Any GL63 owners live near Renntech (7825 SW Ellipse Way, Stuart, FL 34997)?
 

Hi - looking to the forums for help. I'm looking to have a part made and Renntech needs to look at the engine bay to get measurements.

They have M157's all day long, but the GL63/ML63/GLE63 has an active curve system which is different from all the other E63/CLS63/etc.

If anyone is interested in helping out that has a GL63 (X166), I'm happy to paypal you $20 to help pay for your gas. I know it's not a lot, but hoping someone can help! I'm guessing it would take under an hour to get the measurements.

Renntech 7825 SW Ellipse Way, Stuart, FL 34997

PM me if you are interested. Thanks in advance.

I'm in Florida but I'm probably 10 hours away from Stuart. Would cost me way more than $20 to drive there and back. Maybe there is another GL63 member located in the Palm Beach area that could chime in.

Probably at least $350-$400 in gas if not more and more importantly, your time is way more valuable than that. Thanks for commenting, hopefully someone closer is on the forum!

Bump to see if anyone is near Renntech to get measured for a part. Thanks! Has to be a GL63.