MBWorld.org Forums

MBWorld.org Forums (https://mbworld.org/forums/)
-   E-Class (W212) (https://mbworld.org/forums/e-class-w212-109/)
-   -   Pre-Facelift center console side wood trim vinyl wrap (https://mbworld.org/forums/e-class-w212/664000-pre-facelift-center-console-side-wood-trim-vinyl-wrap.html)

zeemob 04-24-2017 04:16 PM

Pre-Facelift center console side wood trim vinyl wrap
 
I want to vinyl wrap (brushed metal) the center console side wood trims on my 2012 W212 to give it a facelift refreshed look. Does anyone know if those side wood trims can easily be removed/snapped without having to remove the entire console trim?


https://cimg7.ibsrv.net/gimg/www.mbw...3e06a6f165.jpg


https://cimg9.ibsrv.net/gimg/www.mbw...3a721a6e71.jpg

belarus27 04-24-2017 04:19 PM

yes. these have clips.

lift them from the bottom and slightly pull them up( be careful cuz once then snap off , you might scratch your fingers against sharp edges of the inside plastic)
or
use a plastic pry tool , stick it in between the trim and pull it up

AkaSigFreak 04-24-2017 04:58 PM

Start on the end close to the dash. When you get the front clips undone- there is a tab at the back close to the flip-up doors. You need to GENTLY slide the trim forward and up at the same time.
https://cimg4.ibsrv.net/gimg/www.mbw...b05c133321.jpg

https://cimg6.ibsrv.net/gimg/www.mbw...2bbc3f0cd7.jpg


I replaced the "Stainless" Plastic trim pieces with the Real Brushed Metal pieces.

https://cimg1.ibsrv.net/gimg/www.mbw...e15b254b3d.jpg

zeemob 04-24-2017 05:19 PM

Great. Seems pretty easy DIY mod for me I'm going to go ahead and order brushed aluminum vinyl wrap from ebay today. If everything goes well, I will post before after pics by next week.

Thanks guys for the info. I really appreciate that.

AkaSigFreak 04-24-2017 05:36 PM

No problem. Note where the clips are and where the tab inserts into the trim. Also, be careful when prying the trim. It appears to be soft and easily dinged.

zeemob 04-24-2017 05:48 PM


Originally Posted by AkaSigFreak (Post 7126376)
No problem. Note where the clips are and where the tab inserts into the trim. Also, be careful when prying the trim. It appears to be soft and easily dinged.

Where did you get it from? Can I buy them online? Maybe I should just replace them instead of wrapping if it doesn't cost me a fortune.

Or if 2012 and 2014 side trims are compatible/interchangeable, I can buy your unwanted plastic ones if you sell them to me? What do you say?

belarus27 04-24-2017 06:38 PM

id say get it wrapped ,as it literally takes20-30 min.
have a heat gun/hair dryer ready , and a rubber squeegee.

AkaSigFreak 04-24-2017 07:18 PM


Originally Posted by zeemob (Post 7126391)
Where did you get it from? Can I buy them online? Maybe I should just replace them instead of wrapping if it doesn't cost me a fortune.

Or if 2012 and 2014 side trims are compatible/interchangeable, I can buy your unwanted plastic ones if you sell them to me? What do you say?

You need a Left and Right. Total was $53 and they are Real Brushed Aluminum - not the silver plastic OEM pieces.

http://www.genuinemercedesparts.com/...LXY2LWZsZXg%3D


All times are GMT -4. The time now is 02:31 AM.


© 2024 MH Sub I, LLC dba Internet Brands