MBWorld.org Forums - Search Results

Go Back  MBWorld.org Forums > Search Forums
Reload this Page >

Search Results

Notices
 
Search: Posts Made By: larsianer
Showing results 1 to 200 of 216
Search took 0.07 seconds.
Today, 02:14 PM
Replies: 0
Views: 37
Posted By larsianer

central lock wont work w211

i have a w211 2004, that i have changed ecu/eis/gearshifter module from a donor car, but i cant get the central lock to work, i have tryed with both keys, what units control the looking system? i...
Forum: W211 AMG
04-29-2019, 01:57 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

Hi, how do i code a speedometer on a w211?? i...

Hi, how do i code a speedometer on a w211??
i have been trying, but it wont work

ANYONE?
Forum: W211 AMG
12-03-2018, 04:48 AM
Replies: 1,333
Views: 735,811
Posted By larsianer

i have been trying to code folding mirrors, but i...

i have been trying to code folding mirrors, but i cant get it to work, i think am really close for making it, anyone here who can tell me how to do it, step by step
its a w211 2008 220cdi
Forum: W211 AMG
11-29-2018, 04:24 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

is it possible to remove the eco start stop on a...

is it possible to remove the eco start stop on a w212 ???
if yes, can someone share the steps with me, it would help me alot!!
Forum: W211 AMG
11-01-2018, 07:44 AM
Replies: 1,333
Views: 735,811
Posted By larsianer

Transmission is worn out, am i right? Those was...

Transmission is worn out, am i right?
Those was the higest numbers i had


https://cimg2.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x1504/21_831d3da7e78a99e872af9b391ffc5aadfdd8ab2e.jpg...
10-31-2018, 05:37 PM
Replies: 0
Views: 224
Posted By larsianer

retrofit electric steering column w211

Is it possible to retrofit the electric steering column, if it is, what parts do i need
i have a star c4, if i can use my old sam`s
Forum: W211 AMG
10-11-2018, 05:30 AM
Replies: 0
Views: 215
Posted By larsianer

change Shift Module mercedes w211

Hi, i need to change my Shift Module, but i can buy a used one on ebay?
i have a star c4, but if its possible to code a used shift module, where do i do it?
Forum: W211 AMG
09-07-2018, 07:02 AM
Replies: 1,333
Views: 735,811
Posted By larsianer

HI The engine has 170.000km, (i just changed...

HI
The engine has 170.000km, (i just changed engine on my car), about my driving style, city style..cause not heavy foot, cause we have really bad roads, is it possible that you can explain how i...
Forum: W211 AMG
09-06-2018, 08:44 AM
Replies: 1,333
Views: 735,811
Posted By larsianer

we dont have, i live near the north pole,...

we dont have, i live near the north pole, hahaha...but the specs on the picture, it seems ok, right????
Forum: W211 AMG
09-05-2018, 07:14 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

Hi, my w211 220cdi suddenly stalls, when i put it...

Hi, my w211 220cdi suddenly stalls, when i put it in drive, this happens only when its warm, and have been off for like 5mins. when it stalls, it sounds like its one three cylinders, and then it...
09-05-2018, 06:46 PM
Replies: 1
Views: 339
Posted By larsianer

injector problems, with pics from starc4

Hi, my w211 220cdi suddenly stalls, when i put it in drive, this happens only when its warm, and have been off for like 5mins. when it stalls, it sounds like its one three cylinders, and then it...
10-15-2017, 05:03 PM
Replies: 3
Views: 608
Posted By larsianer

yes he does!

yes he does!
10-14-2017, 02:52 PM
Replies: 7
Views: 564
Posted By larsianer

Xentry wont start, cause i cant turn the key!!

Xentry wont start, cause i cant turn the key!!
10-14-2017, 02:13 PM
Replies: 7
Views: 564
Posted By larsianer

thanks for reply, the donor car works, i tryed...

thanks for reply, the donor car works, i tryed both set of keys...
10-14-2017, 12:06 PM
Replies: 7
Views: 564
Posted By larsianer

Ecu and eis change

i have a w211 with a bad ecu, so i took the ecu and eis and the gear level, from the donor car, but the key wont turn, do i need more parts from the donor car?

Both are a 2003 model, 220cdi
Forum: W211 AMG
08-23-2017, 07:36 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

Thank you mackhack Any suggestions on what i...

Thank you mackhack

Any suggestions on what i should do?
Give that car, or go to the dealership?
Forum: W211 AMG
08-23-2017, 07:17 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

Marry ecu and eis/key

I need to change engine control module.(near fromt sam)
So how do i marry these, i will take the ecu with the key and eis
From a wrecked car

Its a w211 220cdi 2003

I guess i just need to code...
08-22-2017, 05:07 PM
Replies: 6
Views: 497
Posted By larsianer

Those mark has nothing to do with timing, is it...

Those mark has nothing to do with timing, is it sensorholes??
Where you mount the sensors?

The alligment marks are under the top lid, on the gears to the timing chain, and on the camshaft,and on...
08-22-2017, 03:41 PM
Replies: 6
Views: 497
Posted By larsianer

Timing on serpentine belt?? The chain need to...

Timing on serpentine belt??
The chain need to be timed right, the serpintine belt runs yoy waterpump, alternator, and ac pump, and power steering pump!

Google those fault codes, and your car will...
Forum: W211 AMG
08-21-2017, 02:08 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

exclamation mark on exentry quick test

i have a mercedes w211 220cdi 2003, that only want to start sometimes

i have tryed to scan the system, and i can get readings of the fault codes on the gearbox, the transmission has a exclamation...
08-11-2017, 05:22 PM
Replies: 1
Views: 279
Posted By larsianer

W211 220cdi wont crank

A 2003 mercedes w211 wont crank, the gear shift indicator pnrd is also gone from the speedometer.

Anyone have any idea of what it can be?
02-19-2017, 03:54 PM
Replies: 3
Views: 246
Posted By larsianer

I am loosing air, near the compressor,i think, i...

I am loosing air, near the compressor,i think, i will try to connect the star tomorrow, it dont sag overnight....
Can the compressor get a internal leak, when it starts to fill air in the springd,...
02-19-2017, 01:58 PM
Replies: 3
Views: 246
Posted By larsianer

Stop car to low

I have problem, with my self leveling air suspension, i keep losing air allmost everyday, it suddenly sags to the ground, and i get the (stop car to low) warning sound,.when this happens, i hear that...
Forum: W211 AMG
02-12-2017, 07:32 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

My problem was solved by mackhack, quickly and...

My problem was solved by mackhack, quickly and efficiently.
now the car runs like a hero again.he even gave me alot of his time, so that he was sure that i understood how to do it.
i give him 11...
Forum: W211 AMG
02-10-2017, 07:53 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

Pm sendt!!

Pm sendt!!
Forum: W211 AMG
02-09-2017, 07:51 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

Pm sendt, do i need to dissengage something on...

Pm sendt, do i need to dissengage something on the xentry pc, so it dont get bricked?(blacklist)
Forum: W211 AMG
02-09-2017, 07:09 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

The mercedes dealers in my town, dont know...

The mercedes dealers in my town, dont know anything, they cant even use the c4 wireless.

About the ecu unlock, it gota be in the cdi section, i think!
I can upload pictures of the meny, if that...
02-09-2017, 06:05 PM
Replies: 5
Views: 473
Posted By larsianer

It dropped air today also, hissing sound from the...

It dropped air today also, hissing sound from the compressor, in the front, i ran out of the car, and i could feel the air,comming out of the hose(see picture)
It was damaged, and allmost in two...
Forum: W211 AMG
02-09-2017, 02:09 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

I dont have the me 2,8 sfi meny, cause i have a...

I dont have the me 2,8 sfi meny, cause i have a cdi i think,you got any other solutions?
Forum: W211 AMG
02-09-2017, 01:44 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

Can some please tell me how to unlock ecu with...

Can some please tell me how to unlock ecu with sd4 bd09 2016
I have changed the rear axle, and i need to change gear ratio,and it says that i need to open ecu
Its a w211 220cdi 2008
02-09-2017, 05:36 AM
Replies: 5
Views: 473
Posted By larsianer

Its so strange, cause it dont sag over night,...

Its so strange, cause it dont sag over night, (see picture)
I will check the. Distributor today, is it under the rear seat?
What can i check with star c4?
And are there any valves that could wear...
02-08-2017, 07:03 PM
Replies: 5
Views: 473
Posted By larsianer

Oki, i will get two, are there anything i should...

Oki, i will get two, are there anything i should check, can it be something else?
02-08-2017, 04:23 PM
Replies: 5
Views: 473
Posted By larsianer

Stop car to low message(need advice) got star scan

I still got my w211 220cdi 2008
And yesterday i lost all air in my rear shocks, i think i heard a hissing sound(air-blowing) from the rear left side, when it sunk down, after 10 mins, the car rised...
Forum: W211 AMG
02-03-2017, 07:54 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

Is there a standard code for reset the sbc...

Is there a standard code for reset the sbc brakes?, the c4 says it need a code for the reset
Forum: W211 AMG
01-04-2017, 06:25 PM
Replies: 1,333
Views: 735,811
Posted By larsianer

Can someone help me with a developer key?, i can...

Can someone help me with a developer key?, i can pay for it
Please

Regards from norway
01-02-2017, 06:36 PM
Replies: 1
Views: 443
Posted By larsianer

Star diagnose system wont start! Code(1.2)503.9912.

I cant get xentry to work, i get the fault code (1.2)503.9912.
Anybody know what i have done wrong, or what i should try its a chinese sds c4
12-27-2016, 05:40 PM
Replies: 1
Views: 853
Posted By larsianer

Fault code help

Still got the w211 2008 mod, with 460.000km.
Now the cel engine is on, and the car stops, alot..and hesitate

22e7-005 check system "high preassure controll" the rail preassure is to high, rail...
12-06-2016, 10:26 AM
Replies: 1
Views: 726
Posted By larsianer

Secret menu in engineer mode?

I have a ntg1, and i would like to get the vim"video in motion" to work, but i can find the codes,button sequense!

Do i need to down grade the software?
I can enter the engineer mode

I...
10-30-2016, 09:32 AM
Replies: 1
Views: 422
Posted By larsianer

I cured it, all my gearbox problems is gone now,...

I cured it, all my gearbox problems is gone now, everything works superb
I changed the lock up solenoid, and the condictorplate, and i mounted the sonax gear valves, with o rings, and the sonax...
10-05-2016, 04:57 PM
Replies: 0
Views: 400
Posted By larsianer

conductor plate nr?? w211

Hei again, i shall try changing the conductor plate in the transmission, but there are 6 different conductor plates in epc, what can i use??

My win is:WDB2112081B281033
hope this will solve my...
10-02-2016, 07:26 AM
Replies: 0
Views: 274
Posted By larsianer

Jerky shift, when heating is on

Still got the w211 220cdi 2008, with now 455,000km
When the heating is on, it shifts jerky, and i hear grinding sounds, and i have problems to downshift, it feels like it is in to high gear,but when...
09-01-2016, 04:08 PM
Replies: 0
Views: 385
Posted By larsianer

is this the lockup valve?

i had down the valve housing on my w211 220cdi with a 722.6 transmission
and the valve in the picture has marks on it,is it the lock up valve?
08-06-2016, 10:37 AM
Replies: 5
Views: 409
Posted By larsianer

I have changed the o2 sensor,but it still dont...

I have changed the o2 sensor,but it still dont oscilate,if i remove the plugg,it goeso over 4 volt,and when i have the plugg connected, is like the old one was 1.04 volt,what can be wrong, and what...
08-05-2016, 12:38 PM
Replies: 0
Views: 346
Posted By larsianer

Oxygen sensor problem II

I got a new o2 sensor,cause the old one had 1.04volt all e time in live scann it did not oscilate,now i have mounted the new o2 sensor, and its still 1.04volt on the live scan,what is next step,...
08-03-2016, 05:39 PM
Replies: 16
Views: 3,920
Posted By larsianer

Yea i meant it was warm,,,my ipad sucks Shall...

Yea i meant it was warm,,,my ipad sucks
Shall it be no airbubbles when i start the pump??

I think i will try with a new pump also, the car graveyard near me can sell me a cheap used on, for about...
08-03-2016, 03:53 PM
Replies: 16
Views: 3,920
Posted By larsianer

I did take out the fuel pump today, i was warm,...

I did take out the fuel pump today, i was warm, and the lid over the fuelmpump was also warm, that cant be right

What you think?, there was some few air bubbles when i drove the fuel pump
08-02-2016, 08:29 PM
Replies: 16
Views: 3,920
Posted By larsianer

The fuel pump reley,is it in the fuse box in the...

The fuel pump reley,is it in the fuse box in the engine room?
I will open the rear seat tomorrow and check it
08-02-2016, 08:17 PM
Replies: 16
Views: 3,920
Posted By larsianer

So you say that i should check the fuel pump...

So you say that i should check the fuel pump under the rear seat?, can i measure ohm on it

Or just clean it

I will do what you say cmriv, you have given me supreme help before

The strange...
08-02-2016, 07:12 PM
Replies: 16
Views: 3,920
Posted By larsianer

I have 371bar all the time,even if i give full...

I have 371bar all the time,even if i give full throttle,i use live scan from easydiag,i have the facelift, do you have prefacelift

What can be wrong, i have no cel,and no error codes??
Kajtek1 i...
08-01-2016, 09:10 PM
Replies: 16
Views: 3,920
Posted By larsianer

The specialist in my town,dont know anything, if...

The specialist in my town,dont know anything, if i say live scan to them,they dont know what it is,they did not know that the seat under the injectors could be cut,worked on to get a perfect...
08-01-2016, 08:36 PM
Replies: 16
Views: 3,920
Posted By larsianer

i changed the injectors cause one of them was out...

i changed the injectors cause one of them was out of spec,..
the whole story you say..heheh
ok, this is what i remember

i have changed the:

Gearbox
Converter
wheel bearings
all bushings in...
08-01-2016, 05:14 PM
Replies: 16
Views: 3,920
Posted By larsianer

Fuel rail pressure question

I have a w211. 220cdi 2008 with 450,000km.
Are the fuel rail pressure supposed to be 271bar?
When i turn of the engine, and turn the key back to on,(so the fuel pump is running,i guess)

The rail...
07-26-2016, 01:24 PM
Replies: 5
Views: 409
Posted By larsianer

Hehe,thanks for reply,where can the fault be,you...

Hehe,thanks for reply,where can the fault be,you have any idea??,its running rich??

Btw: you where close,some years ago, when i did not have the driving license, and my father was tired of the...
07-26-2016, 11:25 AM
Replies: 5
Views: 409
Posted By larsianer

Oxygen sensor (b1-s1) voltage value

My w211 is a little weird on low rpm,i have done a live scann of the oxygen sensor (b1-s1),and ita not oscilating,it is static 1.04 volt all the time, when i am driving its also on 1.04 volt

This...
05-04-2016, 08:24 PM
Replies: 4
Views: 470
Posted By larsianer

it does not vibrate,so you say that i should put...

it does not vibrate,so you say that i should put alot"like 10-20" of napkins,in the oil filler opening,and start the engine,and see if they fly away?

if they do,then i should try to rip...
05-04-2016, 08:17 PM
Replies: 4
Views: 470
Posted By larsianer

oki, i will do that tomorrow,and report...

oki, i will do that tomorrow,and report back.thanks again plutoe
05-04-2016, 03:58 PM
Replies: 4
Views: 470
Posted By larsianer

dancing oil cap 220cdi

I have a w211 220cdi 2008.
and i have a dancing oil cap,it have the same moves as this old engine in the video link

Mercedes W115 240D Diesel Oil Blow By - Dancing Cap Test - YouTube

is it...
04-27-2016, 07:06 AM
Replies: 1
Views: 268
Posted By larsianer

ac clutch removal tool,and part nr"help"

my ac clutch is bad, and i need to change it, but i cant find the pump or the belt wheel part nr in the epc,and i cant fint the spesial tool either,.
is there anybody here that can help me??

my...
04-12-2016, 01:34 PM
Replies: 3
Views: 385
Posted By larsianer

yea, i think i have been totaly thinking wrong, i...

yea, i think i have been totaly thinking wrong, i have changed the inntake manifoild, and the injectors,and all the sensors on engine.and all the gasket on the intercooler system.so i am thinking...
04-11-2016, 01:13 PM
Replies: 3
Views: 385
Posted By larsianer

can i clean the fuel distributor rail

i still have uneven idle,and i have changed the injectors,and i have tryed without the serpentine belt,and the uneven idle is still there.
when the car is warm, the idle is ok.

so i think that it...
04-02-2016, 07:36 AM
Replies: 12
Views: 665
Posted By larsianer

i have mounted new brushes,and voltage...

i have mounted new brushes,and voltage regulator,and its still i 11.7volt at the headlight, the strange thing is that when i turn the key to "on" position,and measure the volt output at the...
03-14-2016, 07:29 PM
Replies: 2
Views: 304
Posted By larsianer

i have epc i will do some more test..thanks for...

i have epc i will do some more test..thanks for reply
03-14-2016, 06:37 PM
Replies: 2
Views: 304
Posted By larsianer

do i need coding to change fusebox w211 220cdi

i think i have a problem with my fuse box,cause i have weak/dim headlights, and i only get 11.76volts on them,and if i measure the volt input to the fuse box,i got 14.2v-14.3v.and my fuse to the...
03-03-2016, 03:30 AM
Replies: 8
Views: 825
Posted By larsianer

The eratic idle is still there, now i will try to...

The eratic idle is still there, now i will try to change the injectors, and see if that will work
02-27-2016, 08:06 PM
Replies: 8
Views: 825
Posted By larsianer

Now i have changed the inlet manifoild,the old...

Now i have changed the inlet manifoild,the old manifoild was full of debris, and the swirl flaps,could not move,the swirl flaps vacuum pump was not working,it was leak.
Now the car is much...
02-23-2016, 03:50 PM
Replies: 8
Views: 825
Posted By larsianer

i have tryed to use the stethescope, and i really...

i have tryed to use the stethescope, and i really cant hear where the sound come from,i think i heard a sound under the harmonic balancer,at the oil pump chain..so do any of you know if i only need...
02-23-2016, 03:36 PM
Replies: 8
Views: 825
Posted By larsianer

i have a new intake manifold on the way,its here...

i have a new intake manifold on the way,its here on friday,i will mount it this weekend.can i change the oil chain tensioner if i remove the oil pan??
02-23-2016, 02:33 PM
Replies: 8
Views: 825
Posted By larsianer

now i have changed the harmonic balancer, and the...

now i have changed the harmonic balancer, and the sealing,and the sound is still there,but when i removed the crank sealing, i could move the oil pump chain little,shall the oil pump chain be...
02-14-2016, 04:44 AM
Replies: 8
Views: 825
Posted By larsianer

what is this sound"with video"

Can this be the oil pump chain,or the harmonic balancer??
i will change the harmonic ballancer in some days, i am just waiting for some tools.i have tryed to remove the belt,and the sound is still...
02-13-2016, 12:24 PM
Replies: 7
Views: 1,110
Posted By larsianer

No,how do i check the chain for strech?? what...

No,how do i check the chain for strech??
what do i need to remove??
02-11-2016, 12:37 PM
Replies: 7
Views: 1,110
Posted By larsianer

yepp thats the strange thing....and the idle...

yepp thats the strange thing....and the idle fluktuates also...but like i said, the sound is still there,when i try without the belt/serpentine
02-11-2016, 12:04 PM
Replies: 7
Views: 1,110
Posted By larsianer

thank you for reply,i have tryed without the...

thank you for reply,i have tryed without the belt, and the sound is still there,the strange thing,is that its more sound, if i turn on the heating inside the car, what is the belt running gear??
02-10-2016, 02:03 PM
Replies: 7
Views: 1,110
Posted By larsianer

i have now changed the chain tensioner,and the...

i have now changed the chain tensioner,and the sound is still there, i also have tryed without the serpentine belt, and the sound still is there, am waiting for the harmonic balancer belt drive...
02-04-2016, 06:44 PM
Replies: 4
Views: 968
Posted By larsianer

i only have the icarsoft, that got these codes,...

i only have the icarsoft, that got these codes, there are a airbag unit/ecu behind the gearshifter, in the center middle console,

are there two airbag modulboxes/ecu-units??
what can go wrong of...
02-04-2016, 04:26 PM
Replies: 4
Views: 968
Posted By larsianer

The box that is under the gearshifter??

The box that is under the gearshifter??
02-04-2016, 01:15 AM
Replies: 10
Views: 1,560
Posted By larsianer

i was the brake vacuum pump that was leak,i...

i was the brake vacuum pump that was leak,i changed it some weeks ago, and now its clean,and no more leaks i the front of the engine, the pump was also a little damaged where it is mounted on the...
02-03-2016, 06:35 AM
Replies: 0
Views: 439
Posted By larsianer

Change over valve problems?

I dont get warm air in my w211,sometimes i get a little warm,but it dont last,i have tryed to clean the changeover/heater valve,but it dont help so much.i have taken a heat measure gun,and i filmed...
02-02-2016, 05:27 PM
Replies: 4
Views: 968
Posted By larsianer

error codes on vaneo, what does p010000 means??

Hey

Got the srs light on, and i got the error codes p01001a and p010000
on a mercedes vaneo 1.6 2003 mod, with win nr:WDB4147001N216998

Please help
Lars
Forum: V-Class
01-30-2016, 06:45 PM
Replies: 0
Views: 618
Posted By larsianer

vaneo 414.700 srs light resistors

Got a srs light,i have scanned it and its the child seat recognition sensor
code B48
so i am thinking to bypass it with a resistor, but how much ohm,should it have??

can i ohm the passanger side...
01-25-2016, 07:45 PM
Replies: 6
Views: 802
Posted By larsianer

I know about that site,but there is no 220cdi...

I know about that site,but there is no 220cdi engines there....
01-25-2016, 07:09 PM
Replies: 1
Views: 434
Posted By larsianer

WIS help,for the chain tensioner replacement

can somebody with the WIS please tell me how to remove the chain tensioner,and innstall it, i have read that i need to have it in the tdc, and then remove it, and innstall it
my win...
01-25-2016, 07:06 PM
Replies: 6
Views: 802
Posted By larsianer

can somebody with WIS please tell me the way to...

can somebody with WIS please tell me the way to do it, i read in the haynes, the book says that i need to have the engine in tdc, and then remove the tensioner...is that all???
WDB2112081B281033
01-25-2016, 05:10 PM
Replies: 6
Views: 802
Posted By larsianer

change the timing chain tensior

when i shall change the tensior, is it just to unmount the old one,and innstall a new one??
or do i need to have the engine in some kind of position??

cause i think its broken, see video
Chain...
01-25-2016, 02:58 PM
Replies: 7
Views: 1,110
Posted By larsianer

timing chain tensioner sound"with video"

could this be the chain tensioner,that is making this sound??
i have tryed without the serpentine belt, and the sound is still there
its a w211 220cdi 2008,with 430,000km

Chain tensioner...
01-25-2016, 01:34 PM
Replies: 13
Views: 1,437
Posted By larsianer

i have now overhauled the alternator,and changed...

i have now overhauled the alternator,and changed all idler wheels, and i tryed to remove the serpentine belt, and the sound is still there, and when its cold its even more sound,could it be the chain...
01-03-2016, 04:36 AM
Replies: 1
Views: 330
Posted By larsianer

strange sound from ac/or power stearing pump when cold,with video

what can this be,it goes away when the car warms up
the sound come in about 20sec, after it revs down,cause of cold start
Aircondition pump,or servo pump?? - YouTube
it comes from the right side...
12-25-2015, 05:44 PM
Replies: 0
Views: 354
Posted By larsianer

FUEL DISTRIBUTOR TEMPERAURE DIFFERENSE

i have about 10degres celsius differense in the fuel distrubator,the 2 middle are about 10 degres lower than the 2 other!!
so the temp was in cylinder nr:1 was about 40 and nr2:was about 30,and nr...
12-01-2015, 03:41 AM
Replies: 13
Views: 1,437
Posted By larsianer

i have ordered the free wheel on the alternator,...

i have ordered the free wheel on the alternator, and the voltage regulator to the alternator,i will give a report when i have mounted these parts, i think it will take a week before the parts arrive
11-30-2015, 01:46 AM
Replies: 1
Views: 422
Posted By larsianer

eratic idle w211 220cdi facelift"with video"

what can be wrong here?,it is idling like this when cold and the gear is in N or P
Funny idle w211 - YouTube
11-29-2015, 09:01 AM
Replies: 13
Views: 1,437
Posted By larsianer

i have the correct nr on the ribs, how do i check...

i have the correct nr on the ribs, how do i check the Alternator freewheel???
11-29-2015, 08:19 AM
Replies: 13
Views: 1,437
Posted By larsianer

i have changed all pulleys,and the belt

i have changed all pulleys,and the belt
11-29-2015, 06:59 AM
Replies: 13
Views: 1,437
Posted By larsianer

flapping drive drive belt

i got a w211 220cdi, and the drive belt is flabbing,the tensioner is moving up and down all the time and its a new tensioner, what can be wrong here???

Lars
11-27-2015, 01:01 PM
Replies: 0
Views: 772
Posted By larsianer

error code p0731

i got a code today,what is wrong now with my car,the code says
0731 The gear is implausible or the transmission is slipping (1.gear)

Hope someone can help me here a little

Lars
11-23-2015, 04:25 PM
Replies: 6
Views: 5,809
Posted By larsianer

Thank you so much, it looks like alot of work, to...

Thank you so much, it looks like alot of work, to change it, but i will do it, i guess it is placed under the intake manifoild,is that right?
have any changed it, and knows how long time it takes?
...
11-23-2015, 01:22 PM
Replies: 6
Views: 5,809
Posted By larsianer

so then i dont have the one i linked?

so then i dont have the one i linked?
11-23-2015, 01:14 PM
Replies: 3
Views: 5,937
Posted By larsianer

Hey My VIN is:WDB2112081B281033

Hey

My VIN is:WDB2112081B281033
11-23-2015, 08:21 AM
Replies: 3
Views: 5,937
Posted By larsianer

The screw on quantity control valve

what is the screw on the quantity control valve for,adjusting idle???
the quantity control valve is the part called y94 on the picture,its located on the high preasure pump

is it possible to take...
11-23-2015, 07:25 AM
Replies: 6
Views: 5,809
Posted By larsianer

where is the air temperature sensor w211 220cdi facelift

do i have a air temperature sensor?, if yes, where is it located?
the car is a w211 220 cdi 2008
it is the same as this
...
11-14-2015, 03:21 PM
Replies: 12
Views: 665
Posted By larsianer

i will try to go check the jumping peg for...

i will try to go check the jumping peg for voltage, how much should it be there??
i dont have any history on the alternator,but its covered with mud and oil, cause the previous owner did not have...
11-14-2015, 02:36 PM
Replies: 12
Views: 665
Posted By larsianer

i have measured the volt output at the...

i have measured the volt output at the headlights, they are 11.7 volt,when the battery was 12.4v-12.5v.i have also checked the front&rear sam,both looked good.i have checked and cleaned the ground...
11-06-2015, 01:23 PM
Replies: 12
Views: 665
Posted By larsianer

Thank you, do you know of any places in the...

Thank you, do you know of any places in the sam,where they have had problems?

Lars
11-06-2015, 01:03 PM
Replies: 12
Views: 665
Posted By larsianer

thank you for reply, i dont have aux...

thank you for reply, i dont have aux battery,cause i dont have sbc brakes,but where is the front and rear sam??
11-06-2015, 12:40 PM
Replies: 12
Views: 665
Posted By larsianer

lights dim,when esp engages

when i was driving today, i noticed that my head lights got dim,when the esp engaged, i also have a kind of weak light in the speedometer,and the headlights is also weak.
i have mounted a new ground...
10-25-2015, 10:47 PM
Replies: 2
Views: 1,675
Posted By larsianer

Do i have anti theft alarm? w211

i never have heard any alarm,my vin nr is:WDB2112081B281033
do i have an alarm?,cause i thought all w211 had alarm
if i have,where is the alarm module?

Lars The Cod Man
10-23-2015, 05:59 PM
Replies: 0
Views: 278
Posted By larsianer

Can i use these injectors?

one of my injectors is bad, i am need to change it,can i use these one?
http://www.ebay.com/itm/Einspritzduse-Injektor-A6460700987-DELPHI-Mercedes-W211-W204-C-E-200-220-CDI-/121666079702
my vin...
10-21-2015, 04:24 PM
Replies: 2
Views: 468
Posted By larsianer

thank you!!

thank you!!
10-21-2015, 03:19 PM
Replies: 2
Views: 468
Posted By larsianer

injector code/uneven measurement

still got the w211 220cdi 2008, and when i use my icarsoft diagnose machine,and run the program injector test:smoth engine it says that it is different preassure on them injectors, and it sometime...
10-13-2015, 01:46 PM
Replies: 2
Views: 1,218
Posted By larsianer

thank you,so i need to buy 2 new rear axles?

thank you,so i need to buy 2 new rear axles?
10-13-2015, 11:42 AM
Replies: 2
Views: 1,218
Posted By larsianer

sideways play in rear axle/cv-joint

i can move my rear drive axle about 2cm out and inn..is that right??

see video
Cv-joint play?? - YouTube
10-13-2015, 11:40 AM
Replies: 5
Views: 4,683
Posted By larsianer

there is nothing fastened to the sway bar, could...

there is nothing fastened to the sway bar, could it have fallen of,there is no mounting parts there either.and i cant fint any electrical plugs to it either
is it possible that i dont have that...
10-08-2015, 04:42 PM
Replies: 0
Views: 4,446
Posted By larsianer

fault code 9024 and 9027

i have fixed my front parktronic, but i got 2 error codes, and the rear parktronic dont work, the code i get is,9024 and 9027, does anybody know what they mean,or are there any errror code scheme out...
10-08-2015, 03:58 PM
Replies: 5
Views: 4,683
Posted By larsianer

rear axle level sensor,where is it??

got a strange code.rear axle level sensor,i have air springs, and i dont know where that sensor is,someone here that can tell me, or give me a picture??
10-08-2015, 03:55 PM
Replies: 5
Views: 4,683
Posted By larsianer

10-07-2015, 05:39 PM
Replies: 1
Views: 667
Posted By larsianer

how does a bad cv-joint sound like?

when i drive uphill,i got a grinding sound from the rear of the car,its worse when cornering, and seems to allmost go away when the car is warm.but its still there

when dont press the throttle the...
09-25-2015, 03:33 PM
Replies: 3
Views: 2,232
Posted By larsianer

Diagnostic reader question??

does this diagnostic reader read the parktronic system on my w211 220cdi 2008
or do i need another one,i dont have the money to the star...
09-22-2015, 03:41 PM
Replies: 10
Views: 1,560
Posted By larsianer

Thank you again, then i will not nag at you at...

Thank you again, then i will not nag at you at the forum,when i start to change it
hehe
Lars
09-22-2015, 02:30 PM
Replies: 10
Views: 1,560
Posted By larsianer

Thank you, i will check it and if its bad, i will...

Thank you, i will check it and if its bad, i will change it, do i need to remove the camshaft,for removing the old ring, or can i drag the seal out?

Thanks again

Lars
09-22-2015, 02:18 PM
Replies: 2
Views: 323
Posted By larsianer

Thanks for answer, i will check it tomorrow...

Thanks for answer, i will check it tomorrow again, by installing all sensors corectly/symmetrical, do you mean that they all shall point the same way???
and i will not sell the car, i am seeing the...
09-22-2015, 12:10 PM
Replies: 2
Views: 323
Posted By larsianer

Grund to park sensors w211 220cdi facelift

I have changed all my park sensors,and there are still one not working,so i need to know where the earth/ground is to them parking sensors,anybody know?
09-21-2015, 10:27 AM
Replies: 10
Views: 1,560
Posted By larsianer

thank you,for reply, i have cleaned them parts,...

thank you,for reply, i have cleaned them parts, but i dont know where the oil is comming from, where is the turbo inlet seal?, how can i take a picture so you can see better??

Lars
09-19-2015, 01:28 PM
Replies: 10
Views: 1,560
Posted By larsianer

oil leak,need som help here again

i have some oil leaking in the front of the engine, do anybody know what gasket i need,or do anybody have the gasket scheme, or engine parts scheme,drawings of the engine, the car is still a w211 220...
09-13-2015, 11:49 AM
Replies: 4
Views: 1,013
Posted By larsianer

Do you have air springs on your car,i have it.!

Do you have air springs on your car,i have it.!
09-12-2015, 05:34 PM
Replies: 4
Views: 1,013
Posted By larsianer

Need some help to find part nr on this bushing

my bushing in the rear controll arm is really bad,do i need to buy a new complete controll arm,or is it possible to find a bushing??
its a w211 220cdi 2008
WDB2112081B281033
09-11-2015, 04:33 PM
Replies: 2
Views: 898
Posted By larsianer

no thats the bushing that is stuck in the rear...

no thats the bushing that is stuck in the rear subframe, that the a-arms i supposed to bolt on with.

the a-arm bushings is easy, i have swapped all of them,but this bushing was not straight,and i...
09-11-2015, 02:28 PM
Replies: 2
Views: 898
Posted By larsianer

problems pressing subframe bushings

how do i press out those bushings,to the arm,that holds the shocks?
are there any press kit that i can purchase??
and how do i let out the air from the shocks?
its bushing nr 20 i have problems to...
09-08-2015, 06:32 PM
Replies: 3
Views: 362
Posted By larsianer

Thank you, i dont have sbc brakes, so i dont need...

Thank you, i dont have sbc brakes, so i dont need to deactivate them right??
i thought i saw one of them arms, that would me hard to remove, but when you say it will work,i am sure that it will work...
09-08-2015, 12:03 PM
Replies: 3
Views: 362
Posted By larsianer

do i need to take down sub frame for changing all rear arms

i need to change some of the rear arms, and it looks like i need to take down the rear subfram for changing one of them,is that right??
its a w211 220cdi 2008

Lars
09-06-2015, 02:28 PM
Replies: 9
Views: 5,144
Posted By larsianer

thanks for answer, i will try to build me an...

thanks for answer, i will try to build me an turbo preassure tester, and check the hoses, but shall i only plugg the compressor in the turbo inlet??
and what is the max preassure i shall use?
09-06-2015, 12:59 PM
Replies: 9
Views: 5,144
Posted By larsianer

can the intake manifold swirl flaps be under the...

can the intake manifold swirl flaps be under the lid here??
09-06-2015, 12:51 PM
Replies: 3
Views: 551
Posted By larsianer

the plug dont fit nowhere in the boxes and it...

the plug dont fit nowhere in the boxes
and it looks a little different in your picture
09-06-2015, 10:28 AM
Replies: 3
Views: 551
Posted By larsianer

where is this plugg supposed to be?

i was doing some work on the floor at the passanger side, and i found this lose plug, where is it supposed to be connected?
09-06-2015, 10:19 AM
Replies: 9
Views: 5,144
Posted By larsianer

do all 220cdi engines have the intake manifold...

do all 220cdi engines have the intake manifold swirl flaps?
i have the 2008 model, and i cant find them, are them under the manifoild??

what hoses can crack??

sorry for naging, but i really...
09-05-2015, 02:49 PM
Replies: 9
Views: 5,144
Posted By larsianer

thank you, i will go check if there is some oil...

thank you, i will go check if there is some oil in it, what can make the car hessitate, i have taken the reset, with press the throttle, and hold...

do i need a software change?
09-05-2015, 12:29 PM
Replies: 9
Views: 5,144
Posted By larsianer

I have checked the rod,that controlls the...

I have checked the rod,that controlls the vains,it moves freely,i removed the clips,and tryed,but are there any way to check the solenoid,that moves the arm the the vaines?

And where is the tcm...
09-04-2015, 08:15 PM
Replies: 9
Views: 5,144
Posted By larsianer

Turbo problems w211 220cdi

At low rpm, the car is really slow to aclerate,when i press the throttle,and drive uphill, it can take 2-3sec before the car start to aclerate,there is also alot of turbo whistle when i drive.
At...
08-26-2015, 04:35 PM
Replies: 3
Views: 437
Posted By larsianer

WDB2112081B281033 is that the number i need?? ...

WDB2112081B281033
is that the number i need??

Lars
08-26-2015, 01:19 PM
Replies: 3
Views: 544
Posted By larsianer

Hehe,cod..everybody have it in my town,its worth...

Hehe,cod..everybody have it in my town,its worth nothing here,but thanks for reply,but what is the meaning of the letters fa??
08-25-2015, 04:23 PM
Replies: 3
Views: 544
Posted By larsianer

Power steering pump problems

I was changing my idleer pulley,and i saw that it was some play in the power stearing wheel,on the pump,are there any places i can purchase new bearings to it,and seals?
08-25-2015, 03:00 PM
Replies: 5
Views: 581
Posted By larsianer

I had the same problem,after brake job,you need...

I had the same problem,after brake job,you need to use a vacuum bleeder,or you will not get the air out from the brake system,you cant get it out of park,cause the brake dont work,i had also that...
08-24-2015, 01:17 PM
Replies: 3
Views: 437
Posted By larsianer

hight adjustment on headlights dont work!!

i have a w211 220cdi 2008with non xenon lights, and the height adjustment dont work, is i a vakuum system, cause i cant see any electrical engines.do anybody have a drawing og the vacuum system,or an...
08-20-2015, 01:27 PM
Replies: 4
Views: 362
Posted By larsianer

thanks for reply, everything worked, now i have a...

thanks for reply, everything worked, now i have a new torq converter, and new gearbox.thanks for all help,i have got from this forum.

My net project will be to overhaul the rear differensial,i...
08-19-2015, 10:38 PM
Replies: 4
Views: 362
Posted By larsianer

yes it is thight..what you think??

yes it is thight..what you think??
08-19-2015, 02:56 PM
Replies: 4
Views: 362
Posted By larsianer

Is my gearbox plug right mounted"with picture"

I have just mounted my gearbox again,but the plug doesnt look to be totaly inside, what you say?
08-15-2015, 06:46 PM
Replies: 1
Views: 312
Posted By larsianer

what Nm is it,on this screw??

its the oil in and out, how much newton shall i use??
number 149
08-11-2015, 05:54 PM
Replies: 2
Views: 351
Posted By larsianer

I forgot to measure how much oil i drained from the gearbox,got a new now

I got a overhauled transmission,and a new converter,but i did forget to measure how much oil i did take out of it,so how do i do it, i allso got a new converter,i have the service transmission...
08-10-2015, 03:16 PM
Replies: 1
Views: 1,982
Posted By larsianer

Splash guard/skid plate

i need to purchase the splash guard/skid plate, that is under the engine, and under the gearbox, and the one that is in the front, under the bumper, but are them all the same,are there any online...
08-09-2015, 09:00 AM
Replies: 2
Views: 490
Posted By larsianer

so i quess i can use all 7226400 transmission,is...

so i quess i can use all 7226400 transmission,is that right??
08-09-2015, 07:21 AM
Replies: 2
Views: 490
Posted By larsianer

gearbox numbers??

i am thinking to purchase a used gearbox,or i will overhaul my old one,my gearbox numbers are r2202711901,do i need to purchase a gearbox with the same numbers, or can i use some other, what is the...
08-07-2015, 04:35 PM
Replies: 2
Views: 378
Posted By larsianer

thanks, i am used to stand out doors, we have a...

thanks, i am used to stand out doors, we have a garage, but my grandfather is using it now, and i cant throw the old man out,what shall i check when i mount it again,i will be glad for any advise
08-07-2015, 03:20 PM
Replies: 2
Views: 378
Posted By larsianer

Gearbox out of the car now!!

i have got the gearbox out, and i will deliver the box to a mechanic that will overhaul it!!,what shall i do when i mount it again.
07-31-2015, 03:05 PM
Replies: 6
Views: 709
Posted By larsianer

Thanks for reply, do you know where i can find...

