S213 subwoofer enclosure build
#1
MBWorld Fanatic!
Thread Starter
S213 subwoofer enclosure build
So I tried a traditional MDF-enclosure under the storage compartment floor but that didnt work out very well, the lid rattled and dampened the sound.
I sold that enclosure and will instead try to make a sealed fibreglass enclosure.
The plan is a 8, 10" or maybe a 12" woofer, stealthy installed integrated in the small space to the left in the trunk space.
Hopefully I will find a mat similar to the OE one.
Panel removed
Taping the panel to be able to apply the resin and fibreglass, the box will sit flush with the rear edge I will then place the speaker ring making it protrude about two inches.
I sold that enclosure and will instead try to make a sealed fibreglass enclosure.
The plan is a 8, 10" or maybe a 12" woofer, stealthy installed integrated in the small space to the left in the trunk space.
Hopefully I will find a mat similar to the OE one.
Panel removed
Taping the panel to be able to apply the resin and fibreglass, the box will sit flush with the rear edge I will then place the speaker ring making it protrude about two inches.
The following users liked this post:
Dazefxtheone (10-24-2022)