Hitch wiring install questions
I am going to get the wiring harness and hitch socket, but will I need a new SAM? Can I just plug the harness into my current factory SAM and have the dealer re-configure it?
Or will I need to buy a completely new one? I would love to save the extra $350 by using my current one.
Thanks everyone.
SAM:
http://www.ecstuning.com/Mercedes_Be...SAM/ES2188537/
Hitch:
http://www.ecstuning.com/Mercedes_Be...tch/ES2222409/
Harness:
http://www.ecstuning.com/Mercedes_Be...tch/ES1697533/







Early seems to be pre-2008 and later is post 2008 with 2008 questionable.
This is of course secondhand rumors.



If a new SAM and/or re-coding is required for a first time tow hitch installation one should be careful where you get your equipment from in that you may end up paying more in the end going with an aftermarket system. Thanks for posting that about the SAM even if it isn't any more than just a rumour.


