Report back on my Airmatic malfunction light issue
04-11-2016, 06:16 PM
#1
Junior Member
Thread Starter
Report back on my Airmatic malfunction light issue
Weeks ago I started a thread about my Airmatic malfunction warning light issue, my thread title got mis titled by automatic spell correction and I didn't noticed.
I want to thank you guys who gave me your advise on the issue.
Now I got it fixed at the dealer by replacing a faulty valve block.
The original thread is here FYR, if anyone is interested:
https://mbworld.org/forums/s-class-w...low-light.html
Regards.
I want to thank you guys who gave me your advise on the issue.
Now I got it fixed at the dealer by replacing a faulty valve block.
The original thread is here FYR, if anyone is interested:
https://mbworld.org/forums/s-class-w...low-light.html
Regards.
Last edited by StephenW2016; 04-12-2016 at 01:43 PM.
The following users liked this post:
StephenW2016 (04-12-2016)
04-12-2016, 01:41 PM
#3
Junior Member
Thread Starter
This is my reply on the original "mis-titled" thread:
Thank you guys for your advises, I had it checked by the dealer and it was the faulty valve block sends signal to the Airmatic control unit and makes it look like the control unit was at fault. Dealer had to put in a new control unit to test/read it, then switch back to my original unit after they replaced the valve block.
At lest that's what the service adviser told me.
$520.65 parts and $328.88 labor.
Thank you guys for your advises, I had it checked by the dealer and it was the faulty valve block sends signal to the Airmatic control unit and makes it look like the control unit was at fault. Dealer had to put in a new control unit to test/read it, then switch back to my original unit after they replaced the valve block.
At lest that's what the service adviser told me.
$520.65 parts and $328.88 labor.
