Brabus Diffuser/Exhaust on 2019 S63 Sedan
 

Hello, currently upgrading my S63 with Brabus modifications. Does anyone know if the Brabus diffuser would fit on the 18/19 S63 if you just swapped the AMG exhaust tips for Brabus? Or would you have to change the entire exhaust system? I love the new exhaust on the facelift and would rather keep it stock. (Not to mention save 9k). Thank you!

You can not purchase just diffuser from brabus, you have to purchase the whole exhaust too.

I can get the diffuser by itself but I am being told it will not fit on AMG tail pipes.

You can buy the Brabus diffuser and just the Brabus exhaust tips, no need to get the whole Brabus exhaust system.

The W212 E63s owners do it all the time and they are knock-offs.

https://www.rwcarbon.com/mercedes-w2...-diffuser.html

`


RW CARBON -

+1


Thank-You
D.B.


.

You can not buy authentic diffuser by itself from brabus, please let me know if you find out otherwise, and from who

I bought few authentic pieces directly from brabus and thats what I been told, rear diffuser can only be purchased with exhaust system, check their website too

3W Distributing
Henry Wang

Are we talking about face lift car or pre?

If you don’t mind spending the money to buy authentic Brabus diffuser and exhaust system that would rock. But if you just want the look without the Brabus tax, there are plenty of options.

To answer OP, question. You do not need to buy the full exhaust system, but you will need to have the Brabus exhaust tips, the diffuser will not fit the factory exhaust tips. You can buy the authentic Brabus diffuser and get the aftermarket Brabus tips or Vice versa. Or just get the aftermarket diffuser and tips.

Facelift. My car is a 19. Tell him Eric sent you

Thx. I want the authentic brabus diffuser without changing the exhaust. The new stock exhaust is incredible, absolutely no point changing it

Yeah, your stock tips will not fit the Brabus diffuser. You can buy just the Brabus tips and not the whole exhaust system though.

And the stock exhaust pipes will line up perfectly with the brabus diffuser?

No it will not. The Brabus diffuser weather it’s authentic or aftermarket, the stock exhaust will not fit. You will need to have the Brabus tips only have have a exhaust shop cut the stock tips off and wield the Brabus tips on the exhaust pipes. The exhaust shop should not charge more than $150 to cut off the stock tips and wield Brabus tips on. Hope this helps.

I meant the exhaust pipes not the tips. We have established that we need brabus tips for brabus diffuser as amg ones won’t fit. I don’t think the tips are welded on. They are cosmetic, think bolted.

Where can I buy just the authentic brabus tips? My distributor says it’s only available with the exhaust system

`


I would be amazed if none of the Dealers

on this list had a set of exhaust tips - for sale -

https://brabususa.wordpress.com/dealers/

They might be from a returned/damaged system

and just sitting on a shelf or...

You would do better calling on the phone and

being friendly as opposed to sending an e-mail -

Searching for specialized parts sometimes

requires a more extensive effort -

Good luck and keep your search updated here -


Thank-You
D.B.


.

Ali express has the siilar looking products <----don't kill me just saying.

If anyone has a stock s63 exhaust for sale PM me please

Have the authentic diffuser sitting in my living room. Need tips and RW carbon on backorder for a month. Sigh, any suggestions? These ones off eBay are highly sketch looking. lol

Get the Brabus tips from eBay with a seller with good rating. RW carbon gets ALL their products from China, sometimes with the same eBay seller. Believe me, I know.

Good luck.

I have a vice versa situation. I would prefer the Brabus exhaust without the diffuser as I prefer the stock look, but would like the sound. Is this possible?

Thanks!

Hello friends from MB World!
I need pictures and installation guide / instructions to install Brabus exhaust tips on my w212 amg 2015, I don't know if it's installed on the chassis or not?
Anyone who ever did that can help me?
I bought the tips and the carbon spoiler in China, I asked dozens of them and nobody told me how to settle down, to look for a pro.
The photos they post of the material are all from the outside, you can't see how they are assembled.
Thanks to all who can help me.
greetings