|
(New project) Tail Lights Update
I have been looking for a helpful way start this little project and couldn’t find any even there is something who did posted something about his tails upgrade long time ago but he just posted a pics how it looks like.. so it’s nice to be detailed for people who want help but l risk it and started by myself and l know a little about electrical issues so l did it and took me 2/5 days because l don’t have a garage and l try to work on it on the morning avoiding mosquitos in the evening so the GLE tails fits exactly the same no modifications no cuts and my advice for folks who doesn’t know how anything about electronic issues so l recommend you to buy the GLE tails plug connectors too so l didn’t buy and l had to cut the ML tail plug that goes to the tail and the ML has 4 wires only and the new GLE tails has 6 pins (wires) so you have to keep switching the wires around until you find the correct light up and you will end up with 1 wire left from the ML connector l mean the black which’s the negative so you have to blush it to the breaks and you will need more than 4 resistors so l did put 4 resistors on each wire and l will order 2 more for the reverse led lights and you have to take the positive revers light from back door because the old ml reverse light located there and the new GLE reverse is on the sides so you will need to get the wire from there get it around the corner trim to the tail sides it’s a little hard but you can do it just be patient and l still have the lights messages on my dash so l still need more resistors to put on each wire even on the parking light which both old ml and GLE is led but things has changed now so its needed and l will post some pics to show different between both tail lights and l will post a video to show how to do it on my Facebook as soon as l finish with the rest of the resistors and turn the light messages on the dash off so it will be clean work and everything is good and everyone can do it too .
https://cimg7.ibsrv.net/gimg/www.mbw...2819bef71.jpeg https://cimg9.ibsrv.net/gimg/www.mbw...b304c4a16.jpeg https://cimg5.ibsrv.net/gimg/www.mbw...2502b45c1.jpeg https://cimg6.ibsrv.net/gimg/www.mbw...8a5452bc0.jpeg |
Originally Posted by Sam Waltz
(Post 7741556)
I have been looking for a helpful way start this little project and couldn’t find any even there is something who did posted something about his tails upgrade long time ago but he just posted a pics how it looks like.. so it’s nice to be detailed for people who want help but l risk it and started by myself and l know a little about electrical issues so l did it and took me 2/5 days because l don’t have a garage and l try to work on it on the morning avoiding mosquitos in the evening so the GLE tails fits exactly the same no modifications no cuts and my advice for folks who doesn’t know how anything about electronic issues so l recommend you to buy the GLE tails plug connectors too so l didn’t buy and l had to cut the ML tail plug that goes to the tail and the ML has 4 wires only and the new GLE tails has 6 pins (wires) so you have to keep switching the wires around until you find the correct light up and you will end up with 1 wire left from the ML connector l mean the black which’s the negative so you have to blush it to the breaks and you will need more than 4 resistors so l did put 4 resistors on each wire and l will order 2 more for the reverse led lights and you have to take the positive revers light from back door because the old ml reverse light located there and the new GLE reverse is on the sides so you will need to get the wire from there get it around the corner trim to the tail sides it’s a little hard but you can do it just be patient and l still have the lights messages on my dash so l still need more resistors to put on each wire even on the parking light which both old ml and GLE is led but things has changed now so its needed and l will post some pics to show different between both tail lights and l will post a video to show how to do it on my Facebook as soon as l finish with the rest of the resistors and turn the light messages on the dash off so it will be clean work and everything is good and everyone can do it too .
