GMW

Worked together with our main mechanic and managed to wire up the 2003 lights up to my Dad's 2000 S500. Pics of the car to follow!

ajayz

alright! good job! Can you tell us step by step the process of doing this? and of course, don't forget the pics

GMW

Firstly my disclaimer: I am not responsible for anything that may happen to your lights, car, property, life, etc. if you attempt to do what we did over here. You do these modifications at your own risk!

Now Below is a picture of the old Xenon light which is self-explanatory.

GMW

Now as you can see in the pic below, the new headlight has 3 sockets. In order to make the new lights work another earth wire has to be connected from the brown earth wire which is already connected to the large connector, from a point before it first enters that connector. You should then still have the existing main connector plus a wire coming off the brown wire which now has to be connected to the first left pin in the socket as shown in the pic below. Then your lights will be operational. We haven't yet fixed the range adjuster (self-leveling) but will do so when we have time. I'll post pics of the car later today.

GMW

We also put on the new rear lights as well though those are straight forward as everyone knows.

GMW

It's alive!!!