|
Clunk fixed for good
We'll after 7 months several trip to the dealer and about $3000 I have finally fixed the front end "clunk" on my 2006 E350.......I traded it today for Chinese. Thank to all for advice and your knowledge, but I have to go...
|
Chinese food? ...or a car?
|
Car
Nissan |
Nissan is Japanese.
|
Originally Posted by jaxfl
(Post 6180420)
We'll after 7 months several trip to the dealer and about $3000 I have finally fixed the front end "clunk" on my 2006 E350.......I traded it today for Chinese. Thank to all for advice and your knowledge, but I have to go...
Isn't Nissan Japanese :) |
Originally Posted by RONB
(Post 6183298)
What was the clunk? I have the same issue...
Isn't Nissan Japanese :) Yea Yea Chinese Japanese.... it still a rice burner....LOL Anyway never did find the REAL clunk. Spent more than $3000 at the dealership and independent over the last 7 months and replaced ball joints, bearings, tightened all kinds of bolts, nuts, replaced motor mounts, transmission mounts, tires, and still had it. IF you do a search on here and also some other MB sites/forums with just the word "clunk" you will find more than 4000 (I am not kidding) more than 4000 CLUNK posts listed and that goes way back to 2002. Almost all are some kind of front end while turning CLUNKs. I just gave up and changed to a different manufacture. My other 2 MB back in the 80's and 90's were pretty well built but the 2000's seem to have lost it. |
Originally Posted by jaxfl
(Post 6183305)
Yea Yea Chinese Japanese.... it still a rice burner....LOL
Anyway never did find the REAL clunk. Spent more than $3000 at the dealership and independent over the last 7 months and replaced ball joints, bearings, tightened all kinds of bolts, nuts, replaced motor mounts, transmission mounts, tires, and still had it. IF you do a search on here and also some other MB sites/forums with just the word "clunk" you will find more than 4000 (I am not kidding) more than 4000 CLUNK posts listed and that goes way back to 2002. Almost all are some kind of front end while turning CLUNKs. I just gave up and changed to a different manufacture. My other 2 MB back in the 80's and 90's were pretty well built but the 2000's seem to have lost it. Thanks for the quick response! |
You woln't have to worry about anymore clunk or thud noises, rice-burners only make cling and ting sounds.
|
I fixed my SBC brakes and airmatics with new Chrysler 300C 5.7 Black
|
Originally Posted by rediesel
(Post 6184051)
You woln't have to worry about anymore clunk or thud noises, rice-burners only make cling and ting sounds.
|
| All times are GMT -4. The time now is 07:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands