Description:

Custom aftermarket wheels for any Mercedes GL or GLS. Will fit GL350, GL450, GL63, GLS, etc..

Very aggressive offset front and rear. 22x10.5" et+19mm 4" lip 22x10.5" et-6mm 5" lip. Ball/radius seat (like factory/oem) for bolts. Hubcentric to GL and other Mercedes. Will fit the ML, but will stick out far unless you're fine with that.

If you have a Mercedes GL or GLS with the oem setup of 21x10 with 46mm offset, you can take a ruler to your wheel and the front will stick out 33mm farther (or 1.29 inches). The rear will stick out 58mm farther or 2.28 inches. E.g. it's like putting a 33 mm spacer in the front and 58 mm spacer in the rear. If you have AMG brakes, the spacer will bring you out 20mm more, so 53mm front and 58mm rear.

TPMS compatible. This does not come with any TPMS, you can re-use the ones in your current wheels or buy another set.

Custom made for the GL. Centers are Renntech in Chrome, Inner Barrel is a forged aftermarket in matte black for easy cleaning, outer barrel is aftermarket hand polished aluminum.

These were put together by an aftermarket wheel manufacturer and not by Renntech. To be clear, the centers are authentic Renntech pieces, but everything else is aftermarket.

Less than 100 miles on the wheels, changed to Brabus and HRE wheels. No bends, no cracks, no curb rash.

You must have an automotive shop or wheel shop that knows how to put on tires onto a 3 piece wheel - or else they might break the seal and cause a slow air leak. If you are unsure, please ask your local shop(s) if they have experience putting tires on 3 piece wheels.

For GL63 or GLS63, requires H&R spacer to clear front AMG caliper, which will be included at no cost. No spacer for rear required.

High quality wheel bolts are also included (20 total) at no cost.

No tires included (285/40/22 - OEM tire size is recommend).

Free local pick-up in Central Illinois.

Shipping is $200 to 48 states (i.e. excluding Hawaii and Alaska).