MBWorld.org Forums - Search Results

Go Back  MBWorld.org Forums > Search Forums
Reload this Page >

Search Results

Notices
Search: Posts Made By: MBNRG
Showing results 1 to 134 of 134
Search took 0.09 seconds.
06-02-2019, 01:54 AM
Replies: 87
Views: 8,520
Posted By Diabolis

Jim - that sucks. If this ends up falling though...

Jim - that sucks. If this ends up falling though and you're still looking for a roll bar, I know of a professional race support team based at Buttonwillow (they look after an AMG GT4 and a Norma M30...
05-06-2019, 12:28 AM
Replies: 57
Views: 5,698
Posted By BLKROKT

Those look great Kevin. Can you tell us anything...

Those look great Kevin. Can you tell us anything about the construction and benefits of using yours vs OEM other than “better and stiffer”? Also, I assume your tool will also press in the new...
05-06-2019, 12:08 AM
Replies: 57
Views: 5,698
Posted By K-Mac

Have attached pic of K-MAC subframe bush. At...

Have attached pic of K-MAC subframe bush. At present designing throw away bush extraction tools to allow both the 2 diff bushes and the 2 sizes of sub frame bushes to be removed on vehicle – which is...
05-05-2019, 09:40 PM
Replies: 57
Views: 5,698
Posted By Crya

He pmd me last week that he did in fact have 3...

He pmd me last week that he did in fact have 3 sets. No actual pics available at the time. I had to hold off as I was just doing my ECE mounts and Id love to hear from someone whos actually...
04-17-2019, 12:48 AM
Replies: 57
Views: 5,698
Posted By K-Mac

Hi All all the input! Makes one reflect re...

Hi All all the input! Makes one reflect re taking the easy way, following others and just sitting on the fence, no criticism doing nothing flawlessly!!

Recall German company that copied a...
04-16-2019, 10:36 AM
Replies: 57
Views: 5,698
Posted By BLKROKT

Just looked at my KMAC invoice from early 2017....

Just looked at my KMAC invoice from early 2017. Here’s what I got - it was everything available for the C63 at the time:

* Already had the Front Camber and Caster Strut tops (full Race)

1....
04-16-2019, 10:16 AM
Replies: 57
Views: 5,698
Posted By BLKROKT

Hey Kevin. With all due respect because you’re a...

Hey Kevin. With all due respect because you’re a good dude and provide great service, many of us - myself included - have tried your product, then removed some of it to go in a different direction....
04-13-2019, 11:26 PM
Replies: 329
Views: 41,986
Posted By Doc Oc

Well, it doesn't do anything on the dyno, that's...

Well, it doesn't do anything on the dyno, that's for sure, but at 80 mph, who knows? Airflow would need to be logged. We're not just talking about the engine breathing, but also what turbulence, if...
04-13-2019, 11:26 AM
Replies: 329
Views: 41,986
Posted By Doc Oc

Damn I hate to jump in this one but I can help...

Damn I hate to jump in this one but I can help clear up part of the debate. I work part time in a dyno/hot rod shop and have ran the car too many times to count. Unfortunately there's no power to be...
04-11-2019, 07:04 PM
Replies: 87
Views: 8,520
Posted By BLKROKT

Went over to Studio RSR today to take a look...

Went over to Studio RSR today to take a look around and see the progress on my cage. They’re working on all sorts of cool stuff, just finished an exoskeleton Lambo which was unveiled today and had a...
04-10-2019, 05:38 PM
Replies: 57
Views: 5,698
Posted By BLKROKT

Gauging Interest in Developing New Chassis & Suspension Solutions

Hey everyone. I’m trying to optimize every part of my chassis and suspension for track duty, and have already exhausted everything that’s on the market and more. I’ve recently been in touch with a...
04-06-2019, 12:20 AM
Replies: 8
Views: 498
Posted By BLKROKT

Your username is very appropriate.

Your username is very appropriate.
03-15-2019, 02:04 AM
Replies: 87
Views: 8,520
Posted By Diabolis

Hi Jim, I asked both of my cage builders (at...

Hi Jim,

I asked both of my cage builders (at different shops) and both of them said the same thing - 99% of the time they use 1.75" x 0.120" DOM steel tubing for sports / GT cars. It is compliant...
03-12-2019, 02:47 AM
Replies: 6
Views: 678
Posted By Diabolis

Sorry for the delay MBNRG. Yes, 255/35s fit...

Sorry for the delay MBNRG. Yes, 255/35s fit perfectly on the 9" ET40 fronts.

Seeing as it is USUALLY the tire that ends up rubbing, those should both work assuming that you get the offsets right....
03-07-2019, 09:09 PM
Replies: 22
Views: 1,437
Posted By Vladds

So here's how the part numbers look like: They...

So here's how the part numbers look like:
They start with A1560300820, then they go through 5 generations..
This is weird, these engines must have a problem with con rods that these people were...
03-07-2019, 07:33 AM
Replies: 6
Views: 686
Posted By Vladds

Any software updates anybody ever got from dealer?

As I was watching the other day a BMW video oin youtube, the guy complained that in US nobody at the dealer seems to be competent enough to look for and apply software updates to the cars, as they...
03-02-2019, 08:54 PM
Replies: 268
Views: 46,198
Posted By c63panda

Think I found my anti lift bracket. I was worried...

Think I found my anti lift bracket. I was worried about access but I think I found my solution. Spark plug wire holders. It'll support it from underneath the plate and also hold a bolt on each...
02-26-2019, 08:41 PM
Replies: 6
Views: 678
Posted By Mort

I am currently running a 9x20 ET +34 with a...

I am currently running a 9x20 ET +34 with a 255/30zr20 on the front (unmodified fender) of my car without issue. I have run a 9.5x20 ET +40 with a 245/30zr20. The problem I had with the 9.5 x 20 was...
02-26-2019, 08:46 AM
Replies: 6
Views: 678
Posted By Diabolis

I am running 19x9 ET 40 fronts and 19x10 ET 50...

I am running 19x9 ET 40 fronts and 19x10 ET 50 rears (on a Canadian APX car which is 10mm lower than US variants) with MPS4S 255/35-19 and 275/30-19 respectively and have not observed any rubbing...
02-25-2019, 07:29 PM
Replies: 6
Views: 678
Posted By Mort

I have run a 10" x 19" ET +52 on my car. On a...

I have run a 10" x 19" ET +52 on my car. On a stock height car a 275/30/19 should be a good fit. On my lowered 2010 C63 the right rear snicked a bit on dips. I changed to 265/30/19 and used those on...
02-14-2019, 12:24 PM
Replies: 20
Views: 821
Posted By Crya

Thanks all. This is what I need. I intend to...

Thanks all. This is what I need. I intend to replace that hardware when I install the new Syncro Upper Control Arms that Kyle at FCP was kind enough to set me up with. Will report back once they're...
02-10-2019, 09:38 PM
Replies: 10
Views: 731
Posted By AwdthisC63

if you have the 156 # the part supersedes to the...

if you have the 156 # the part supersedes to the 159 # to use. Not sure if its pre facelift or facelift change. Ive only seen early models m156. Just oil leak. Ill see if I can come up with any...
02-10-2019, 05:55 PM
Replies: 10
Views: 731
Posted By BLKROKT

Nice find. Go to 4:50 :y I wonder if as they...

Nice find. Go to 4:50 :y

I wonder if as they say, excessive heat on that o-ring (for cars that are tracked for example), could cause it to harden and fail? Don’t know if the AMG “fix” was just to...
02-10-2019, 12:00 PM
Replies: 10
Views: 731
Posted By BLKROKT

Obscure M156 failure point?

Oil Pressure Relief Piston O-Ring Failure

Ever hear of this one? https://oppositelock.kinja.com/in-which-the-mighty-m156-is-taken-apart-for-a-2-00-o-r-1651935795

Forgot how I stumbled across...
01-28-2019, 01:15 PM
Replies: 23
Views: 2,514
Posted By BLKROKT

Not yet. Most seem to ignore the errors. What I’m...

Not yet. Most seem to ignore the errors. What I’m worried about is not only the irritating errors/warnings, but more importantly if the SRS system will still operate normally. Many systems take into...
01-21-2019, 02:34 PM
Replies: 45
Views: 4,618
Posted By SatelliteMan

Thanks man! The hood sits higher than the...

Thanks man! The hood sits higher than the pre-facelift, I like it a lot more - its aggressive. We're doing a run to Ballast Point on Saturday. Meeting at "The Point" in El Segundo for Cars and...
01-16-2019, 03:29 PM
Replies: 20
Views: 783
Posted By olszowa12

FS: Carbon Fibre US-spec Cupholder Trim for W204 C63 AMG

Hi Guys,

I have a brand new US-spec CF cupholder trim for sale. The chrome trim was sanded down and painted gloss black. It looks incredible - much better than the chrome part.
Price: 200 USD +...
01-04-2019, 01:29 PM
Replies: 24
Views: 1,357
Posted By FCPEuro

The ride is no harsher fortunately, steering feel...

The ride is no harsher fortunately, steering feel is noticeably improved.

--Kyle
12-31-2018, 04:57 PM
Replies: 21
Views: 2,540
Posted By dlefty

Going back to my previous W204, Michelin Pilot...

Going back to my previous W204, Michelin Pilot Super Sports. ZERO rubbing, even with trunk loaded up and 2 people in back seat.
19x10 +50 with 275/30-19
Fronts were 19x8.5 with 245/35-19
Fronts...
12-30-2018, 05:42 PM
Replies: 21
Views: 2,540
Posted By AMGonFire

If you want to run a 10 inch rear wheel you are...

If you want to run a 10 inch rear wheel you are going to need an over 50 et around 54 and a 275 could be done on stock suspension. if your going to lower it you will probably rub and 265 would be...
12-25-2018, 02:06 PM
Replies: 25
Views: 1,810
Posted By BLKROKT

If anyone’s interested Winding Road Racing is...

If anyone’s interested Winding Road Racing is having a sale on Sparco Evo2’s right now, plus you get another 5% for signing up to their mailing list (or another 10% for being a NASA member). Mine are...
12-21-2018, 11:45 AM
Replies: 245
Views: 24,468
Posted By blackbenzz

The pics show incorrect installation. I was...

The pics show incorrect installation. I was probably the first to put a custom DSS CF shaft on an AMG (CLK55) and it looks very similar to this shaft and it installs opposite to the pictures.

If...
12-03-2018, 03:01 PM
Replies: 34
Views: 5,057

We are currently in testing and working on...

We are currently in testing and working on getting the first few sets of camshafts out to the customers who have chosen to take place in our testing phase, we wont do a full public release until...
11-23-2018, 10:46 AM
Replies: 1
Views: 489

Black Friday Deals Inside!

https://cimg6.ibsrv.net/gimg/www.mbworld.org-vbulletin/1600x1600/vrpblackfridayad_010dd966105714c43b8c8b55db20cf46b77bfb10.jpg
>>>SHIP NOW<<< (https://vrpspeed.com/)
11-14-2018, 11:06 AM
Replies: 3
Views: 813

Throttlebody Upgrade Group Buy C63 + all M156

We are offering our Throttle body Upgrade kits at group buy pricing.

Plate retail is $1100, Group buy price $800
82 Kit retail $1600, Group Buy $1250
85 Kit retail $2200, Group But $1700
...
11-12-2018, 11:37 AM
Replies: 87
Views: 8,520
Posted By Diabolis

Just a word of caution guys. As nice as that roll...

Just a word of caution guys. As nice as that roll bar looks, the portion where the main hoop connects to the rear cross members is connected by two Allen key bolts. Furthermore, without reinforcement...
11-11-2018, 02:54 PM
Replies: 25
Views: 1,397
Posted By BLKROKT

Nobody cares about this gay **** here. Loser.

Nobody cares about this gay **** here. Loser.
10-25-2018, 08:21 AM
Replies: 97
Views: 8,630
Posted By BLKROKT

Made a new set for one of the local guys. Think...

Made a new set for one of the local guys. Think these came out better than mine.

PM me if anyone is interested in a set. If I order parts in bulk I can probably get the cost down.

...
10-24-2018, 07:36 PM
Replies: 4
Views: 964
Posted By Vladds

I came across the part number for the no sunroof...

I came across the part number for the no sunroof panel. Looks like there is a separate front reinforcement and central reinforcement pieces associated with it.
10-24-2018, 09:21 AM
Replies: 87
Views: 8,520
Posted By Diabolis

You'll be able to fit everything except cereal...

You'll be able to fit everything except cereal (unless it is camouflaged or hidden in a paper bag)... exposed cereal has no place being transported in a track car even when it is a cargo hauling one....
10-23-2018, 05:31 PM
Replies: 13
Views: 826
Posted By deadlyvt

It was a complete carbon fibre roof someone used...

It was a complete carbon fibre roof someone used to manufacture them I believe evosport sold it and it was made by vorsteiner .... i was thinking of messaging them and seeing if they still made them...
10-08-2018, 10:33 AM
Replies: 22
Views: 2,554
Posted By Vladds

Ford Motor Racing fueling white paper...

Ford Motor Racing fueling white paper (https://performanceparts.ford.com/download/pdfs/ProperlySelectingEFIComp.pdf)

Here's an interesting article. Still no mention about why tight fuel injectors...
10-08-2018, 09:06 AM
Replies: 22
Views: 2,554
Posted By Vladds

I am reading that the injector flow rates on a...

I am reading that the injector flow rates on a returnless system need to be particularly close. Don't know why yet.
And that there can be benefits from replacing the fuel rail, because the far end...
10-05-2018, 06:02 PM
Replies: 31
Views: 1,574
Posted By Mort

Anterior means closer to the front and is...

Anterior means closer to the front and is referencing the holes closest to the cross bar. That position will yield a stiffer mounting position. I would tend to try the rear (posterior) position...
10-02-2018, 11:08 AM
Replies: 31
Views: 1,574
Posted By Crya

Damnit! Missed out on free shipping. LOL, guess I...

Damnit! Missed out on free shipping. LOL, guess I was too excited when I found the sale...
Here's your install info:
Front-...
10-01-2018, 06:49 PM
Replies: 11
Views: 595
Posted By Duffer4126

from Summit.... if your installing without...

from Summit.... if your installing without passenger seat I would get a fixed mount...

...
10-01-2018, 12:43 PM
Replies: 31
Views: 1,574
Posted By Crya

PSA- Eibach Sway Bars ON SALE!

For anyone not following the other sway bar discussion, by mere chance Eibach is having a sale on front, rear, or combo for the bars! $126 for front bar, plus tax and shipping still less than...
09-19-2018, 11:10 PM
Replies: 275
Views: 42,021
Posted By skratch77

Here are my 82mm velocity stacks ...

Here are my 82mm velocity stacks

https://cimg0.ibsrv.net/gimg/www.mbworld.org-vbulletin/980x2000/screenshot_20180919_230423_gallery_887b8536ff654c16781dc7efe6d9a10f8d0e25aa.jpg...
09-10-2018, 07:58 AM
Replies: 30
Views: 2,303
Posted By Jasonoff

Can you maybe start providing value here instead...

Can you maybe start providing value here instead of this garbage?

It's obvious you intentionally instigated the response and it's getting old.
08-16-2018, 04:16 PM
Replies: 16
Views: 1,522
Posted By amxc320wagon

J S Benz in miami , computer exchange,, one of...

J S Benz in miami ,
computer exchange,, one of the guys there said he could change the gearing.setup in any tcu. example 3.07 to 3.46 not sure of the others there are one or two in Texas and same...
08-13-2018, 11:04 PM
Replies: 7
Views: 838
Posted By BLKROKT

Agree with the above. BUT... I had...

Agree with the above.

BUT...

I had carbon hood vents installed that have no trays. I can attest that they make a difference in temps. However, without those trays, water dumps directly on...
08-07-2018, 08:19 AM
Replies: 10
Views: 853
Posted By Vladds

I found my previous posting about lifters part...

I found my previous posting about lifters part numbers.
Here it is:
Ok:Looks like there are 4 series of SLS/197.Perhaps they had a facelift too.

The tappets are A 156 050 02 25 and A 159 050 00...
06-07-2018, 01:26 AM
Replies: 2
Views: 714
Posted By cm60k

C63 BS:- *Spare wheel; 6.5x19", (ET14) ...

C63 BS:-

*Spare wheel; 6.5x19", (ET14)

*Tire; 175x50-19"

MB #: "212 400 42 00"
...
06-06-2018, 11:17 PM
Replies: 2
Views: 714
Posted By leungsta

Ill check mine tomorrow if nobody else happens...

Ill check mine tomorrow if nobody else happens to give you an answer!
06-06-2018, 08:45 AM
Replies: 25
Views: 2,023
Posted By Jasonoff

Yeah my bad, didn't notice it said rear. A...

Yeah my bad, didn't notice it said rear.

A 001 990 08 14 was the same part# I found in the WIS for front retainer to knuckle bolt.
06-06-2018, 04:21 AM
Replies: 25
Views: 2,023
Posted By cm60k

*Front bolts should be (M14x32), with # "001 990...

*Front bolts should be (M14x32), with # "001 990 08 14"

*Rear bolts should be (M12x35), with # "018 990 00 01"

-;ZAYED;-
05-30-2018, 07:10 PM
Replies: 195
Views: 23,387
Posted By BLKROKT

If you upgrade the C63 properly - with particular...

If you upgrade the C63 properly - with particular focus on cooling, suspension and brakes - the car can be a very capable track toy. For 30-45min sessions easy. I’m preparing it to go into NASA TT2,...
04-27-2018, 06:29 AM
Replies: 54
Views: 4,876
Posted By mr747

https://cimg3.ibsrv.net/gimg/www.mbworld.org-vbull...

https://cimg3.ibsrv.net/gimg/www.mbworld.org-vbulletin/1600x900/img_20180427_wa0006_01c7b5b3efaf78ba06bcfcb12b774dceaab7abe5.jpg
So finally got the results for the GEN3

what surprises me is how...
04-24-2018, 11:45 PM
Replies: 275
Views: 42,021
Posted By BLKROKT

Nope. Didn’t log anything. Too busy with like 3...

Nope. Didn’t log anything. Too busy with like 3 other things connected to my iPhone. Car ran like an absolute monster. The TBs have made a huge difference in midrange and low-end torque, coming out...
04-20-2018, 08:00 PM
Replies: 25
Views: 2,023
Posted By Jasonoff

Caliper to retainer ...

Caliper to retainer
https://www.mercedes-benz-shop.ca/en/Mercedes-Benz-Front-Brake-Caliper-Bracket-Retaining-Bolt/p/A0039907905

Retainer to knuckle...
04-20-2018, 01:12 PM
Replies: 13
Views: 1,812
Posted By East Coast Euro

ESS Supercharger 1/4 Mile

Got a chance to run our shop C63 with ESS Supercharger, longtube headers and our engine and transmission mounts at the track today. 6psi low boost pulley and 93 octane with full interior to get...
04-07-2018, 09:08 PM
Replies: 156
Views: 27,210
Posted By kavik

https://mbworld.org/forums/c63-amg-w204/699352-c63...

https://mbworld.org/forums/c63-amg-w204/699352-c63-19-w205-wheels-w204-pics.html wheels

Ugh so I got to drive my car just a little while. I'm having power steering issues, I don't...
02-19-2018, 08:27 AM
Replies: 63
Views: 7,160
Posted By East Coast Euro

You're welcome! The bottom of the ESS does...

You're welcome!

The bottom of the ESS does not contact the engine valley. It bolts up to the heads but the supercharger has the map sensor bolted to the bottom of it and even that has clearance....
02-17-2018, 12:50 AM
Replies: 72
Views: 8,620
Posted By Doc Oc

Q5 actually

Q5 actually
02-06-2018, 08:42 PM
Replies: 43
Views: 21,892
Posted By Vladds

http://www.youtube.com/watch?v=pYnoM1InAjY ...

http://www.youtube.com/watch?v=pYnoM1InAjY

He uses 10W60.and he has them coming back at 60 000 Km "it looks perfect inside".

For temperate climate, this may not be the best however.
02-02-2018, 11:24 AM
Replies: 71
Views: 5,891
Posted By Nando_514

I've got a buddy that fabs/welds custom exhausts...

I've got a buddy that fabs/welds custom exhausts for a shop in Jersey. I wouldn't mind hitting him up to see if he'd be willing to help. His welds are beautiful (see below). Let me know guys

On a...
01-31-2018, 11:53 PM
Replies: 71
Views: 5,891
Posted By LSAMG

@Mazspeed,@BLKROKT [email protected], Funny this came up....

@Mazspeed,@BLKROKT [email protected], Funny this came up. I was just thinking about asking the guys that did my Cog Setup for my VW to take a look at this. One of the owner's Dad has a Government Contract,...
01-31-2018, 09:13 PM
Replies: 71
Views: 5,891
Posted By BLKROKT

Just wanted to update this thread. I’ve tracked...

Just wanted to update this thread. I’ve tracked down a few of the elusive rear lower control arm braces that were discontinued by Ultra Racing. Must be leftover stock. They’re on eBay here, and while...
12-30-2017, 05:22 PM
Replies: 15
Views: 1,004
Posted By BLKROKT

This guy seems to be popular in the DSM and GTR...

This guy seems to be popular in the DSM and GTR crowd. Uses high-grade USA components. http://www.curtbrownracing.com/ceramic-bearings.html

He does custom work. I’m going to give him a call next...
12-10-2017, 05:52 AM
Replies: 1
Views: 583
Posted By yx-Daniel

It will also not work with the OEM C63 Black...

It will also not work with the OEM C63 Black Series caliper combined with the 390mm disk.
This year I tried the 507 wheels, but had to go back to the standard 19" AMG multi-spoke-wheels ...
The...
11-21-2017, 01:20 PM
Replies: 11
Views: 890
Posted By zcct04

Here's an interesting article that describes the...

Here's an interesting article that describes the initial reports of a couple unexpected airbag deployments and the subsequent investigation process. Good detective work!
Chronology of...
11-20-2017, 04:19 PM
Replies: 11
Views: 890
Posted By pbaylog

OP: I've not seen anything yet about the safety...

OP: I've not seen anything yet about the safety recall you mentioned.

It is NHTSA Recall #17V627.....here's the link

https://static.nhtsa.gov/odi/rcl/2017/RCLRPT-17V627-3292.PDF
11-12-2017, 09:45 AM
Replies: 6
Views: 613
Posted By Vladds

How many times could you tune our cars, to try...

How many times could you tune our cars, to try different things414782
11-05-2017, 10:14 PM
Replies: 6
Views: 613
Posted By Vladds

While all W204 sedans C63 have the same curb...

While all W204 sedans C63 have the same curb weight, the 2014 coupe is 11 lb heavier and the edition 507 coupe is 42 lb heavier. The 507 sedan is not heavier than the regular sedan.
11-05-2017, 08:01 PM
Replies: 6
Views: 613
Posted By Vladds

There is a computer shut down time for the ECU,...

There is a computer shut down time for the ECU, base time is 5 seconds but depending on system status can take several minutes. This is what screwed me over when I was trying to implement the changes...
10-13-2017, 12:40 PM
Replies: 3
Views: 1,181
Posted By Plutoe

Attached find the C pillar removal...

Attached find the C pillar removal instructions------the rest is very straight forward
10-11-2017, 07:21 AM
Replies: 10
Views: 2,110
Posted By Vladds

That unit in the picture made no sense to me. ...

That unit in the picture made no sense to me.
On one side of the hose it has hydraulic fittings that seem to be machine crimped and good for 200 PSI, on the other it has hose worm clamps that are...
08-23-2017, 01:02 PM
Replies: 80
Views: 10,528
Posted By JimGnitecki

When dealing with high oil OR coolant...

When dealing with high oil OR coolant temperatures, the best guys to talk to are the shops and guys who do a lot of "street rods", especially Deuce Coupes (1932 Ford based hot rods).

Those cars...
08-22-2017, 03:00 PM
Replies: 80
Views: 10,528
Posted By akshay1234

This seems to be an issue with all vehicles with...

This seems to be an issue with all vehicles with the M156. Comparing to the competition like M vehicles, the oil temperature in those never goes above 105-110 maybe 115 no matter how much you push...
08-22-2017, 12:41 PM
Replies: 38
Views: 3,834
Posted By bentz69

So another dyno thread :P

*Update post #29 with another dyno session after installing headers*

Wanted some baseline numbers and comparision between the stock tune, eurocharged V6 and V7. Gives a baseline before I install...
08-18-2017, 11:10 AM
Replies: 51
Views: 3,599
Posted By BLKROKT

I can practically guarantee you that anyone who...

I can practically guarantee you that anyone who has installed LTH on their C63 without coating them first, once they're on wishes that they had done so (assuming that they understand what it does...
08-14-2017, 07:15 PM
Replies: 41
Views: 3,597
Posted By C63fora2w1

Weather permitting im going to make a few passes...

Weather permitting im going to make a few passes at Thunder Valley raceway in Lexington Oklahoma.. Altitude here is 1033ft as compared to 5300 of Albuquerque dragway. I just got a new set of MPSS so...
08-14-2017, 01:21 AM
Replies: 12
Views: 774
Posted By Merc63

45,000km/28,000 mile Weistec Stage 3 report

Ive had this stage 3 installed for nearly 45,000km now, I think its been around 4-5 years. Completely reliable.

We just got back from another 2500km road trip to BC, where we did about...
08-12-2017, 01:26 PM
Replies: 19
Views: 1,314
Posted By BLKROKT

re: All the threads about headers being too loud

Dear C63 owners who have installed Long Tube Headers and are now complaining in every other thread that they're too loud. What did you expect?

Please grow a pair of balls you girls

Sincerely
07-30-2017, 04:45 AM
Replies: 44
Views: 6,089
Posted By BLKROKT

Yes that's them

Yes that's them
07-19-2017, 10:49 PM
Replies: 119
Views: 7,873
Posted By Jasonoff

I and others have posted this before, but this is...

I and others have posted this before, but this is an excellent explanation of how some of this stuff works.
...
07-16-2017, 07:23 AM
Replies: 275
Views: 42,021
Posted By BLKROKT

Well, here's the deal guys. They're from some...

Well, here's the deal guys. They're from some random Russian guy who nobody knows, and off of scam-ridden eBay, so there's still a lot that can go really wrong here. Mine should be on the way...
05-01-2017, 05:38 PM
Replies: 44
Views: 6,089
Posted By BLKROKT

I bought them direct from Eibach since the Tire...

I bought them direct from Eibach since the Tire Rack didn't have them in stock. Let me see if they fit, I'll confirm back here either way.
04-25-2017, 04:56 PM
Replies: 127
Views: 12,801
Posted By BLKROKT

So, since this is my "Track Build" thread now,...

So, since this is my "Track Build" thread now, and I just got back from a couple days at Watkins Glen..... where to begin. Well I went up early on Sunday to watch Wobble64 and his new race team...
04-18-2017, 08:48 PM
Replies: 245
Views: 24,468
Posted By kjkidd21

Alright gentlemen, I'd say this group buy is a...

Alright gentlemen, I'd say this group buy is a "GO" at this point.

I am going to reach out to Frank on Friday of this week with a FINAL list of who is participating in this group buy. Below there...
04-15-2017, 12:58 PM
Replies: 245
Views: 24,468
Posted By Asher4799

When Kjkidd is back in town he and I will pool...

When Kjkidd is back in town he and I will pool everyone's PM's and get all of your screen names and first manes to DSS so they can start building the drive shafts. From there you guys will need to...
04-15-2017, 12:50 PM
Replies: 245
Views: 24,468
Posted By Asher4799

yes it will handle it I'm stage three with...

yes it will handle it I'm stage three with nitrous ported polished fully built motor. Not an issue from what DSS said.
04-15-2017, 06:26 AM
Replies: 245
Views: 24,468
Posted By mr747

Here are the screen shots

Here are the screen shots
04-07-2017, 10:14 AM
Replies: 37
Views: 7,185
Posted By mr747

Finally finally finally

Finally

Spewing I got booted out would of went even faster
03-12-2017, 04:11 PM
Replies: 17
Views: 1,976
Posted By dekraboy

Exclamation Free Genuine Mercedes-Benz Wiper Blades from MBUSA

Stumbled upon this. Just plug in your address.
Thank me later :y
...
03-06-2017, 11:53 PM
Replies: 97
Views: 8,630
Posted By BLKROKT

Rods came in today ...

Rods came in today

https://cimg9.ibsrv.net/gimg/www.mbworld.org-vbulletin/1640x2000/80-img_5303_6d527f6474dff4b1abe39a5303ea5c5c11bb33f2.jpg

You may have noticed that one of the 7" rods is...
02-24-2017, 01:16 AM
Replies: 59
Views: 8,908
Posted By BLKROKT

Ooooooh a 6yr old thread resurrect! Just...

Ooooooh a 6yr old thread resurrect!

Just ordered these after doing quite a bit of research on them and finally tracking down a full set on eBay. Making my push now to get the car track-ready for...
02-09-2017, 08:58 AM
Replies: 26
Views: 1,701
Posted By msgadget

TODAY IS YOUR DAY!!!

No doubt about it!! :)
01-20-2017, 07:10 AM
Replies: 25
Views: 2,591
Posted By Slow_c63

Be a man about it and just go for it, it's what...

