MAYA wheelz
2 Attachment(s)
ok since i trashed my car and wheels i want new ones.
this is what i am thinking of http://www.hopupracing.com/mayastm.html what size can i run? with what offset? and what size tires? btw i just had the fenders rolled. http://store1.yimg.com/I/hopup1_1854_129464831 if you guys have other suggs please post them. i really like the blk chrome, the deepdish, and the snowflake look. and yes these are expensive. i hope to get them wholesale. if i cant i want other options. the bbs rx II are about the same price but are 3 piece and are not blck chrome. the bbs rx is the non-3 piece. what do you all think? |
I like the BBS RXs a lot, if you had the fender lips rolled, you could probably run 225/40/18s without any difficulties, or maybe even 235/40/18s?
|
Eric,
I'm really liking the BBS RX. Those would look great on your car. Hell, BBS wheels always look great on German cars. I would only recommend 225's all around, 235 is a little pushing it. |
Must I get my fender lips rolled for my 300ce? It has 225/35zr18's in the front and 235/40zr18's in the rear. I wanna get the H&R springs with the 1.5" drop in the front and 1.3" in the rear.
|
Makahveli,
you'll definitely need a good spring pad set up once you lower your car and to roll your fenders. I could put 235/45-17's on my car but I would have to do a lot of modifications to not make it rub. Alon will tell you that for sure. Are your wheels staggered which is why you're going wider in the rear? |
i have 235/40 17 now. they dont rub. however i rolled the fenders during paint so i have more options.
which rx do you like? rx or rx 2 (3 peice with all the screws) |
If i ever get some money i will make my own design custom wheel out of billet and have a big polish lip in the back with a custom offset both rear and front. I'm thinking 18x8.5 in the back and 18x7 in the front. If you need to find the company that does this i can give you their number. They make wheels for most hot rods but they can drill out almost any bolt pattern.
|
Originally Posted by YNVDIZW124
If i ever get some money i will make my own design custom wheel out of billet and have a big polish lip in the back with a custom offset both rear and front. I'm thinking 18x8.5 in the back and 18x7 in the front. If you need to find the company that does this i can give you their number. They make wheels for most hot rods but they can drill out almost any bolt pattern.
|
Eric, go with the BBS RX. The car in my opinion wouldn't flow with the 3piece.
|
2 Attachment(s)
The first one isn't too bad, but personally I like the AMG Monoblocks II. Here are 2 other rims I'd consider:
|
carelsons arent my thing. i have had big centered wheels for a long time. i want a change where you can see my big brakes.
|
Have you thought about Borbets?
|
Originally Posted by NorCal124
Have you thought about Borbets?
i like the wheel that is discontinued the borbet type s |
2 Attachment(s)
How about this?
This are Brabus III style wheels in 20" ! |
Those Brabus wheels are sexy, I actually thought about getting Brabus at one time but never found a good deal on them.
|
Originally Posted by EKL
How about this?
This are Brabus III style wheels in 20" ! |
how about my hammers? :hammer:
|
I have the AMG monoblock double spoke 18"s. I think 8.5 inches wide. Here is an actual picture of the wheels on the car, sometimes the link works and sometimes it don't:
http://www.autotrader.com/fyc/img_po...x421.jpg&isp=y |
3 Attachment(s)
Originally Posted by AMG_Eric
those brabus wheels have the same probs as the ones i have now. they dont show off the brakes.
|
1 Attachment(s)
|
are you going to be selling your AMG monoblocks once you get your new rims??
|
jrmd i like the wheels in the 1st pick on the 124 but i want them in black chrome. no more polished business or chrome. the c-class rims dont look that bad either. post up the brands please and a rough price.
Originally Posted by FiFth_StreetZ
are you going to be selling your AMG monoblocks once you get your new rims??
Originally Posted by Makahveli
I have the AMG monoblock double spoke 18"s. I think 8.5 inches wide. Here is an actual picture of the wheels on the car, sometimes the link works and sometimes it don't:
http://www.autotrader.com/fyc/img_p...2x421.jpg&isp=y |
2 Attachment(s)
That better? And thats factory suspension there
|
Originally Posted by Makahveli
That better? And thats factory suspension there
|
They are? Damn I got conned, oh well thay came with the car with the orginal stock wheels and tires anyway. Well I still feel that the car was worth the price with only 75k miles for just under $7K
|
All times are GMT -4. The time now is 03:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands