MBWorld.org Forums - Search Results

Go Back  MBWorld.org Forums > Search Forums
Reload this Page >

Search Results

Notices
 
Search: Posts Made By: MBNRG
Showing results 1 to 200 of 403
Search took 0.10 seconds.
05-26-2019, 04:14 AM
Replies: 22
Views: 10,263
Posted By MBNRG

This is not an interpretation. This is an...

This is not an interpretation.
This is an observation by a trusted tech with experience: reference posts #16 & #19 of https://mbworld.org/forums/c63-amg-w204/737518-p30-p31-clarification.html
05-22-2019, 11:54 AM
Replies: 57
Views: 5,579
Posted By MBNRG

Still waiting for word as well. Need to have them...

Still waiting for word as well. Need to have them in hand ASAP to not miss an Installation Deadline.

Kevin, please advise
05-11-2019, 03:29 AM
Replies: 32
Views: 5,540
Posted By MBNRG

For those with this issue and are looking for...

For those with this issue and are looking for just the plates, instead of replacing entire Cam Adjuster:

There's a dude in S. Korea who makes them: eBay Seller ID: beetls
...
05-05-2019, 09:00 PM
Replies: 57
Views: 5,579
Posted By MBNRG

Hi Kevin, any updates on those subframe bushings...

Hi Kevin, any updates on those subframe bushings please?
05-05-2019, 08:12 PM
Replies: 20
Views: 783
Posted By MBNRG

Thumbs up BUMP, and big ups to Matt - MASTER carbon fiber...

BUMP, and big ups to Matt - MASTER carbon fiber craftsman :y

I cannot recommend Matt's work enough - his pieces are of superlative quality & value. In fact, the weave and application of UV clear...
05-02-2019, 01:48 AM
Replies: 1
Views: 250
Posted By MBNRG

myself, i like and use Carly on Android - it's...

myself, i like and use Carly on Android - it's able to see many if not ALL the ECU modules, and can erase/reset Airbag Lights after i mess with the seats, etc.
these features are typically seen in...
05-02-2019, 01:39 AM
Replies: 19
Views: 1,484
Posted By MBNRG

that green is SEXXXY, especially with the yellow...

that green is SEXXXY, especially with the yellow accents :y

Enjoy in good health!
04-25-2019, 11:29 PM
Replies: 57
Views: 5,579
Posted By MBNRG

Yeap, same concern I had when I saw them on eBay

Yeap, same concern I had when I saw them on eBay
04-24-2019, 06:01 PM
Replies: 37
Views: 8,669
Posted By MBNRG

Correct, BLKROKT's O2 Emulators are for the...

Correct, BLKROKT's O2 Emulators are for the Secondary (Downstream) O2 Sensors for those running aftermarket Long Tube Headers + Tune.
This Downstream O2 Sensor is immediately after the Stock...
04-24-2019, 05:29 PM
Replies: 6
Views: 393
Posted By MBNRG

You are correct, the Upstream (Primary) O2s are...

You are correct, the Upstream (Primary) O2s are Wideband, and will have more wires, hence the plug is 6 prong male (i believe).
The Downstream (Secondary) O2s are simply oxygen sensors (without...
04-17-2019, 10:02 PM
Replies: 14
Views: 560
Posted By MBNRG

I would think one with ALI Certification...

I would think one with ALI Certification (accredited by ANSI) has undergone more stringent safety standards/inspection. . .

Anyone with more knowledge know if ALI cert is indeed legit, or just...
04-17-2019, 01:15 AM
Replies: 57
Views: 5,579
Posted By MBNRG

Thank you, Kevin! We look fwd to your upgrades!

Thank you, Kevin! We look fwd to your upgrades!
04-16-2019, 08:40 PM
Replies: 57
Views: 5,579
Posted By MBNRG

+1 on Purchasing upgraded Subframe Bushings &...

+1 on Purchasing upgraded Subframe Bushings & Diff Bushings ASAP :y
04-16-2019, 01:41 AM
Replies: 57
Views: 5,579
Posted By MBNRG

Thanks, Kevin. Having trouble finding the Rear...

Thanks, Kevin.
Having trouble finding the Rear Subframe Bushings, and Differential Mounts for the W204 C63 on the K-Mac website.
Do you have a link with more info and specs on them?
04-14-2019, 10:10 PM
Replies: 56
Views: 8,009
Posted By MBNRG

+1 on Carbotech A few of the the more...

+1 on Carbotech

A few of the the more seasoned track drivers (BLKROKT, Wobble64) run em, run em hard (on RacingBrake rotors), and have been very pleased with their performance (i believe...
04-12-2019, 06:33 PM
Replies: 329
Views: 41,868
Posted By MBNRG

This is exactly my point, and is illustrated by...

This is exactly my point, and is illustrated by the Volumetric Flow Rate equation above, where the straw's Cross Sectional Area (and hence Flow Rate of air) is greatly reduced, when compared to the...
04-12-2019, 08:31 AM
Replies: 329
Views: 41,868
Posted By MBNRG

ahahaha i know much you love thread...

ahahaha i know much you love thread resurrections, especially those of the intake spacer variety ;P

The airflow path of the C63 is quite complicated and convoluted - you have air flowing in so...
04-12-2019, 01:50 AM
Replies: 329
Views: 41,868
Posted By MBNRG

Unfortunately, I'm not 100% convinced either way....

Unfortunately, I'm not 100% convinced either way.

Both the Spacers and the Magnuson lower airboxes increase total airbox volume over stock - by increasing lower airbox height. Magnuson increases...
04-11-2019, 05:24 AM
Replies: 329
Views: 41,868
Posted By MBNRG

Having discussed with Ken at Magnuson the...

Having discussed with Ken at Magnuson the possibility and fitment of his larger lower airbox for OEM (Non-SC) application, 2 unfortunate conclusions were made:
- The larger Magnuson lower airbox...
04-10-2019, 07:58 PM
Replies: 57
Views: 5,579
Posted By MBNRG

Let's do it! :y (If FCP & Syncro Design...

Let's do it! :y

(If FCP & Syncro Design Works are reading this):
I realize they may be considered a '10yr wear & tear item', however, if the Front LOWER Control Arms can be optimized via...
04-10-2019, 07:42 PM
Replies: 14
Views: 649
Posted By MBNRG

ahahaha at the replies :P You canNOT go...

ahahaha at the replies :P

You canNOT go wrong with either American Racing Headers (ARH; previous generations were known as MHP for Modern Horsepower), or MBH Motorsports Headers.
They do have...
04-04-2019, 09:55 PM
Replies: 24
Views: 1,817
Posted By MBNRG

For those on the fence regarding Long Tube...

For those on the fence regarding Long Tube Headers:

This ARH Group Buy is a GREAT deal - much better than the one offered a few years ago.
ARH quality is superb, from choice of tubing, to welds...
04-03-2019, 11:43 PM
Replies: 37
Views: 8,669
Posted By MBNRG

Thank you, BLKROKT for another informative post...

Thank you, BLKROKT for another informative post :y
Although more 'specialized' knowledge, his technique for fabbing Secondary O2 Emulators should be a sticky.

I don't suppose it is common...
04-03-2019, 05:38 AM
Replies: 3
Views: 517
Posted By MBNRG

Which 'front bumper off' photo are you...

Which 'front bumper off' photo are you referencing?

Stock FL (non-BS) have the Main Oil Cooler and associated Baffle (A 209 505 0830) resting at an angle, likely diverting some air upward to the...
03-28-2019, 01:50 AM
Replies: 329
Views: 41,868
Posted By MBNRG

To put the efficacy of Airbox Intake Spacers to...

To put the efficacy of Airbox Intake Spacers to the test, (or even US Airboxes vs ROW Airboxes, OEM Air filters vs AFE/Aftermarket), could we simply do an A/B Test via the MAFs, checking and...
03-18-2019, 09:28 PM
Replies: 14
Views: 1,713
Posted By MBNRG

Thanks for all of Crya's previous efforts :y ...

