No power on the wheels / Bad CV Axle ?
Thread Starter
Newbie
Joined: Apr 2024
Posts: 3
Likes: 0
2015 E400 COUPE
No power on the wheels / Bad CV Axle ?
Hello everyone,
Im a new proud owner of 2015 E400 4matic. I had a shot front left CV Axle so a friend of mine/Mechanic, changed it for me, he took out all the intermediate shaft with the CV axle since both parts were firmly coupled, changed the CV axle with the new one and then putback the whole assembly. Job was done, i took the car for a ride and it went smooth.
Two days later, i was driving entering the highway and i lost power on the wheels : the engine revs and the car wont accelerate. Towed the car back home, and now im trying to figure out the source of the problem.
When testing it in my garage, the car only moves at "idle speed", whether in Drive or Reverse, and it makes strange noise when i put it back to Park
First thought was the tranny but the thing is, i never had any sort of trouble with it, gear changing is relatively fast, smooth and noiseless, plus i can even change back and fourth between first and second gear on manual without any trouble. Could it be a bad CV axle ? or the intermediate shaft is not fully locked inside the differential? i heard when u have one side of the CV shaft free spining, the other side wont turn, but then again the cars moves at like 5km/h, does this come from the rear wheels?
Im no mechnaic, all i have is basic simple knowledge, and my friend is on trip for a few weeks so all opinions are welcomed, thanks.
Im a new proud owner of 2015 E400 4matic. I had a shot front left CV Axle so a friend of mine/Mechanic, changed it for me, he took out all the intermediate shaft with the CV axle since both parts were firmly coupled, changed the CV axle with the new one and then putback the whole assembly. Job was done, i took the car for a ride and it went smooth.
Two days later, i was driving entering the highway and i lost power on the wheels : the engine revs and the car wont accelerate. Towed the car back home, and now im trying to figure out the source of the problem.
When testing it in my garage, the car only moves at "idle speed", whether in Drive or Reverse, and it makes strange noise when i put it back to Park
First thought was the tranny but the thing is, i never had any sort of trouble with it, gear changing is relatively fast, smooth and noiseless, plus i can even change back and fourth between first and second gear on manual without any trouble. Could it be a bad CV axle ? or the intermediate shaft is not fully locked inside the differential? i heard when u have one side of the CV shaft free spining, the other side wont turn, but then again the cars moves at like 5km/h, does this come from the rear wheels?
Im no mechnaic, all i have is basic simple knowledge, and my friend is on trip for a few weeks so all opinions are welcomed, thanks.
MBWorld Fanatic!
Joined: Aug 2023
Posts: 3,744
Likes: 1,137
From: MA Coast
W204 2010 C300 4matic Sport M272
Jack up the front end and spin one wheel, see how the other wheel spins, should be in the opposite direct.
Im wondering if the circlip on the intermediate shaft was installed, or if it popped out somehow?
Can scan the car with a Mercedes specific obd reader to check for any codes.
Im wondering if the circlip on the intermediate shaft was installed, or if it popped out somehow?
Can scan the car with a Mercedes specific obd reader to check for any codes.
Thread Starter
Newbie
Joined: Apr 2024
Posts: 3
Likes: 0
2015 E400 COUPE
He told me that he installed it. Im gonna jack the car up tomorrow and check it out.
I just bought the AP200 OBD2 reader since my basic scanner wouldnt show me any error, ill keep you updated when its delivered
Thank you
I just bought the AP200 OBD2 reader since my basic scanner wouldnt show me any error, ill keep you updated when its delivered
Thank you
