Gallery for all the ML's HERE! PLEASE POST UR PICTURES*
#82
MBWorld Fanatic!
Join Date: Aug 2002
Location: North Cuba/West Bimini
Posts: 2,256
Likes: 0
Received 0 Likes
on
0 Posts
Cars and boats!
Originally posted by Viktorious
... or he cut his springs...
... or he cut his springs...
This is current setup before i go full RENNTech coilovers in the future:
H&R Springs (for lowering)
KYB Shocks
RENNTech Rear Swaybar (for a lot less bodyroll)
#83
MBWorld Fanatic!
RENNTech? Wow....that should be pretty pricey. I read that they relocate the mounting points which means cutting the old mounts and welding new ones on. If the springs are cut, the ride must be pretty bad. I have new Bilstein HDs on H&R springs and the ride is a bit stiff.
#85
MBWorld Fanatic!
Join Date: Aug 2002
Location: North Cuba/West Bimini
Posts: 2,256
Likes: 0
Received 0 Likes
on
0 Posts
Cars and boats!
Originally posted by Sincity
RENNTech? Wow....that should be pretty pricey. I read that they relocate the mounting points which means cutting the old mounts and welding new ones on. If the springs are cut, the ride must be pretty bad. I have new Bilstein HDs on H&R springs and the ride is a bit stiff.
RENNTech? Wow....that should be pretty pricey. I read that they relocate the mounting points which means cutting the old mounts and welding new ones on. If the springs are cut, the ride must be pretty bad. I have new Bilstein HDs on H&R springs and the ride is a bit stiff.
#87
MBWorld Fanatic!
Join Date: Aug 2002
Location: North Cuba/West Bimini
Posts: 2,256
Likes: 0
Received 0 Likes
on
0 Posts
Cars and boats!
this is what im going with in the near future...... RENNTech/Eibach Coilovers...and convert the front torsion bar system to coilovers also......
...so far theres only 1 ML55 that has done this!!!
...so far theres only 1 ML55 that has done this!!!
#88
Member
Join Date: Jul 2002
Location: North Carolina, USA
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
1998 ML-320
Originally posted by BenzoAMGpower
this is what im going with in the near future...... RENNTech/Eibach Coilovers...and convert the front torsion bar system to coilovers also......
this is what im going with in the near future...... RENNTech/Eibach Coilovers...and convert the front torsion bar system to coilovers also......
Also, RennTech no longer uses Koni coilovers?
Thanks!
#89
MBWorld Fanatic!
Join Date: Aug 2002
Location: North Cuba/West Bimini
Posts: 2,256
Likes: 0
Received 0 Likes
on
0 Posts
Cars and boats!
i was trying to sell it but it seems I cant get what i want for it so I might as well keep my ML!!! I love my ML anyways.....given me no problems, always ran strong and good, big + in the big pimpin sector, and pretty quick for an SUV.
Also, RENNTech uses Koni adjustable shocks and Eibach Coilovers... but now they dont use the Koni shocks no more... they switched to some other company thats in Germany thats better then Koni!!!
Also, RENNTech uses Koni adjustable shocks and Eibach Coilovers... but now they dont use the Koni shocks no more... they switched to some other company thats in Germany thats better then Koni!!!
#90
MBWorld Fanatic!
Join Date: Aug 2002
Location: NYC/NJ.
Posts: 3,381
Likes: 0
Received 0 Likes
on
0 Posts
W209 - W163
Originally posted by BenzoAMGpower
In not a ricer..............
This is current setup before i go full RENNTech coilovers in the future:
H&R Springs (for lowering)
KYB Shocks
RENNTech Rear Swaybar (for a lot less bodyroll)
In not a ricer..............
This is current setup before i go full RENNTech coilovers in the future:
H&R Springs (for lowering)
KYB Shocks
RENNTech Rear Swaybar (for a lot less bodyroll)
#91
MBWorld Fanatic!
Join Date: Aug 2002
Location: North Cuba/West Bimini
Posts: 2,256
Likes: 0
Received 0 Likes
on
0 Posts
Cars and boats!
Originally posted by Viktorious
Chill bro, I didn't call you a ricer, i was just saying some guys in my area have cut springs on their truck to lower it more.. so sorry for my ignorance.
Chill bro, I didn't call you a ricer, i was just saying some guys in my area have cut springs on their truck to lower it more.. so sorry for my ignorance.
its cool bro!!!! I was just implying that it would be ricey to cut springs. I lowered my truck the right way!!!
#92
MBWorld Fanatic!
Benzo,
I don't remember the part #s. Bilstein only has 1 part # for the front and 1 for the rears now. In the past, they made 2 versions of the rear shock. Now only the one.
I am waiting for H&R to release their sway bar kit. It is still TBA.
I don't remember the part #s. Bilstein only has 1 part # for the front and 1 for the rears now. In the past, they made 2 versions of the rear shock. Now only the one.
I am waiting for H&R to release their sway bar kit. It is still TBA.
#95
Newbie
Join Date: Jan 2004
Location: Gävle, Sweden
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes-Benz ML270CDI -01
My ML
Here is how my ML looks right now.
I'm going to remove the extra headlights, add a roof spoiler at the back, get a newer front spoiler (from a later model or AMG or brabus), get 19", paint the grill in the same color as the car, buy a pair of bi-xenon headlights and add some kind of dvd-entertaintment system.
Below is my little C-class 180 -98.
Lots of snow here in sweden =)
I'm going to remove the extra headlights, add a roof spoiler at the back, get a newer front spoiler (from a later model or AMG or brabus), get 19", paint the grill in the same color as the car, buy a pair of bi-xenon headlights and add some kind of dvd-entertaintment system.
Below is my little C-class 180 -98.
Lots of snow here in sweden =)
#96
MBWorld Fanatic!
Join Date: Aug 2002
Location: North Cuba/West Bimini
Posts: 2,256
Likes: 0
Received 0 Likes
on
0 Posts
Cars and boats!
Originally posted by Sincity
What is the thickness and cost of the Renntech bar?
What is the thickness and cost of the Renntech bar?
...email Bob Brady.. if your stumped or have any further questions you can ask me!!!