nycebo

That looks awesome. Very nice job. Super good looking. I can see that I really need to investigate tinting my windows, especially in the rear.

stephos

That's turned out real nice!

suby01

Just looks sooooo good clean and shiny.

BF3PDZ

Nice Brabus front lip, How did you install it, and does it require any drilling of the front bumper?

suby01

Thanks. Drilling is suggested, as it comes with places for them every 4-6 inches but that seems a bit too excessive. There are several ways you can do this, drill only, 3M double sided tape only, or use epoxy type glue, or a combination of any of the three. I used only 2 screws kind of in the middle points and then 3M double sided tape. And the lip simply slides onto your bottom bumper like a C shape kind of, this is where I used 3M double sided tape if I ever decide to remove the lip then I can remove the screws, no one will never see those that they are there since they are under the bumper, and there shouldnt be much scratches on the bumper from the lip touching the lip due to the cushion of the tape. In my previous car I used epoxy glue and it worked great also but that was more of a permanent type install. It was already rain and wind tested and holds without budging.

thewb

G3710

lrylegend

Just picked up my 2019 E450 Estate.

stephos

I really like the style of this one

Clear2Close

nas2344

Clear2Close

suby01

Nothing else at this time. The Brabus modifications are a little too extreme with other accessories. But I did love the front lip. I initially went with a CF option from another brand but I decided that I want to keep the theme gloss black instead.

jojot

rbrylaw

I love my Lunar Blue E450 too! Glad you're loving yours as well!

suby01

Bumping this thread up. Cmon everyone snap some pictures of your W213's!

From clean to dirty. Stock to modified. Snow outside to palm trees. At work or grocery store or fancy instagram photo op spot. Lets keep this going.

Meeru

mdot949

iTrader: (1)

Latest shot of my E43 lowered on forgestar f14’s

nycebo

Wow, Meeru, that is SICK! Gorgeous car.

threeMBs

Very nice! Please, provide wheels/tires specs including offsets.TIA.

mdot949

iTrader: (1)

Front - 20x9.5 et 25 with 5mm spacer to clear the suspension strut - tires - 245/35/20
Rear - 20x10.5 et 45 tires - 275/30/20

threeMBs

Amazing, 20x9.5 et20 upfront! I tried 20x8.5 et18 and poke was about 12mm. With your setup, my poke would be a full inch. Two differences - you're lowered, I'm not; E43 vs. E450 (however, to my knowledge, unlike E63, all fenders are identical between E53/43/450/400/300). The only reasonable conclusion is: lowering allows for significantly lower offsets, which otherwise would be impossible.

mdot949

iTrader: (1)

Yes I am assuming that the negative camber caused when I lower the car compensates for the poke. When I raise the car up (I have fully adjustable air ride, via obd lowering module) I notice that the wheels look more flush with the fenders creating a bit more poke.

thewb

MME400

(Deleted)