MBUSA Configurator Issues & Build Rules
 

I thought it might be helpful if we had a separate thread to discuss issues and newly discovered rules building a GLE.

To get things started I found new rules not clarified in the DOG when selecting Driver Assistance Package PLUS.

To see this rule:

• Start a new build then go directly to the Performance & Safety tab
• Select Driver Assistance Package PLUS and the following rule will be displayed:

https://cimg1.ibsrv.net/gimg/www.mbw...84641d3ecc.png

Note that the above rule says AMG Line Interior must be added. However, the DOG says the opposite, Not with AMG Line Interior:

https://cimg4.ibsrv.net/gimg/www.mbw...923bab3280.png

Both rules cannot be correct so I'm guessing the configurator is wrong since I ordered Driver Assistance Package PLUS but didn't order AMG Line Interior.

Selecting E-ACTIVE BODY CONTROL on the Performance & Safety tab does nothing.

Give it time cause I'm guessing the site still has bugs that need to be addressed.

Noticed that the Drivers Assistance package is not available for the GLE350 on the configurator (but I have seen listings for GLE350s with it equipped.)

I noticed a few things have been fixed on the configurator.

Now working:

• Can select E-ACTIVE BODY CONTROL Package
• Can select Driver Assistance Package PLUS

New issue:

• Cannot select ENERGIZING Package Plus and Driver Assistance Package PLUS together (I ordered both so I know this is incorrect and the DOG allows both to be selected)

Remaining issue:

• Cannot select Wood/Leather Steering Wheel and Heated Steering Wheel together (I ordered both so I know this is incorrect)

The Driver Assistance Package PLUS still not available when building out a 350 on the configurator. (It does appear for the 450.)

I noticed the Driver Assistance Package Plus can now be added to the 350 on the site.