Current COMAND SW
 

The ability to display ETA below the map while navigating was added for Model Year 2007. The software needs to be upgraded by your dealer to enable this on previous units. Not certain if there are additional advantages (with or without navigation) to upgrading as I have not had hands on yet it's been a while since I last visited a dealer.

W211 (E) and C219 (CLS):

USA COMAND head unit software update - Disc # W211 589 14 22 00 (SW: 22.100, 46/06) was released 1/18/07

EU update: Disc #W211 589 13 22 00 (SW: 21.090, 30/06) released 1/18/07

Thanks Dan, I've added it to my list of things to check when I pick up my new '08:y

do you need a 2007 navi DVD too to make this work? or is this something exclusively in the COMAND head unit?

To clarify; will this update only work on MY07 and up or will it work on older W211/W219's with COMAND? –if so what if the cut-off MY?

:) I posted this info on a different thread a week or so ago, but your posts are far more informative, plus we have had this upgrade.

These are possibly the other modifications??

blocked Bluetooth from the head unit
- wrote out the SMTP / POP client
- wrote out the internal address book
- enabled better operation with linguatronic
- enabled better phone book lookup by name spelling
- disabled the keypad workaround for "tv in motion"

I have NO knowledge whatsoever as to whether these are correct.

Regards
Your number one fan
John from sunny Torquay

My take, all COMAND heads units with navigation regardless of navigation disc installed. Of course, Estimated Time of Arrival (ETA) function would require navigation (inclusive of navigation disc). MY07 should already have the newest version installed but if delivery was taken early on I would check to see if you have the ETA function mentioned or have your dealer confirm your software version.

Yes I know John and thanks. I thought it would be best to post both the MBUSA and EU updates in one place for easier reference.

The CLS has been near perfect. My only reason to stop at a dealership is to chat, gossip, grab a complimentary Starbucks …you know, fill the void between errands and chores if the dealership happens to be on my route. Maintenance is but once a year however, if I find the time maybe I will stop in and actually have the upgrade applied as to better be able to answer questions about it.

I managed to get a hold of a updateCD EU update: Disc #W211 589 13 22 00 (SW: 21.090, 30/06) released 1/18/07 for my ECE comand
Now the big question ,,Is it going to lock the secret menu option???
Just wondering if anyone did it already.
Thanks

I asked my SA about an update about 3 months ago. He said that it couldn't be done. Don't know if it really couldn't be upgraded, if the software update wasn't yet available, or he just didn't want to do it. It would also be great to get the radio preset scanning feature the '07s have!

Not going to happen, has more to do with the IC software that was revamped for 07 than COMAND.

Yup it will :)

Once the CD has carried out the upgrade you will have the option to have the ETA as the main screen or one of the other options.

http://www.glojo.eclipse.co.uk/forumimages/ETA.jpg

Regards
John from a very dark Torquay

Just now my SA called at told me that they cannot find the upgrade in the MB system. The number you mentioned - according to them - doesn't make sense.

Do you have an MB part number or a TSB number I can reference?

I can'tcomment on your dealers competance or otherwise but the part numbers that have already been posted are taken off the wrapping from the CD. They are Mercedes-Benz numbers.

Sorry I can't be more helpful but I can give you the details of my dealership that ordered the part with those numbers? :)

Regards
John

I'm not familiar with part numbers but could it be that this part isn't a normal spare part but "a service tool" instead? I've seen that mentioned e.g. for the engine "dipstick" for cars that don't have one. The parts guy should do a different search in this case.

I normally refer to this page for the CD/DVD info, I know John already is familiar with this one.

http://www.mercupgrades.com/COMAND-APS+FAQ-faq-10.html

Ask them if service disc W211 589 11 22 00 and W211 589 12 22 00 make sense.

:):) I think we must always remember the European items might be very slightly different but this item is indeed a service disc and is usually only obtained by dealers.


Regards
John

OK, so I called the other dealership we have in town and the parts rep found the part in 5 seconds. He told me that it would be $9.95+ tax. At about the same time the SA from the first dealership called and told me that it is an upgrade done through the StarDiag computer and that could do the upgrade for $40. I told them to go ahead and I would be there in a few (I was on my way to pick up the car anyway). When I got there the SA told me that they didn’t have the upgrade and they would have to get it. I could come back next week and they could do the upgrade. I was also told that the MB system have the upgrade marked as only being applicable to MY ’03.

He asked me if I was sure that it would work on my ’06 and I said that I was fairly sure. So I guess that I should either go get the disk or have the first dealership do the upgrade for $40. What is the upgrade process if you do it by disk? I seem to remember that I read somewhere that it would be a matter of putting in the disk in the COMAND’s CD drive and then the upgrade would happen. Does that make sense? –or should I let the dealership do the work?

I thought the software get updated automagically when you put in a newer nav DVD. When I went from 2005.3 to 2006.2, the comand showed updating....

So what does this software actually update? And shouldn't MB do this for free anyway? As our cars are under factory warranty?

John

Not every NavUpdate disk has a COMAND update. Sometimes there is only a MAP update & no Software update at that time.

Hopefully I will answer most of the questions by just answering this one?

The dealer that has offered to install it for $40 is making a tidy profit. The $9.95 is about right. The disc comes with instructions for the technician to install.

Basically you press three buttons which are listed on the CD cover. The COMAND asks for the service disc to be installed. This update will take 10 - 15 minutes and when completed it automatically ejects the Cd. You are then told to get out the vehicle and lock it. This then activates the software. 10 minutes later, unlock the car, go to Map and press the option Display and hopefully you will get the Option screen.

It does not matter what version of the mapping software we have, this upgrade is a completely seperate issue.

Hopefully that has answered the questions.

Regards
John

Hey John, once again, thanks.

The cost is not an issue, it is a software update intended to “update” your present COMAND and its install or any malfunction requiring correction thereafter is paid for by MBUSA at no cost to you other than the time taken to visit the dealership, hence “Service” disc.

When I mentioned these two service discs I meant to imply why doesn’t “W211 589 14 22 00” make sense because W211 589 11 22 00 applied to the W211 & C219 COMAND and W211 589 12 22 00 applied to ’03 211 Audio50 unit. Anyway, simply W211 589 14 22 00 succeeds W211 589 11 22 00 (W211 589 11 22 00 is specifically referenced within DTB P-B-82.60/382a MAY06).

I'm still unclear as to whether this update is considered a no charge item, if the car is still under warranty.

My SA/lead tech said cost free - considered update under warranty. Although not specific to my VIN the update can and will be installed without worry of malfunction. BTW, service disc was located immediately via part # posted. I suggest checking with “all” your local dealers for their feedback as to cost, availability, and successful application even if not specific to your VIN.