When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Has anyone else noticed how the new 2019 G bull bar partially blocks the top part of the 3 point Mercedes star? It almost makes it look a little like an aftermarket piece of kit. I think Mercedes “had” to do this because if they raised the bb up just a bit to clear the top of the star, the top horizontal tube would be smack dab in front of the forward looking camera. I wonder if Mercedes was way down the road on their design schedule when they learned the brush bar would be a mandatory DOT requirement in USA, thus they were boxed in. Too late to redo everything, such as rethinking the camera location, etc., thus the partially blocked star.
Don’t get me wrong, the new G is a gorgeous beast (or I wouldn’t have ordered one in the first place), but that bb just looks a tad bit Rube Goldburgish, what with its partially covered star.
Has anyone else noticed how the new 2019 G bull bar partially blocks the top part of the 3 point Mercedes star? It almost makes it look a little like an aftermarket piece of kit. I think Mercedes “had” to do this because if they raised the bb up just a bit to clear the top of the star, the top horizontal tube would be smack dab in front of the forward looking camera. I wonder if Mercedes was way down the road on their design schedule when they learned the brush bar would be a mandatory DOT requirement in USA, thus they were boxed in. Too late to redo everything, such as rethinking the camera location, etc., thus the partially blocked star.
Don’t get me wrong, the new G is a gorgeous beast (or I wouldn’t have ordered one in the first place), but that bb just looks a tad bit Rube Goldburgish, what with its partially covered star.
I really doubt the bull bar is a US DOT requirement, but more likely an MBUSA marketing requirement. Since the MB Star has gotten so big, it’s probably pretty hard not to cover up some portion. Anyway, I, along with a few other forum members, hope to remove our bull bars after delivery.
You could certainly be right about there being no US DOT requirement for a bb on G550/G63, but I thought I had read this somewhere on this site. I could certainly be wrong, though.
The new bb appears to go down through the top of the bumper to secure it to the frame. So, if you were to remove it, wouldn't this leave 2 big holes in the top of the bumper? I also wonder if the vehicle's firmware for vehicle sensing, etc. would get impacted, or even the camera angle, and so on. Could be a lot of collateral issues with bb removal. Maybe someone has a contact at Mercedes to ask about this. I would think a lot of US owners will want to do this, so at some point perhaps someone can coax MBUSA to address this, perhaps something akin to a watered down version of a service bulletin.
You could certainly be right about there being no US DOT requirement for a bb on G550/G63, but I thought I had read this somewhere on this site. I could certainly be wrong, though.
The new bb appears to go down through the top of the bumper to secure it to the frame. So, if you were to remove it, wouldn't this leave 2 big holes in the top of the bumper? I also wonder if the vehicle's firmware for vehicle sensing, etc. would get impacted, or even the camera angle, and so on. Could be a lot of collateral issues with bb removal. Maybe someone has a contact at Mercedes to ask about this. I would think a lot of US owners will want to do this, so at some point perhaps someone can coax MBUSA to address this, perhaps something akin to a watered down version of a service bulletin.
Filling the holes left by the bull bar should be as easy as finding the MB part number for the covers that comes standard on the European G’s that don’t have the bull bar installed in the first place.
Filling the holes left by the bull bar should be as easy as finding the MB part number for the covers that comes standard on the European G’s that don’t have the bull bar installed in the first place.
I don't see any holes on the Euro bumpers. I imagine it is a different part number. Give it time and the aftermarket will have some good options...
Is the front dot thing above the symbol a camera? Mine doesn't seem to have a front camera it only shows the rear and I don't see cameras on the side mirrors either?
2013 S550 SOLD / 2016 S63 SOLD / 2017 GLS450 / 2017 G550 4x4 / 2019 G63 E1 SOLD / 2019 AMG S63 COUPE
Originally Posted by M1M2M3
Is the front dot thing above the symbol a camera? Mine doesn't seem to have a front camera it only shows the rear and I don't see cameras on the side mirrors either?
Yes, that's a camera and the mirrors got cameras as well.
Yes, that's a camera and the mirrors got cameras as well.
Strange that you don't have them.
I have that dot thing above the star but Its never shown me a front view and I don't see side view cameras where I see them in my GL. The screen only shows rearview camera?
2013 S550 SOLD / 2016 S63 SOLD / 2017 GLS450 / 2017 G550 4x4 / 2019 G63 E1 SOLD / 2019 AMG S63 COUPE
Originally Posted by M1M2M3
I have that dot thing above the star but Its never shown me a front view and I don't see side view cameras where I see them in my GL. The screen only shows rearview camera?
I believe there are adjustments on the right side of the camera screen right after you put the car in reverse or when you push the 360 view ..
I believe there are adjustments on the right side of the camera screen right after you put the car in reverse or when you push the 360 view ..
please see attached. The option for the front cameras do not show up at all and the screen only show reverse. I’m going to head to the dealer tomorrow.
2013 S550 SOLD / 2016 S63 SOLD / 2017 GLS450 / 2017 G550 4x4 / 2019 G63 E1 SOLD / 2019 AMG S63 COUPE
Originally Posted by M1M2M3
please see attached. The option for the front cameras do not show up at all and the screen only show reverse. I’m going to head to the dealer tomorrow.
Did you try to put it in D, it will not show the front unless its on D.
The G550's DO NOT come with front cameras, it's not even an option they offer due to bull bar. Only the G63's will have the front and side cameras so you can have real time satellite 360 view from top. This is why in the G550 you will see grid lines around the car when you are in reverse as in the photos posted. I inquired abou the 360 parking camera when we ordered the G550 and could not spec the 360 camera in the US, I was able to order it for my G63 due in this spring.
Has anyone removed the bull bar off their 2019 G550? Does it come off the same as the G63?
Yes, I had mine removed to powder coat it. Remove the plastic caps located just below the vertical component of the bull bar and it will reveal 2 vertically oriented bolts per side. Remove the bolts and the bull bar lifts right up. There are 2 additional bolts/nuts holding the vertical and horizontal components together.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