Be a man about it and just go for it, it's what my grandad would say.
01-11-2017, 06:11 PM
Replies: 10
Views: 761
Posted By Mort

Just stay where you are, it will find you.

Just stay where you are, it will find you.
12-31-2016, 03:23 PM
Replies: 27
Views: 1,270
Posted By 604 C63

My dealer tried that. My sales guy (who I...

My dealer tried that.

My sales guy (who I actually really like and recommend) came back with a slip of paper that said $500 on it and he said they needed that much more. I leaned over, crossed...
12-18-2016, 12:11 PM
Replies: 27
Views: 1,039
Posted By AMG3.2

Yes.

Yes.
12-17-2016, 11:47 PM
Replies: 27
Views: 1,039
Posted By m a x i m u s

I believe so. But honestly, it's been about 16...

I believe so. But honestly, it's been about 16 years so I can't be 100% sure. Those images on the website ring a bell, though.
12-08-2016, 06:38 PM
Replies: 18
Views: 1,816
Posted By chrisridebike8

https://mbworld.org/forums/c63-amg-w204/643839-wtb...

https://mbworld.org/forums/c63-amg-w204/643839-wtb-mike-s-power-pipe-straight.html
11-17-2016, 03:31 PM
Replies: 140
Views: 10,849
Posted By BLKROKT

I like this guy Henk. He's my kind of madman. ...

I like this guy Henk. He's my kind of madman.

Please stick around. We need more people like you contributing so that we don't all die of boredom after reading another stupid post about headbolts...
09-20-2016, 07:06 AM
Replies: 4
Views: 401
Posted By Jasonoff

WaveTrac told this guy 75ft-lbs, but I think I...

WaveTrac told this guy 75ft-lbs, but I think I did my to 80ft-lbs --> https://mbworld.org/forums/c63-amg-w204/622164-wavetrac-diff-fitment.html#post6808667

I didn't write down my backlash and it...
09-17-2016, 11:14 AM
Replies: 48
Views: 2,899
Posted By Roswell

Kiva, very sorry to hear about ur step father....

Kiva, very sorry to hear about ur step father. Life can be unfair. Give all the support to ur mom during this difficult time.

U have been a very helpful member here throughout the years, and I...
09-15-2016, 12:41 PM
Replies: 4
Views: 401
Posted By Jasonoff

IIRC there's nothing in the WIS for diff...

IIRC there's nothing in the WIS for diff internals. Just a backlash spec. I am going off rusty memory from 5yrs back though.
09-15-2016, 12:36 PM
09-09-2016, 05:36 PM
Replies: 35
Views: 1,856
Posted By Dogtag114

AMG Lounge Hat Giveaway - Hurry, First Come...

Bam.


http://www.mercedes-amg.com/privatelounge/news/insideAMG/2016_plhat_0908_en
09-08-2016, 09:10 PM
Replies: 64
Views: 4,565
Posted By BLKROKT

Let's not get too worked up here..... ...

Let's not get too worked up here.....

https://cimg6.ibsrv.net/gimg/www.mbworld.org-vbulletin/722x730/80-clipboard01_417f2a728f8d278fccaf0341d2b89d940d376341.jpg

Carbonio Best ET Run: 116.25mph...
09-04-2016, 07:20 PM
Replies: 36
Views: 5,236
Posted By Mazspeed

Oh yeah, the camber plates kick that thickness up...

Oh yeah, the camber plates kick that thickness up a few notches. I'll bet the Mercedes race group will have the right ones. When I am in Monterey on the 18th I will see if anyone down there would...
08-29-2016, 01:29 PM
Replies: 195
Views: 23,387
Posted By hachiroku

titanium brake shims should help with preventing...

titanium brake shims should help with preventing heat transfer in your braking system as well.

https://hardbrakes.com/index.php?main_page=product_info&cPath=6_7_1185_1255&products_id=141
08-28-2016, 11:24 AM
Replies: 195
Views: 23,387
Posted By BLKROKT

Finally done. Had to go get more hot glue sticks...

Finally done. Had to go get more hot glue sticks to attach the mesh this morning. Going to put it on the car. Kept all OE mounting points so the bumper won't be going anywhere. Excited, it looks...
08-27-2016, 08:22 PM
Replies: 195
Views: 23,387
Posted By BLKROKT

Got some spare parts if anyone needs them LOL. ...

Got some spare parts if anyone needs them LOL.

507 DRL surrounds, DRLs, and OE mesh. Make me an offer of you want any of this.

...
08-15-2016, 05:44 AM
Replies: 73
Views: 9,714
Posted By Southways

Hmmmmm... Having conceived, designed,...

Hmmmmm...
Having conceived, designed, prototyped, redesigned, verified, calibrated, tested, validated, productionised, released, and supported a supercharger for this (& many other) platforms... I...
07-29-2016, 08:10 PM
Replies: 22
Views: 1,283
Posted By Adi-Benz

OE Tune Group Buy

The guys in the non-AMG section are getting together to do a group buy at discount, its here if interested to join them: https://mbworld.org/forums/c-class-w204/632053-oe-tune.html
07-29-2016, 06:57 PM
Replies: 16
Views: 660
Posted By BLKROKT

Yeah, sorry to keep bringing it up. You'll enjoy...

