When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Remove top cover by prying the front edge upwards using a plastic wedge or similar, never use metal tooling!
The leading edge is fastened with 4 clips.
Cut felt piece to 25x10mm, fit here:
Grease here with Krytox:
Fit felt mat carefully over each clip and reinstall cover.
Thing is, I have heard a slight rattle from the top dash from time to time in my own car and it is made Feb 2017
Will remove the cover once I get time and take a look on the "solution" from factory.
Seems like this generation of Mercedes are very prone to squeaks and rattles, which is not acceptable. I have never had such issues with my Mercedes until I got my W205. I hope MB would have sorted out these issues by the time my car gets built next year.
Seems like this generation of Mercedes are very prone to squeaks and rattles, which is not acceptable. I have never had such issues with my Mercedes until I got my W205. I hope MB would have sorted out these issues by the time my car gets built next year.
I got a brand new loaner couple weeks ago, I was the first one to drive it with a build of I believe march and it had the dash rattle. I couldn't believe it. that they did not resolve it since last year. Very unacceptable for this brand of a car.
Seems like this generation of Mercedes are very prone to squeaks and rattles, which is not acceptable. I have never had such issues with my Mercedes until I got my W205. I hope MB would have sorted out these issues by the time my car gets built next year.
in the 90s it was pretty standard during the mercedes Chrysler debacle
Seems like this generation of Mercedes are very prone to squeaks and rattles, which is not acceptable. I have never had such issues with my Mercedes until I got my W205. I hope MB would have sorted out these issues by the time my car gets built next year.
My 2014 CLA had to go in 3 times to fix dash rattles, especially the center mounted monitor. And prior to getting rid of my 2016 C450 rattles started to develop just behind the instrument panel. Mercedes dashboards now consist of so many different components to create that signature "flowing look" -- there are bound to be some annoying contact squeaks. I loved the old solid looking dashes of the W140s.
Mercedes dashboards now consist of so many different components to create that signature "flowing look" -- there are bound to be some annoying contact squeaks.
These problems should have been picked up during the design and testing phase and fixed before the car is released for production. Surely after hundreds of thousands of miles of testing these rattles and squeaks would have become very noticeable.
These problems should have been picked up during the design and testing phase and fixed before the car is released for production. Surely after hundreds of thousands of miles of testing these rattles and squeaks would have become very noticeable.
Mine had it. Along with driver door rattles and creaks and now, with 22,000 miles on the clock, the entire centre console and especially the centre glove box/cubby box is creaking (and one lid doesn't shut well now too). And the driver's seat frame and plastic rear panel were replaced to stop seat creaking. Not impressed at all, the w212 facelift I had was solid as granite. W213 looks great, but is far more fragile.
Last edited by Proeliator2001; 08-27-2017 at 04:48 PM.
Reason: Add info
Remove top cover by prying the front edge upwards using a plastic wedge or similar, never use metal tooling!
The leading edge is fastened with 4 clips.
Cut felt piece to 25x10mm, fit here:
Grease here with Krytox:
Fit felt mat carefully over each clip and reinstall cover.
what part of the car is this? is that the whole top front panel? Doesn't look familiar in my car..
08-09-2017, 02:52 AM
)
