2009 GL550 - Control Arm Bushings are tearing
#1
Junior Member
Thread Starter
Join Date: Aug 2016
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
2010 S550; 2009 GL550
2009 GL550 - Control Arm Bushings are tearing
What does this mean? I have looked at parts diagrams and I see nothing that would tear except for the CV joint. Comments appreciated. Also, are these parts that are bought as an assembled kit or can you purchase individual components?
Thanks all.
Thanks all.
#2
Junior Member
Thread Starter
Join Date: Aug 2016
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
2010 S550; 2009 GL550
So I received a quote from an independent service provider, they say to replace bushing in upper Control Arm Front R/L, and to replace Lower R/L control arms plus alignment would be $2300. They show 10 hrs of labor required. Does this sound about right? I am sure dealer would be much more.
#3
What are they charging for parts? The bushings are cheap. If Genuine MB parts, FCP Euro shows the lower control arms at $660 a piece. Thats $1300 right there if he quoted you for those parts. Aftermarket parts would be considerably less. 10 hours does seem like a lot for that considering you're just unbolting pieces sitting right in front of you (meaning its not a part buried deep under the hood requiring lots of other parts removed just to get to it.)
Last edited by mefferso; 05-12-2017 at 11:20 PM.