V6 control arms
Thread Starter
Member
Joined: Jul 2012
Posts: 216
Likes: 0
2003 C32
V6 control arms
Hello,
I am about to install a set of coil overs on my sons 2006 e500. I understand we need to swap the rear control arms to the v6/non-air ride version. I was looking to buy used but cannot find both sides on Ebay. Any other ideas? TIA, Mike
I am about to install a set of coil overs on my sons 2006 e500. I understand we need to swap the rear control arms to the v6/non-air ride version. I was looking to buy used but cannot find both sides on Ebay. Any other ideas? TIA, Mike
MBWorld Fanatic!
Joined: Jan 2009
Posts: 9,225
Likes: 1,798
From: V E G A S
1922 Ford Model T / no OBD
How much are they worth for you?
My local junk yard has 2003 model on the lot. I can go over and pull them for you.
Picture or drawing of needed part would help.
My local junk yard has 2003 model on the lot. I can go over and pull them for you.
Picture or drawing of needed part would help.
Thread Starter
Member
Joined: Jul 2012
Posts: 216
Likes: 0
2003 C32
Thanks and sorry for the delay in responding. I have heard the pair go for about $150 used/shipped? I believe I need the version on the left, to allow for the coils, correct? And where are you located?
Thread Starter
Member
Joined: Jul 2012
Posts: 216
Likes: 0
2003 C32
MBWorld Fanatic!
Joined: Jan 2009
Posts: 9,225
Likes: 1,798
From: V E G A S
1922 Ford Model T / no OBD
So between $80 for arm, or $200 for whole suspension you do have choices.
Let me know if you know other parts.
W211 come to the age when they show on pick&pull, so I can get those parts pretty cheap.
Our Bluetec shows driver seat wear, just pulled identical cover from passenger seat on JY for $8.
Bad part without option to move the seat took over 1 hr to get it out.
Let me know if you know other parts.
W211 come to the age when they show on pick&pull, so I can get those parts pretty cheap.
Our Bluetec shows driver seat wear, just pulled identical cover from passenger seat on JY for $8.
Bad part without option to move the seat took over 1 hr to get it out.
