ASP 180mm E55 Pulley Brand New
 

We picked this up for a customer and have been holding onto it for about 3 weeks now. We were going to keep it as stock, but ASP has upped their production and it takes 3 days to get a pulley now instead of 2 weeks.

Retail is 895.00 plus shipping, we're letting it go at 850.00 shipped.

Plus if you would like to get a tune to go along with it we can do a package deal for 1500.00.

How does the tune work?

Would I have to ship my ECU?

IDEM and hows my power going to end?
RWHP?
Torque?

The tuning will be an LET tune. We had a car with Kleemann Headers, 180mm pulley, and tune put down 485 RWHP and 595 RWTQ. The tune alone added 60 RWHP and 72 RWTQ.

You can either ship the ECU to us or we can rent you our equipment and you can do it at your home. We'll walk you through it of course.

nice numbers.
what kind of dyno and weather conditions?

This was on a Dynojet and the weather was "Springish." It was raining outside but warm.

How much is for the ECU tune?
and how much is for the rent of the tune equipment?

How dificult or easy is to tune it?
I can use the STAR diagnosis for example... Not at 100%, but I can understand most of its uses.
Is it like a STAR?

The tune is basically done through us, all you do is plug into the OBD port and read the stock file and then flash the new one on. We mostly Remote control the PC for users if they have any issues.

The rental is 50.00 plus 800.00 deposit.

If you can understand STAR this is a piece of cake.

So what is the diference between sending my ECU and rent your equipment?
Because the total price with pulley is very diferent, $900 compared to $1500. That is plus the $800 of deposit that you will retunr once your equipment is back to you in the same condition you sent.

Is there any custom mapping that I can do it when I rent your equipment?

Im sorry for all the questions, but I just want to get the most power possible with pulley and ecu tune; besides Im very nterested in buying this pulley that you are offering.

Sorry, let me break it down. The pulley normally retails for 950.00 and the tune for 800.00. We are offering the pulley for 895.00 and the tune for an additional 605.00. If you choose to rent the equipment then the total cost to you would be 1550.00+800.00 core.

We can do anything you want when you have our equipment, however the 50.00 rental fee is for one week. If you wanted to set up a dyno near you, we could tune and send files back and forth until you were happy. With this service there is an hourly rate of 125.00 plus whatever the dyno time is.

Sending in your ECU will give you the same file is if we send you our equipment. It is the same equipment we use to tune at meets or on the dyno. We don't really advertise the rental service as we only have 3 pieces of equipment and they would probably be snatched up pretty quick.