Yeah, sorry to keep bringing it up. You'll enjoy the ride.

Been about a half dozen times. Used to drive over for weekends when I lived in London with a bunch of my Porsche buddies. Stay locally...
07-29-2016, 11:42 AM
Replies: 81
Views: 5,107
Posted By TAILWAG

I would post it on FB - have people in your area...

I would post it on FB - have people in your area share the crap out of the video and eventually, someone is bound to know someone that knows someone...that car is plenty recognizable.
Also, that...
07-05-2016, 12:18 AM
Replies: 61
Views: 3,183
Posted By 604 C63

Kinda like in this article? ...

Kinda like in this article?

http://jalopnik.com/the-scariest-thing-about-the-hellcat-is-the-third-owner-1745483727
06-23-2016, 12:06 PM
Replies: 6
Views: 826
Posted By pbaylog

i believe the first round run was north of $200...

i believe the first round run was north of $200 depending on customs fees. Actual purchase price varied because of that. If you search the PL threads on this you'll see the range.
06-19-2016, 08:55 PM
Replies: 6
Views: 507
Posted By Clark Kent

CoTA footage @ BMW event

This weekend was the 4th annual Texas Trifecta at CoTA, sponsored by the BMWCCA. Lots of E46's, E9X's, and F8X's, and of course just enough P GT3's to remind us what a fast car looks like.

Out of...
06-18-2016, 07:52 AM
Replies: 54
Views: 7,563
Posted By hyperion667

I received mine yesterday, a very nice product,...

I received mine yesterday, a very nice product, high quality, paid 215 for them an that included tax.....install today on HRE P40 SC's......will report back on the fit

...
06-17-2016, 12:10 PM
Replies: 54
Views: 7,563
Posted By INS1GNIA

Someone should test out these nw AMG center caps

Someone needs to buy these and see if they will work as the hood emblem. Would be great quality.

"Dear AMG Private Lounge members,

Mercedes-AMG is excited to offer its customers the exclusive...
06-15-2016, 08:03 PM
Replies: 369
Views: 25,308
Posted By chrisridebike8

Alright! I'll feed you, baby birds :) both of...

Alright! I'll feed you, baby birds :) both of these vids are pretty sick. I'm not even sure how they were able to get some of the footage.

This video isn't mine. It's from the West Coast Hornet...
06-14-2016, 11:41 PM
Replies: 369
Views: 25,308
Posted By ArmoE55

Thank you for your service.

Thank you for your service.
06-14-2016, 11:39 PM
Replies: 369
Views: 25,308
Posted By BLKROKT

/thread That's badass man

/thread

That's badass man
06-14-2016, 08:18 AM
Replies: 369
Views: 25,308
Posted By chrisridebike8

See MrDuckBootz. This is the proper way to shut...

See MrDuckBootz. This is the proper way to shut people up. Just ONE photo like this in any of those cars and we will all shut up. You can even blur out your face if you would like.
...
06-12-2016, 01:28 AM
Replies: 123
Views: 32,020
Posted By Mode Carbon

We are pleased to announce the launch of our new...

We are pleased to announce the launch of our new e-commerce website! Please visit www.modecarbon.com (http://www.modecarbon.com) to shop by your vehicle and place an order directly through the ...
05-27-2016, 10:02 PM
Replies: 195
Views: 23,387
Posted By Wobble64

Look at Pegasus Racing for silicone duct (3 inch)...

Look at Pegasus Racing for silicone duct (3 inch) as well as round inlets. They also have prefab mounts to attach the hose in lieu of the dust cover behind the rotor. You may get away with buying one...
05-27-2016, 12:57 AM
Replies: 195
Views: 23,387
Posted By BLKROKT

Brake cooling ducts and modified front bumper

So... I'm about this close to taking a Dremmel to my front bumper in a big way. The reason is that I want to accomplish a few things related to cooling, and secondarily for appearance.

First, I'll...
05-17-2016, 01:21 AM
Replies: 8
Views: 2,333
Posted By zcct04

Tire treadwear rating vs grip

We all know that a lower treadwear rating provides a grippier tire, but I've never seen anything that quantified the relationship.

There's a very good article in the June SportsCar (the SCCA...
12-30-2015, 04:43 PM
Replies: 56
Views: 8,057
Posted By Wobble64

I have used RacingBrake XT970 and cooked/cracked...

I have used RacingBrake XT970 and cooked/cracked them. If you want to push your car and not worry, I would go for dedicated track pads. Unless you do that, there is no benefit from using anything but...
04-12-2015, 11:42 AM
Replies: 37
Views: 8,697
Posted By BLKROKT

Update on this. It worked. :D CEL gone. No...

Update on this. It worked. :D CEL gone. No codes. Also no secondary O2s at all.

For those of you who want to get rid of your secondary O2s completely - either because your headers don't have...
Showing results 1 to 134 of 134


 
Forum Jump

Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.