Mark this thread as Unsold
Ball Joint Removal & Replacement Tools
10-03-2017, 10:37 PM
#1
Junior Member
Thread Starter
Ball Joint Removal & Replacement Tools
BETOOLL 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer
$30
$15
$15
Take them all for $50.
I will cover USPS First Class shipping.
$30
Perfect for ball joint service/repair
1 "C" frame press. 1 "C" frame screw. 3 Receiving tubes sizes: 2-3/4" x 3" . 2-1/4" x 2-1/2" . 1-3/4" x 2"
Excellent for removal and installation of press-fit parts such as ball joints, Universal joints and truck brake anchor pins. It will also remove rusted and corroded parts.
GearWrench 3916D Universal Ball Joint Separator - BRAND NEW IN PACKAGE1 "C" frame press. 1 "C" frame screw. 3 Receiving tubes sizes: 2-3/4" x 3" . 2-1/4" x 2-1/2" . 1-3/4" x 2"
Excellent for removal and installation of press-fit parts such as ball joints, Universal joints and truck brake anchor pins. It will also remove rusted and corroded parts.
$15
For Separating the Ball Joint From the Spindle Support Arm on Domestic and Import Vehicles
Adjustable for Different Size Ball Joints
1-1/8" & 2-1/8" (30 & 56mm) Maximum Opening Capacity
8milelake 5pc Fork Type Ball Joint Separator - If you don't need to save the rubber boots, these make it quick & easy to separate.Adjustable for Different Size Ball Joints
1-1/8" & 2-1/8" (30 & 56mm) Maximum Opening Capacity
$15
Tie Rod/ Pitman Arm Tool Kit Tie Rod Spreader with 11/16 inch Wedge Opening
Ball Joint Separator with 15/16 inch Jaw Opening Pitman Arm Wedge with 1.1/8 inch Opening
8 inch Handle for use with a regular hammer Handle with 0.401 inch Shank for use with an aim impact hammer
Both handles fit all three forks Piloted handles act as shock absorbers to protect thread handles
Ball Joint Separator with 15/16 inch Jaw Opening Pitman Arm Wedge with 1.1/8 inch Opening
8 inch Handle for use with a regular hammer Handle with 0.401 inch Shank for use with an aim impact hammer
Both handles fit all three forks Piloted handles act as shock absorbers to protect thread handles
Take them all for $50.
I will cover USPS First Class shipping.
