descibed next
- put key in ignition
- turn to position1
- press and hold "answer" followed by "ok" in fast succession
- a new menu will appear on screen use left "Up & Down" arrows to navigate to "Dynomode"
- press "Ok" to enable
- turn on ignition
but to be honest, it is almost as ( ESP off ).
To access "Dynomode", please follow the following instructions and tips.
- before turning off ignition, navigate to the "mileage screen" (make sure any errors are reset)
- turn off key and close door
- do not touch any pedals or buttons other than descibed next
- put key in ignition
- turn to position1
- press and hold "answer" followed by "ok" in fast succession
- a new menu will appear on screen use left "Up & Down" arrows to navigate to "Dynomode"
- press "Ok" to enable
- turn on ignition
Trending Topics
09-09-2012, 05:00 PM
#9
MBWorld Fanatic!
09-11-2012, 07:04 AM
#11
Super Member
Join Date: Jul 2009
Location: Toronto
Posts: 520
Likes: 0
Received 2 Likes
on
2 Posts
2014 Lotus Evora S
I think it's something like key in position 1 (door closed), make sure that dashboard screen shows mileage display, then hold call button on the steering wheel followed by the ok button on the steering wheel and hold both for 5 seconds, then you navigate the menu.
Last edited by Mr. Happy; 09-11-2012 at 07:13 AM.