Thanks for reply, do you know where i can find step by step instruction?
Or is it possible that i can find a little used gearbox on e-bay,i have searched, but i did not find with all simular gearbox...
07-30-2015, 06:30 PM
Replies: 6
Views: 709
Posted By larsianer

Thanks for tip cmriv, i have now ordered a trans...

Thanks for tip cmriv, i have now ordered a trans dipstick, so i can measure oil lvl
Something more??,is it hard to change the clutch disc inside the gearbox?

Thanks again for replt, it really...
07-30-2015, 10:22 AM
Replies: 6
Views: 709
Posted By larsianer

Thanks for answer,but my transmission is...

Thanks for answer,but my transmission is called:722640 07 228591 ,so then my valve body is oki?.but do you know if i need to program the new conductor plate with new solenoids,with a staar pc?
I...
07-29-2015, 02:51 PM
Replies: 6
Views: 709
Posted By larsianer

Changing gearbox and converter in w211 220cdi 2008

I am in the middle of the uinnstalling of my gearbox, and i shall change the converter,and the electrical plate,and all the solenoids,and overhaul the valve body in the gearbox,do i need to get the...
07-23-2015, 06:06 PM
Replies: 1
Views: 318
Posted By larsianer

what kind of light bulps do i use, i have xenon it now, innstalled by last owner

i want to change back to orginal light bulps, cause one of the power-supply is broken, what bulps do my car have orginal??
its a w211 220 cdi 2008

here is a picture of the uorginal ballast/power...
07-23-2015, 08:41 AM
Replies: 4
Views: 875
Posted By larsianer

Thanks for reply, do you have a link to the alu...

Thanks for reply, do you have a link to the alu wheels??
07-21-2015, 02:08 PM
Replies: 4
Views: 875
Posted By larsianer

Drive Belt Idler Pulley bearings

is it possible to only change the ball bearings on the Drive Belt Idler Pulley,those with the red arrow in the picture??
07-21-2015, 02:05 PM
Replies: 3
Views: 610
Posted By larsianer

i will check it today, thanks for reply cmriv

i will check it today, thanks for reply cmriv
07-20-2015, 08:11 PM
Replies: 3
Views: 610
Posted By larsianer

Glycol in transmission, what year??

i got a w211 220cdi 2008 model, and my car use a litte glycol, and my gearbox is weird, do i have a leak??
what was the bad radiators called??
07-19-2015, 03:04 PM
Replies: 1
Views: 1,267
Posted By larsianer

Error code P0219 engine overspeed condition

i scanned my car with my obd2,and i got the code P0219 engine overspeed condition
is there something that can be broken??,or starts to wear out.what should i check?
i did clear the code!

Lars
07-01-2015, 01:41 PM
Replies: 9
Views: 1,608
Posted By larsianer

the last owner had the codes read, and there...

the last owner had the codes read, and there where no codes....so you say that i shall swap the channel locks??
07-01-2015, 12:30 PM
Replies: 1
Views: 488
Posted By larsianer

I made a little DIY just for fun!!

what you think??

How to change diesel filter mercedes w211 DIY - YouTube
07-01-2015, 12:29 PM
Replies: 9
Views: 1,608
Posted By larsianer

i have changed to diesel filter, the car got...

i have changed to diesel filter, the car got better engine sound, but the engine is warm, so i have not tested it cold yet,i will report tomorrow, but i made a little funny DIY about the diesel...
06-30-2015, 03:59 PM
Replies: 9
Views: 1,608
Posted By larsianer

it gears a little hard when cold,so i should...

it gears a little hard when cold,so i should change the lockup solenoid, and what 2 valves in the valve body shall i change?this is a 220cdi.i dont know when the fuel filter has been changed, so i...
06-30-2015, 11:03 AM
Replies: 9
Views: 1,608
Posted By larsianer

i am driving in 40km/t,with the cruise controll,...

i am driving in 40km/t,with the cruise controll, and the rpm jumps when the car is cold..
06-30-2015, 03:50 AM
Replies: 9
Views: 1,608
Posted By larsianer

is this a lock up solenoid problem

what is causing this??.the problem is one when the car is cold..
Lock-up solenoid problems! - YouTube
06-11-2015, 06:19 PM
Replies: 14
Views: 563
Posted By larsianer

Thanks for answer, i dont have the service...

Thanks for answer, i dont have the service history on the car, but it has 417,000km on it, i know its much..heheh.i will try to change that bushing,with a arrow.hope they sell it in a lose part.

i...
06-11-2015, 01:26 PM
Replies: 14
Views: 563
Posted By larsianer

i will do it later, thanks for reply, by saying...

i will do it later, thanks for reply, by saying sip that bolt out of that arm, you are meaning the arm, when the arrow on the picture??

thanks
Lars
06-11-2015, 11:16 AM
Replies: 14
Views: 563
Posted By larsianer

i have jacked up the car, and i took a picture of...

i have jacked up the car, and i took a picture of the subfram bushings
what you think??

and i also found a crack in the rear arm bushing, what you think about that??
06-11-2015, 10:36 AM
Replies: 14
Views: 563
Posted By larsianer

no its not in dyno mode, i will go jack the car...

no its not in dyno mode, i will go jack the car up now,for to take pictures of the subframe bushings

thanks for reply cmriv

Lars
06-11-2015, 07:45 AM
Replies: 14
Views: 563
Posted By larsianer

Thanks for reply, i will get the car scanned, but...

Thanks for reply, i will get the car scanned, but i will upload a picture of the cracks in the subframe bushing first.i can be them!!

About the money on the oem parts, i have a dealer i my town...
06-10-2015, 05:12 PM
Replies: 14
Views: 563
Posted By larsianer

Thanks for reply, i have tryed different wheel...

Thanks for reply, i have tryed different wheel lugs, and the vibration/knock/grinding noise is still there, i have also tryed different wheels, and the problem is still there.i have mount new brake...
06-10-2015, 07:50 AM
Replies: 14
Views: 563
Posted By larsianer

esp problems??

what can go wrong with the esp, i got a w211 220cdi, 2008
and its something making grinding noise in the rear of the car when its cold, and the car vibrates a little also.but it gets better when...
06-06-2015, 11:03 AM
Replies: 8
Views: 1,345
Posted By larsianer

its a 2008 w211 220cdi Thanks for answer, i...

its a 2008 w211 220cdi

Thanks for answer, i guess i have the late modell??
06-06-2015, 09:58 AM
Replies: 8
Views: 1,345
Posted By larsianer

thanks for answer, but i really dont have the...

thanks for answer, but i really dont have the money, so i need to gamble, the car have been diagnosed, but they did not find anything.

the car works perfect when its warm,its just a little slow on...
06-05-2015, 10:59 AM
Replies: 8
Views: 1,345
Posted By larsianer

I dont have the money, but a friend have a spare...

