Alpine ILX-207 install. Need command center wiring
#1
Member
Thread Starter
Alpine ILX-207 install. Need command center wiring
I'm trying to install a new headunit in my E500 and the wires are not labeled in the car so I have no idea what wires got to what on the new harness. I checked the wiring diagram from my emanual but I don't understand it. Anyone have a simpler version?
Thanks
There are two plugs the go into the command unit:
Large Plug: 1 yellow/red
2 brown
2 orange
Small Plug: 1 tan
1 clear
1 brown
Alpine unit harness:
Rear Left: Green, Green/Black
Front Left: White, White/Black
Front Right: Grey, Grey/Black
Rear Right: Violet, Violet/Black
Power: Red
Ground: Black
VIN: WDBUH83J96X202363
Thanks
There are two plugs the go into the command unit:
Large Plug: 1 yellow/red
2 brown
2 orange
Small Plug: 1 tan
1 clear
1 brown
Alpine unit harness:
Rear Left: Green, Green/Black
Front Left: White, White/Black
Front Right: Grey, Grey/Black
Rear Right: Violet, Violet/Black
Power: Red
Ground: Black
VIN: WDBUH83J96X202363
Last edited by Onyxthecat; 09-09-2018 at 01:45 PM.
#3
Member
Thread Starter
Just got off the phone with crutchfield, they told me the car has fiber optic cables and the wires would have to run back to the amp in the trunk. Not sure if this is worth it.