https://cimg7.ibsrv.net/gimg/www.mbw...2819bef71.jpeg https://cimg9.ibsrv.net/gimg/www.mbw...b304c4a16.jpeg https://cimg5.ibsrv.net/gimg/www.mbw...2502b45c1.jpeg https://cimg6.ibsrv.net/gimg/www.mbw...8a5452bc0.jpeg |
Yes the reverse works as it supposed to
|
Gle tail lights, Hi Sam
Originally Posted by Sam Waltz
(Post 7741556)
I have been looking for a helpful way start this little project and couldn’t find any even there is something who did posted something about his tails upgrade long time ago but he just posted a pics how it looks like.. so it’s nice to be detailed for people who want help but l risk it and started by myself and l know a little about electrical issues so l did it and took me 2/5 days because l don’t have a garage and l try to work on it on the morning avoiding mosquitos in the evening so the GLE tails fits exactly the same no modifications no cuts and my advice for folks who doesn’t know how anything about electronic issues so l recommend you to buy the GLE tails plug connectors too so l didn’t buy and l had to cut the ML tail plug that goes to the tail and the ML has 4 wires only and the new GLE tails has 6 pins (wires) so you have to keep switching the wires around until you find the correct light up and you will end up with 1 wire left from the ML connector l mean the black which’s the negative so you have to blush it to the breaks and you will need more than 4 resistors so l did put 4 resistors on each wire and l will order 2 more for the reverse led lights and you have to take the positive revers light from back door because the old ml reverse light located there and the new GLE reverse is on the sides so you will need to get the wire from there get it around the corner trim to the tail sides it’s a little hard but you can do it just be patient and l still have the lights messages on my dash so l still need more resistors to put on each wire even on the parking light which both old ml and GLE is led but things has changed now so its needed and l will post some pics to show different between both tail lights and l will post a video to show how to do it on my Facebook as soon as l finish with the rest of the resistors and turn the light messages on the dash off so it will be clean work and everything is good and everyone can do it too .
https://cimg7.ibsrv.net/gimg/www.mbw...2819bef71.jpeg https://cimg9.ibsrv.net/gimg/www.mbw...b304c4a16.jpeg https://cimg5.ibsrv.net/gimg/www.mbw...2502b45c1.jpeg https://cimg6.ibsrv.net/gimg/www.mbw...8a5452bc0.jpeg Thanks very much and again you did a great job there. My respect. george |
Originally Posted by Sam Waltz
(Post 7741556)
I have been looking for a helpful way start this little project and couldn’t find any even there is something who did posted something about his tails upgrade long time ago but he just posted a pics how it looks like.. so it’s nice to be detailed for people who want help but l risk it and started by myself and l know a little about electrical issues so l did it and took me 2/5 days because l don’t have a garage and l try to work on it on the morning avoiding mosquitos in the evening so the GLE tails fits exactly the same no modifications no cuts and my advice for folks who doesn’t know how anything about electronic issues so l recommend you to buy the GLE tails plug connectors too so l didn’t buy and l had to cut the ML tail plug that goes to the tail and the ML has 4 wires only and the new GLE tails has 6 pins (wires) so you have to keep switching the wires around until you find the correct light up and you will end up with 1 wire left from the ML connector l mean the black which’s the negative so you have to blush it to the breaks and you will need more than 4 resistors so l did put 4 resistors on each wire and l will order 2 more for the reverse led lights and you have to take the positive revers light from back door because the old ml reverse light located there and the new GLE reverse is on the sides so you will need to get the wire from there get it around the corner trim to the tail sides it’s a little hard but you can do it just be patient and l still have the lights messages on my dash so l still need more resistors to put on each wire even on the parking light which both old ml and GLE is led but things has changed now so its needed and l will post some pics to show different between both tail lights and l will post a video to show how to do it on my Facebook as soon as l finish with the rest of the resistors and turn the light messages on the dash off so it will be clean work and everything is good and everyone can do it too .
https://cimg7.ibsrv.net/gimg/www.mbw...2819bef71.jpeg https://cimg9.ibsrv.net/gimg/www.mbw...b304c4a16.jpeg https://cimg5.ibsrv.net/gimg/www.mbw...2502b45c1.jpeg https://cimg6.ibsrv.net/gimg/www.mbw...8a5452bc0.jpeg |
Hi George
hi friend! My fb is Sam Waltz you can contact me anytime thanks
regards . |
Hi friend
Originally Posted by we47b1me
(Post 7757527)
Next step -- getting the VW badging off of the back of your truck :)
|
Originally Posted by Sam Waltz
(Post 7763044)
lol l did not get the VW badging!
|
You have a vw badge on your car.
I hate any dealer or excess badging sooo... get that **** outta here! |
So true
Originally Posted by drwolf
(Post 7763350)
he's referring to that thing that says "voltswagon" next to the left brake light
regards . Sam.w |
I agree
Originally Posted by kombifan
(Post 7763522)
You have a vw badge on your car.
I hate any dealer or excess badging sooo... get that **** outta here! |
| All times are GMT -4. The time now is 05:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands