New to Mercedes help needed please
06-09-2019, 12:20 AM
#1
Newbie
Thread Starter
Join Date: Jun 2019
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2006 e350 4matic wagon
New to Mercedes help needed please
I have a 2006 E350 4matic wagon w211.
I have a few questions to ask. Just replaced my front washer pump. When I bought the car it wasn't working. The new one works but I don't have a good seat bad on the connection. It sprays fluid but very weekly. I put a hose clamp on the connection to try to tighten it up to no avail.
Another question I have is I recently replaced my cam sensor; do to the code p0016. This is also not fix my problem. When I changed the cam sensor I did a oil change no metal in oil at all. What else could it be?
I have a few questions to ask. Just replaced my front washer pump. When I bought the car it wasn't working. The new one works but I don't have a good seat bad on the connection. It sprays fluid but very weekly. I put a hose clamp on the connection to try to tighten it up to no avail.
Another question I have is I recently replaced my cam sensor; do to the code p0016. This is also not fix my problem. When I changed the cam sensor I did a oil change no metal in oil at all. What else could it be?
Last edited by Robbie Ridinger; 06-09-2019 at 12:22 AM. Reason: Wrong wording
06-09-2019, 02:12 AM
#2
Newbie
Thread Starter
Join Date: Jun 2019
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2006 e350 4matic wagon
I have a 2006 E350 4matic wagon w211.
I have a few questions to ask. Just replaced my front washer pump. When I bought the car it wasn't working. The new one works but I don't have a good seat bad on the connection. It sprays fluid but very weekly. I put a hose clamp on the connection to try to tighten it up to no avail.
Another question I have is I recently replaced my cam sensor; do to the code p0016. This is also not fix my problem. When I changed the cam sensor I did a oil change no metal in oil at all. What else could it be?
I have a few questions to ask. Just replaced my front washer pump. When I bought the car it wasn't working. The new one works but I don't have a good seat bad on the connection. It sprays fluid but very weekly. I put a hose clamp on the connection to try to tighten it up to no avail.
Another question I have is I recently replaced my cam sensor; do to the code p0016. This is also not fix my problem. When I changed the cam sensor I did a oil change no metal in oil at all. What else could it be?
06-09-2019, 07:09 AM
#3
Hi and welcome to MBworld!
Moving your thread to the W211 forum, good luck with your questions!
Bob
Moving your thread to the W211 forum, good luck with your questions!
Bob
