oBD-2 Lowering module
I want to share my experience of lowering my S63 coupe.
I have long wanted to lower my suspension but i was afraid of all existing methods, and once I found this offer on Amazon: The device is super small and compact and plugs into the OBDII port under the dash. Seller has outstanding customer service. Responded to all my questions really fast. Crazy fas shipping and item as described. I have S63 coupe and was able to custom lower my suspension in a minute. This is so easy and online instructions are straight forward. Can go back to stock suspension values without problems. Car looks so much better and I love lowered handling too. Pictures below show car lowered but I am still adjusting to find better look with not compromised handling at the same time. what do you think about it ? |
|
Car looks good at that height. I also have an OBD Lowering module. And it does works great. I like that it has 3 different pre sets settings you can chose from. |
Originally Posted by phatisfy
(Post 7596762)
Car looks good at that height. I also have an OBD Lowering module. And it does works great. I like that it has 3 different pre sets settings you can chose from. |
Op, when you do custom and the values are - 55mm do you change it to - 45 to raise the car?
|
Originally Posted by SkforzaGroup
(Post 7629615)
Op, when you do custom and the values are - 55mm do you change it to - 45 to raise the car?
|
I have had the OBD 2 lowering module for over two years. Love it. I mainly use the low setting for attending Cars and Coffee events. Boy does the vehicle get attention. I highly recommend it. Very user friendly. It works.
https://cimg6.ibsrv.net/gimg/www.mbw...29a99b7942.jpg https://cimg7.ibsrv.net/gimg/www.mbw...ba372a2f31.jpg https://cimg8.ibsrv.net/gimg/www.mbw...ef078c81dd.jpg |
And I want your car..... ;)
|
If you are talking to me (Chris The Swede). Thank you very much. I think everyone has some pretty sweet rides in the forum. Including your vehicle. We will have to trade sometime. Maybe I can bring the car to Sweden and we could open her up. lol. Well have an amazing day.
|
Originally Posted by phatisfy
(Post 7629647)
stock height is 32 Front/Rear. If you want to raise back up to stock just use the first option( Factory). Custom mode basically let you adjust how low or low you want to go. Low setting is a pre-set setting for lowered look. You can bring the car back up by either using the (factory) mode. Or just adjust it to how high you want the car to raise under (custom) setting. Hope that help. |
Originally Posted by SkforzaGroup
(Post 7635205)
sorry to clarify my question. If i want to lower it by 10MM do i go -42 or -22? thank you
|
Originally Posted by barryrobinson19
(Post 7630688)
I have had the OBD 2 lowering module for over two years. Love it. I mainly use the low setting for attending Cars and Coffee events. Boy does the vehicle get attention. I highly recommend it. Very user friendly. It works.
https://cimg6.ibsrv.net/gimg/www.mbw...29a99b7942.jpg https://cimg7.ibsrv.net/gimg/www.mbw...ba372a2f31.jpg https://cimg8.ibsrv.net/gimg/www.mbw...ef078c81dd.jpg |
Thank you very much. Here are some interior shots. The car is truly amazing and is a piece of art. LOL. The 2019's are nice, however this is the last of the Mercedes big block twin turbo, per say. Another words, from the 5.5 to the 4.0 liter. Have an amazing 2019.
https://cimg6.ibsrv.net/gimg/www.mbw...51c8e25a99.jpg https://cimg5.ibsrv.net/gimg/www.mbw...7e6aa37c5e.jpg https://cimg7.ibsrv.net/gimg/www.mbw...288909b3a1.jpg https://cimg8.ibsrv.net/gimg/www.mbw...851dbabee6.jpg https://cimg9.ibsrv.net/gimg/www.mbw...203d265501.jpg https://cimg0.ibsrv.net/gimg/www.mbw...92b6f3d484.jpg https://cimg1.ibsrv.net/gimg/www.mbw...fa52644adc.jpg https://cimg4.ibsrv.net/gimg/www.mbw...5b9426e589.jpg https://cimg5.ibsrv.net/gimg/www.mbw...3d3d5a4ae4.jpg https://cimg1.ibsrv.net/gimg/www.mbw...704fba7d89.jpg |
Originally Posted by barryrobinson19
(Post 7644810)
Thank you very much. Here are some interior shots. The car is truly amazing and is a piece of art. LOL. The 2019's are nice, however this is the last of the Mercedes big block twin turbo, per say. Another words, from the 5.5 to the 4.0 liter. Have an amazing 2019.
https://cimg6.ibsrv.net/gimg/www.mbw...51c8e25a99.jpg https://cimg5.ibsrv.net/gimg/www.mbw...7e6aa37c5e.jpg https://cimg7.ibsrv.net/gimg/www.mbw...288909b3a1.jpg https://cimg8.ibsrv.net/gimg/www.mbw...851dbabee6.jpg https://cimg9.ibsrv.net/gimg/www.mbw...203d265501.jpg https://cimg0.ibsrv.net/gimg/www.mbw...92b6f3d484.jpg https://cimg1.ibsrv.net/gimg/www.mbw...fa52644adc.jpg https://cimg4.ibsrv.net/gimg/www.mbw...5b9426e589.jpg https://cimg5.ibsrv.net/gimg/www.mbw...3d3d5a4ae4.jpg https://cimg1.ibsrv.net/gimg/www.mbw...704fba7d89.jpg |
Thank you S63AMG888. Love it. I just gave it a good bath today. Very shiny.
|
|
Anyone running custom mode? And if so what's the mm youre Running @?
|
Originally Posted by SkforzaGroup
(Post 7653554)
Anyone running custom mode? And if so what's the mm youre Running @?
https://cimg3.ibsrv.net/gimg/www.mbw...97e4baf67.jpeg I only use custom mode when I’m parked or at shows/meetings. I have it set to it’s lowest setting possible. |
Damn. What's the ride like...?
|
Originally Posted by SkforzaGroup
(Post 7654317)
Damn. What's the ride like...?
|
Amazon OBD-2 Lowering module
Originally Posted by phatisfy
(Post 7654404)
Never had tried driving like that. You’ll see it only like that when parked. |
https://cimg5.ibsrv.net/gimg/www.mbw...eb26066ad.jpeg https://cimg8.ibsrv.net/gimg/www.mbw...3cd579206.jpeg https://cimg1.ibsrv.net/gimg/www.mbw...cb13cc4d2.jpeg Here is my car in the low setting. I think by going wider than stock size tires filled the fender wells better for me without using spacers. |
Originally Posted by S63AMG888
(Post 7683293)
https://cimg5.ibsrv.net/gimg/www.mbw...eb26066ad.jpeg https://cimg8.ibsrv.net/gimg/www.mbw...3cd579206.jpeg https://cimg1.ibsrv.net/gimg/www.mbw...cb13cc4d2.jpeg Here is my car in the low setting. I think by going wider than stock size tires filled the fender wells better for me without using spacers. |
Originally Posted by phatisfy
(Post 7683328)
Try 35mm front & 55mm rear in custom setting. I think it gives the car a more even stance? |
How's the ride for some of you guys that are lowered? Being lowered the ride seems rough.
And did.you guys get an alignment? |
All times are GMT -4. The time now is 05:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands