solekeeper

Hey guys, I just made a thread about this in the other section, but no luck.
So I did my front pads today on my 07c230 and the brake wear indicator is still on.
I replaced the sensor, so what to do MB tech? Thanks!

TMAllison

On most chassis, there is one sensor on the rear set of pads too; did you check wear on the rears before replacing the fronts or make an assumption?

solekeeper

Well we made an assumption. Figuring the fronts do most stopping etc..
But we were right, the fronts were shot.
I guess I should have checked the rear as well..
Anyway to override the dash cpu??