Hello There!

I saw the amazing work ou have done on the retrofit of the driver assistance/distronic for the w212.
I got really interested in doing the same!! I mean, my E400 2015 is such an enjoyable car and already a good car indeed! but man.... these mods you installed would make her complete and even better!!!!!

Mine have only the mono camera that is used to control the headlights.
I have Xentry here installed and working, i could route the cables and do the coding procedures with no problem... IF I KNEW what to do exactly haha i have some clues, but any advice would be great from someone skilled that already did this job!

So if you could help me with hints a little more specific than you posted on the retrofit thread, i wold be glad in following. If you have any documentation you could sell about how to do these, after all, that was hard work you did there! hhaha
Anyway, if you ave something, i would appreciate a miilion years!!!

Best Regards!!

Hi sunil
I'm retrofiting w212 2012 e350 for distronic+.I replace the esp module but i have (can comunication with yaw sensor) fault in esp module.
I think the esp module was wrong tech number.
Do you have any idea sir.
ESP module tech. number is {2124313512}. and also i think this esp module dosen't support dis+.
Thanks a lot sir.

Hi Sunil!

I would greatly appreciate if you could check my comment in your w212 webasto retrofit thread and respond when you get a moment

Thank a lot in advance!

Hello Sunilp,
I have decided to retrofit a w209 cluster in my 2001 w203 and I want mileage and fuel to be working. I understand that I have to replace the fuel sender to mapps and maybe my rear sam. For the mileage to be working like factory is it a good idea to change my old eis (a2035450108) with a new eis which is compatible for both w203 and w209 (a2095453108)? I know that i will have to modify the wiring harness because my old eis has another plug.
Thank you very much in advance!

Hi Sunil,

Great work on the c class. Amazing spec!
I'm about to embark on the Distronic retrofit and am getting lost by all the different part numbers.
The vehicle that I want to fit it to is a late 07 C-Coupe (w203).

Are you able to direct me in the way of any parts catalogues, etc?
Any assistance appreciated.

Thanks,

Jon

Hello Sunil
I want to change my w203 cluster to facelift from w209. I need some info about mapps sensor. Can you help me out?

Hi Sunil,
I was reading one of your posts on how you got ur sideview mirrors to fold, can you please tell me how you went about doing that and the cost. I have a 2009 SL63 and would like to add that mod. Thanks in advance for your help.

Rick

Hi Sunil,
I was reading one of your posts on how you got ur sideview mirrors to fold, can you please tell me how you went about doing that and the cost. I have a 2009 SL63 and would like to add that mod. Thanks in advance for your help.

Rick

Hi Sunil,

I found one of your old posts regarding retrofitting electric trunk closure on the CLK. YOu said you had some information/WIS regarding this. Would you be able to share some light on this? I can't find anything on the net. The in question is a CLK 320 W209 from 04 (facelift). It can be opened using the keyfox/button on the drivers seat, but closure is a manual process.

Many thanks in advance

Hi, I was reading a old thread about installing power seats you had posted in. I have just swapped my 02' c320 seats for an 05' c55 seats. Both sets are 12 way power with memory. I got all the neccesary parts like seat control modules, door control seat modules, door switches and harnesses. All the parts are out of the c55. I plugged them in after swapping everything but still them will not move. Do I need them to be proggramed? If so what do I tell the dealership. I really need some help on this. Im stuck in a uncomfortable driving position.

I did a little investigating and have found all of the seat fuses have blown and blow everytime I replace them instantly....?....?