bonjour
pouvez-vous m'aider a trouver et identifier, les fils du CANBUS des commandes au volant .
pour pouvoir les brancher sur mon SEICANE . Il ne fonctionne pas car les connecteurs ne sont pas les meme que sur ma mercedes 350 cls W219
Merci
​​​​​​​Jean

I have a 2009 e320 bluetec 722.902 transmission. When doing the ATF fill, the tech used 93*F/34*C instead of 113*F/45*C that will likely result in an overfill. Is this overfill just a slight overfill and nothing to bother with or does it need to be corrected? I understand that the earlier instructions was to do the final fill at 40*C to 45*C. dave2001auto

MBtech,

I have an 07 ML350 with 50.5k miles showing signs of transmission problems linked in this forum to the throttle body issue. Sticks in 1st gear after a stop. Sticks in a high gear after a stop, ect. I have an appointment with the dealer on Monday. What info do I need to be armed with for the appointment. Also, if the problem is indeed the throttle body, whats the availability of the part these days and how long will my car be down? Any info would be appreciated. thanks.

G'day MBtech,
In regards to a post you made about a solder joint for the common 722.9 speed sensor issue, can you please give me more info as to where this solder joint is ? is it on the speed sensor or the centre control unit on the conductor board? I have two vehicles in my shop now, I have tried to order parts from Mercedes-Benz but they won't sell us the part in Australia and they say I must tow both vehicles to them for repair, I really want to be able to repair this if possable, I have one of my mechanics that is good with a soldering iron, Just wanted to check with you if you could give me a idea of where the bad joint is before he starts pulling one apart?
Thanks mate

G'day MBtech,
In regards to a post you made about a solder joint for the common 722.9 speed sensor issue, can you please give me more info as to where this solder joint is ? is it on the speed sensor or the centre control unit on the conductor board? I have two vehicles in my shop now, I have tried to order parts from Mercedes-Benz but they won't sell us the part in Australia and they say I must tow both vehicles to them for repair, I really want to be able to repair this if possable, I have one of my mechanics that is good with a soldering iron, Just wanted to check with you if you could give me a idea of where the bad joint is before he starts pulling one apart?
Thanks mate

That's pretty damn cool!! I have an 08 smr510 now...nothin beats a supermoto on the street for causing trouble.

Husqvarna FTW !
I had a 610 TE Supermoto, when they were still Swedish (dude that was 15 years ago, **** I'm getting old) and had a very long swing arm, man I missed that bike, so fun, so stable, it was out accelerating anything on the road, including GSX-R1000, that is until it reach it 150 km/h top speed...

respect dude, and nice avatar

Just make one out of your old thermostat.

Where might I get a Thermostat Tester?