S500 Man

Does Anyone know what adapters it takes to make the oem bosch Bi-xenon headlights work with a Already Xenon Equipped 2002 S500? I am Putting them in, just wanted to need if i need more than one adapter to make the plugs fit. and what to do after headlight is in?

Gondon

http://cgi.ebay.com/ebaymotors/2-ori...spagenameZWDVW

ask the seller of this item he might know.

S500 Man

tried that he said he does not know.

Gondon

why dont you take it to a dealer
ask him how, or have him take a look at it ?

S500 Man

Dealers dont do those kind of swaps....

Gondon

wat about a local car shop?

here in BK

we have one for benz, i seen like SLRS and S65 there always.

they go there for repairs instead of the stealership rofl


here ask this guy he was selling Bi-Xenons b4

http://youtube.com/user/cgreen365

S500 Man

please does anybody have installation instructions on putting on 03+ bosch bi-xenons on a 2000-2002 xenon equipped s500?

S500 Man

a little bit. i thought it was simpler than that.

zam2000

You will need an adapter to install the OEM Bosch xenon version (2003 - later) into the 2000-2002 car. The plug are different. I saw some place sell these adapter for $10-15/each.

The plugs for the auto-level are the same, but the one for the headlight is a bit different.

Since your car already have xenon, you do not need to reprogram the car to recognize xenon, so that's the good news.

Once you have an adapter, it shouldl all work out, the internal of the Bosch version already wire to handle the bi-xenon feature. Notice that the Bosch bi-xenon projector run three wires (negative, hi-positive to trigger open, low-positive to maintain open), so don't try to wire them manually, you'll fry the bi-xenon solenoid in no time . The instruction from Ray work with most bi-xenon projector, except the Bosch E46 projector (used in this headlight)

Loosen up the front bumper a bit will make it much easier to install the light. If you need instruction, I'll put the WIS and post instruction here.

raymond g-

i acknowledge the superior Gung-fu of the Master tnx for jumping in, Huy!

S500 Man

So is this the only adapter i need and thats all??

MB PART NUMBER: A 220 545 46 28

Do you know what the easiest quickest way to remove the headlight is?
.

pkaysm

Go to your mechanic shop ask about rewiring stuff.
You got to do it right.
I'll update you later.

S500 Man

most mechanics have never done this kind of stuff, can you let me know what he did? do you have to cut cables and stuff?

esntrk1

MB AutoWerks in San Diego has the wiring harness. I forget the price but it's not too bad.

S500 Man

(858) 274-2886
Mercedes-Ultimate AutoworksMercedes-Ultimate Autoworks

is this the place your talking about?

or is it

AutoWerks Direct
9285 Chesapeake Drive
San Diego, CA 92123
(858) 569-2447

esntrk1

The second one. That's where I ordered my from.

pkaysm

Yes Yes Yes ~
I'm so glad I did it!! actualy my mechanic did it..
Anyway, It took less than an hour to rewire and setting.

S500 Man

can you post specific instructions on what he actually did and what he rewired and if there was any special wire cutting?

S500 Man

im trying to set up a signature pic it aint working.

S500 Man

are those bosch oem headlights you installed???

pkaysm

Insruction from performancebenz.

S500 Man

looks easy enough, one negative wire, one positive, one ground.

abhatti55

I am planning on doing this install over the weekend if my lights show up. Had a question on how the Bi-Xenon lights operate. When you turn high beams on the projector just raises, or does a halogen high beam bulb light up as well? Also, when you hit the blinker does the xenon flash or is there an another bulb that lights for this?

Big "H"

Pkaysm

Nice

Big "H"

icwater

looks sweet wish i had the spare cash at the moment