I dont have the money, but a friend have a spare gearbox..he said i can purchase them soilenoids cheap, so thats what i am thinking.

should i just change all the solenoids??
06-05-2015, 07:43 AM
Replies: 8
Views: 1,345
Posted By larsianer

i have read alot of folks with simular problems,...

i have read alot of folks with simular problems, and the last owner said that the workshop said that the solenoid was a problem.

i just need to try find the error,should i change more soilenoids...
06-05-2015, 07:12 AM
Replies: 8
Views: 1,345
Posted By larsianer

what of these solenoids are the lock up solenoid?

I will try to change my lock up solenoid, cause my car is weird when its cold, its judder,like i am giving a little throttle,off and on..are there some other solenoids i should change while i have my...
06-01-2015, 04:04 PM
Replies: 4
Views: 560
Posted By larsianer

Thank you, i will take apart the air filter box...

Thank you, i will take apart the air filter box tomorrow.and then i hope i can see the source

Lars
06-01-2015, 03:45 PM
Replies: 4
Views: 560
Posted By larsianer

Thanks for reply, i will check the valve cover...

Thanks for reply, i will check the valve cover gasket tomorrow.is it hard to change it??,do i need to remove the diesel injectors??

Thanks

LArs
06-01-2015, 03:27 PM
Replies: 4
Views: 560
Posted By larsianer

smoke from right side of engine.and oil smell

when i did press the engine uphill today, i noticed heavy oil smell inside the car,and it came smoke from the upper exhaust part/particel filter/catalyst"dont know the english word for it".the air...
05-29-2015, 02:30 AM
Replies: 2
Views: 400
Posted By larsianer

i have bought original bushings, they are 4mm to...

i have bought original bushings, they are 4mm to big, so i shall try use hose clamps.
05-28-2015, 11:48 AM
Replies: 2
Views: 400
Posted By larsianer

Problems pressing bushings"they have gap"

I have done some work today, and i cant get the bushings in place,cause they gap is to big, how do i press this bushing,or make the gap shrink


Lars
05-20-2015, 10:53 AM
Replies: 4
Views: 557
Posted By larsianer

no i just have lifted it from the ground with all...

no i just have lifted it from the ground with all 4 wheels.i have never heard about the dyno mode.
i also feel something knocking in the thrust arms,when the rear wheel jumps..
i have ordered some...
05-19-2015, 02:26 PM
Replies: 4
Views: 557
Posted By larsianer

i have now changed the brake disc, and brake...

i have now changed the brake disc, and brake pads, and parking brakes, and it still wobbles, can it be a bad abs sensor?, cause it seem like it is brakeing, or something like that.or can it be a bad...
05-15-2015, 03:54 PM
Replies: 4
Views: 557
Posted By larsianer

found out why the car vibrates"with video"

what is wrong here, is it a bushing??
YouTube
05-15-2015, 11:23 AM
Replies: 0
Views: 414
Posted By larsianer

problems bleeding the front brakes"problem solved"

i have a 220cdi 2008, and i have changed the brake pads, and i cant get the calipter pistons to work, i have tryed to bleed the brakes, but i can get preassure,i also changed the brake hose to the...
05-13-2015, 03:51 PM
Replies: 6
Views: 291
Posted By larsianer

Thank you, do i need to get new software when i...

Thank you, do i need to get new software when i change my shifter?,do they sell only the solenoid??

Thanks again

Lars
05-13-2015, 02:45 PM
Replies: 6
Views: 291
Posted By larsianer

The preavious owner had it diagnosed, and it was...

The preavious owner had it diagnosed, and it was nothing wrong,so i am thinking that i must be the soilenoid in the gear shifter assembly,cause i dont hear it engage,i am so sorry for all my naging,...
05-13-2015, 02:37 PM
Replies: 6
Views: 291
Posted By larsianer

Yepp, thank you for answer cmriv, i unhooked the...

Yepp, thank you for answer cmriv, i unhooked the battery, and after 1hour i mounted it again, and than it start, but i think i have a fault with the solenoid that free the park, cause i cant get it...
05-13-2015, 12:39 PM
Replies: 6
Views: 291
Posted By larsianer

w211 wont start after gear level change"HELP"

I had my gear level changer in small parts, cause i was checking it, cause i could not get my car ouf of park, and when i innstalled it again, the car wont start..wtf have i done wrong here????can it...
05-12-2015, 08:46 PM
Replies: 2
Views: 334
Posted By larsianer

thank you, but why are the gearbox in P,it will...

thank you, but why are the gearbox in P,it will come out of P,when i use the emergency thing.but when i place it in p again, it get suck, i have no error codes??
I see on the scheme, do i also need...
05-12-2015, 06:00 PM
Replies: 2
Views: 334
Posted By larsianer

Stuck in park 220 cdi 2008, do i have sbc?

i had a damage in my brake hose,so all my brake fluid ran out,and now i cant get the car out of park, i have filled new brake fluid,but the brake pedal is dead, do i have sbc?,i mean that i have read...
05-10-2015, 02:34 PM
Replies: 9
Views: 618
Posted By larsianer

This is how it looked like, it has some cracks,is...

This is how it looked like, it has some cracks,is it a liquid bushing??
i have pressed out all the ball links and other bushing,with pressing parts that i made in my lathe,if somebody want pictures...
05-08-2015, 04:08 PM
Replies: 9
Views: 618
Posted By larsianer

i have removed them now,the bushings have small...

i have removed them now,the bushings have small cracks in them,i need to change the ball joints also.
i have a regulary press, and i lathe, so i will tru to make my own pressing tools.is it hard to...
05-08-2015, 11:13 AM
Replies: 9
Views: 618
Posted By larsianer

i will remove the bushing arm now, but do i need...

i will remove the bushing arm now, but do i need any special tools for to remove the bushing??
05-08-2015, 10:24 AM
Replies: 9
Views: 618
Posted By larsianer

Thanks for reply, but how do i test what you say...

Thanks for reply, but how do i test what you say will the frontend hold an alignmen??
05-08-2015, 09:36 AM
Replies: 9
Views: 618
Posted By larsianer

are my bushings bad"with video"

are these bushings shoot???.can it be that causes that i feel somethings move under the car??

Bad bushing? - YouTube

i have changed the engine mounts, and the driveshaft center support

Lars
04-30-2015, 10:29 AM
Replies: 12
Views: 672
Posted By larsianer

But the question is, how do i allign this part?,...

But the question is, how do i allign this part?, cause the two holes are long and square,and can be mounted wrong if i dont get it straight/as it was??
04-30-2015, 10:20 AM
Replies: 12
Views: 672
Posted By larsianer

now i have taken the driveshaft of the car, and i...

now i have taken the driveshaft of the car, and i have marked it everywhere..hehe..
The new center bearing will be here in the end of next week,i live in Northern Norway, so everything goes very slow
Showing results 1 to 200 of 216
 


 
Forum Jump

Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.