Brake pressure switch
#1
Newbie
Thread Starter
Join Date: Jan 2019
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
2008 R320 CDI
Brake pressure switch
Hello, Fellow R drivers. Can someone with electrical know-how tell me how to test if this is bad or not?
My scanner tells me my problem is this switch. So I took it off to test it before I go buy another, but can’t seem to find anything on how to test this particular switch. Been looking ( likely in the wrong places) for almost a week.
Putting my meter Ted across the 3 leads I get the following:
across 3-2: 187 kohms
across 2-1: 183 kohms
across 1-3: 6.4 kohms
no continuity between any of the 3.
Thank you to the real techs out there. I’m an old-school mechanic (read NOT technician) with a meter.
schoolbuilder.
My scanner tells me my problem is this switch. So I took it off to test it before I go buy another, but can’t seem to find anything on how to test this particular switch. Been looking ( likely in the wrong places) for almost a week.
Putting my meter Ted across the 3 leads I get the following:
across 3-2: 187 kohms
across 2-1: 183 kohms
across 1-3: 6.4 kohms
no continuity between any of the 3.
Thank you to the real techs out there. I’m an old-school mechanic (read NOT technician) with a meter.
schoolbuilder.