Spark Plug DIY
What's up everybody?
I looked for any DIY or tutorials for changing out our spark plugs so I made a write up and yes it is fairly straight forward aka don't over think it... My GLK is a 2010 350 4Matic with a little over 128K miles and on the OEM plugs, so I figured she could use the switch. So here we go... 1) Open hood 2) Remove engine covers 3) Grab any variation of a T-30 Torx bit (mine was easiest with a screwdriver style and a bit for a small ratchet and 1/4 socket 4) Remove the two Torx screws per coil plug 5) Remove coil 6) Remove abd replace plug with new plug (I used pre-gapped OEM Bosch plugs from BMA) 7) Install is reverse order Sorry for no pics, I use a potato phone and its not that smart... Happy wrenching! -Travis |
|
All times are GMT -4. The time now is 03:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands