GLK rear sway bar bushing problem

Reply Subscribe

Thread Tools

Search this Thread

Rate Thread

Jan 6, 2020 | 01:53 AM

maxhr

Thread Starter

Newbie

Joined: Jan 2020

Posts: 3

Likes: 1

GLK

GLK rear sway bar bushing problem

Hi guys

I'm planning to change my 2013 GLK rear sway bar bushing , so I bought a couple of bushings.

But the shape of rear sway bar bushing bracket is somewhat different from other Mercedes model's

Will it be hard to remove old bushing and put in new one?

Please answer to my question and good luck.

Jan 6, 2020 | 10:17 AM

andreigbs

MBWorld Fanatic!

Joined: Jul 2012

Posts: 1,369

Likes: 319

From: WI

GLK 250

I guess the question I'd have is: why? How have you determined that you need new RSB bushings? Or is this a preventive measure?

Jan 6, 2020 | 02:55 PM

bmwstephen

Member

Joined: Jun 2018

Posts: 90

Likes: 9

GLK350

Quote:

Originally Posted by andreigbs

I guess the question I'd have is: why? How have you determined that you need new RSB bushings? Or is this a preventive measure?

agree with this. The merc bushings on the GLK is one of the more robust components I have seen. They usually don't go out this quick. Heck, even my shocks and struts are good at 70k.

contrary to my BMWs these typically need to be replaced every 60k

Jan 6, 2020 | 04:36 PM

andreigbs

MBWorld Fanatic!

Joined: Jul 2012

Posts: 1,369

Likes: 319

From: WI

GLK 250

Mine is still on the original shocks and springs, FWIW. I’ve only replaced front brakes, and that was once at 74k miles.

In general, I’ve found the Merc suspension quite robust.

Jan 6, 2020 | 06:42 PM

maxhr

Thread Starter

Newbie

Joined: Jan 2020

Posts: 3

Likes: 1

GLK

Quote:

Originally Posted by andreigbs

I guess the question I'd have is: why? How have you determined that you need new RSB bushings? Or is this a preventive measure?

I just wanted to change them for preventive measure but after reading all the replies I'd better not do that,

Thanks for all the replies.

Jan 6, 2020 | 07:02 PM

bmwstephen

Member

Joined: Jun 2018

Posts: 90

Likes: 9

GLK350

Quote:

Originally Posted by maxhr

I just wanted to change them for preventive measure but after reading all the replies I'd better not do that,

Thanks for all the replies.

I would only do it if there sizeable play, dry rot, or cracking and that is usually in conjunction with other components like control arm bushings, tie rods, and strut mounts..

Jan 6, 2020 | 08:16 PM

maxhr

Thread Starter

Newbie

Joined: Jan 2020

Posts: 3

Likes: 1

GLK

Quote:

Originally Posted by bmwstephen

I would only do it if there sizeable play, dry rot, or cracking and that is usually in conjunction with other components like control arm bushings, tie rods, and strut mounts..

Thanks for your reasonable reply.