M-Class (W163) Produced 1998-2005: ML 230, ML 320, ML 350, ML 400 CDI, ML 430, ML 500, ML 270 CDI

Lights Don't Blink When Doors Are Locked

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 01-24-2010, 07:02 PM
  #1  
Junior Member
Thread Starter
 
wildzeus's Avatar
 
Join Date: Feb 2008
Location: wausau, wi
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
2001 ml 320
Lights Don't Blink When Doors Are Locked

Hello everyone. I have a 2001 ML320 and when I lock my doors my exterior lights don't blink 3 times like they are supposed to. All doors are shut and do lock when hitting the lock button on remote. When I go to unlock them, the lights do blink once. What could the problem be?

Last edited by wildzeus; 01-25-2010 at 10:15 PM.
Old 01-27-2010, 09:09 PM
  #2  
Junior Member
 
mbtechny's Avatar
 
Join Date: Jan 2010
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
97 c280, 01 ml320, 04 r32
sounds like you have a bad aam (all activith module). probably should have dealer repair because module has to be coded.
Old 01-28-2010, 01:37 PM
  #3  
Newbie
 
lyleswk's Avatar
 
Join Date: Jan 2010
Location: Fort Worth, Texas
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
1999
Are you absolutely sure all the locks are locking? I have a problem with a sticky driver's door lock and the alarm won't even try to set.
Old 01-28-2010, 09:18 PM
  #4  
Junior Member
Thread Starter
 
wildzeus's Avatar
 
Join Date: Feb 2008
Location: wausau, wi
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
2001 ml 320
yes, all doors are locking.
Old 01-29-2010, 12:55 AM
  #5  
Super Member
 
mihir_d's Avatar
 
Join Date: Apr 2003
Location: Bay area - California
Posts: 685
Received 31 Likes on 25 Posts
2000 ML320 2006 SLK 350
Is your engine hood properly shut?

Originally Posted by wildzeus
yes, all doors are locking.
If the engine hood isn't properly shut the lights won't blink.
After checking that, check your relay 7 fuses.
If these are okay, then it could be the AAM
Old 01-30-2010, 08:08 AM
  #6  
Junior Member
 
mbtechny's Avatar
 
Join Date: Jan 2010
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
97 c280, 01 ml320, 04 r32
if your door lock is stuck the alarm will not work. but if your locks all work then the module is the prpblem. i have replaced a lot of them for this issue.
Old 01-30-2010, 11:02 PM
  #7  
Junior Member
Thread Starter
 
wildzeus's Avatar
 
Join Date: Feb 2008
Location: wausau, wi
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
2001 ml 320
when you say module - u are talking about the aam?
Old 01-31-2010, 10:05 AM
  #8  
Junior Member
 
mbtechny's Avatar
 
Join Date: Jan 2010
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
97 c280, 01 ml320, 04 r32
yes the aam. its located in the fuse box under the hood.
Old 02-02-2010, 04:14 PM
  #9  
Junior Member
 
aznxtacy's Avatar
 
Join Date: Jun 2004
Location: San Jose, CA
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
ML500
I have the same problem, is your trip computer working? If not, then that's your problem. You'll need to get a new trip computer because it's related to that circuit.
Old 02-03-2010, 10:29 PM
  #10  
Junior Member
Thread Starter
 
wildzeus's Avatar
 
Join Date: Feb 2008
Location: wausau, wi
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
2001 ml 320
i do not have a trip computer - i do have the tow away (security) feature - that doesn't work. is that on the same circuit? the button is located where the trip computer would be.....
Old 02-04-2010, 02:46 AM
  #11  
Junior Member
 
aznxtacy's Avatar
 
Join Date: Jun 2004
Location: San Jose, CA
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
ML500
not familiar with that feature.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Lights Don't Blink When Doors Are Locked



All times are GMT -4. The time now is 01:09 AM.