Thanks for all of Crya's previous efforts :y

Those now interested - check out Race Consulting Agency. Highly recommend them for this DSS CF DS
03-12-2019, 05:04 PM
Replies: 25
Views: 1,441
Posted By MBNRG

Ridiculous, right?! I truly hope it is small...

Ridiculous, right?!

I truly hope it is small error in just a smaller batch of bad camshafts, likely caused by incorrect drill depth setting.
But a lot of the machining at MB is probably...
03-12-2019, 01:16 AM
Replies: 25
Views: 1,441
Posted By MBNRG

Concerns for undrilled lubrication holes in NEW OEM Camshafts

Make sure to check those new camshafts before installation:

https://www.youtube.com/watch?v=KmuPSjlMwM8
03-08-2019, 09:04 PM
Replies: 6
Views: 638
Posted By MBNRG

Kyle at FCP Euro is amazing! And their Warranty...

Kyle at FCP Euro is amazing! And their Warranty is unmatched https://www.fcpeuro.com/

Vic at Husker Automotive Group Parts (Nebraska) - https://www.mbdirectparts.com/ - Knowledgeable and good...
03-07-2019, 11:27 PM
Replies: 9
Views: 369
Posted By MBNRG

Duffer - good job, and sharp hoodie, man!! :y

Duffer - good job, and sharp hoodie, man!! :y
03-07-2019, 11:22 PM
Replies: 22
Views: 1,374
Posted By MBNRG

Vladds - The Connecting Rod with Part #:...

Vladds - The Connecting Rod with Part #: 1590300020 is in all 3 C63 variants - Performance Package (Output Increase Option 923), Black Series, and 507 Edition, correct?
Does it mention the Year this...
03-07-2019, 08:50 PM
Replies: 22
Views: 1,374
Posted By MBNRG

Conclusions drawn from above 2 Tasos' videos...

Conclusions drawn from above 2 Tasos' videos provided by BLKROKT, in addition to:

https://www.youtube.com/watch?v=Sc4dY2ne6SY

C63 Performance Package (2014 507 used as reference here, per...
03-07-2019, 04:09 PM
Replies: 15
Views: 953
Posted By MBNRG

561Design - if no access to Xentry, can...

561Design - if no access to Xentry, can reset/erase SRS error codes (after connecting all necessary SRS harnesses) with certain OBD Scanner apps like Carly for Mercedes (worked very well for me).
03-07-2019, 04:02 PM
Replies: 6
Views: 670
Posted By MBNRG

Good question, Vladds. Have often wondered the...

Good question, Vladds. Have often wondered the same myself, but the concern for a U.S. Dealership screwing something up during update process always outweighed any benefit, for me at least.
I had...
03-05-2019, 12:09 AM
Replies: 53
Views: 2,132
Posted By MBNRG

Good catch! Yes, the W203 chassis states wheel...

Good catch!
Yes, the W203 chassis states wheel bolt torque = 110 +/- 10 Nm (81 +/- 7 ft-lbs)

VM, i think you may have your culprit if you were doing 100 ft-lbs, and/or using different ball/radius...
03-04-2019, 10:27 PM
Replies: 53
Views: 2,132
Posted By MBNRG

VM I see your mention of both bolts and...

VM

I see your mention of both bolts and wheels having matching 'spherical' (ie ball or radius) seats - what was the measurement of the bolt's radius seat?
Bolts come in a variety of measures 12R,...
02-26-2019, 04:35 PM
Replies: 6
Views: 677
Posted By MBNRG

Doug! You were the other member I was going to...

Doug!
You were the other member I was going to contact. I think your definition of 'hard track use', even on street tires, will be above & beyond 99% of us on here :D
(Sorry for the thread hijack,...
02-25-2019, 11:28 PM
Replies: 6
Views: 677
Posted By MBNRG

Mort, you have vast wheel experience. I have...

Mort, you have vast wheel experience.
I have hard track use in mind, and am also looking to maximize wheel width (front & rear) on a FL coupe with stock ride height, without any fender mods (no...
02-11-2019, 01:57 AM
Replies: 10
Views: 729
Posted By MBNRG

Thank you! :y Please let us know what you find,...

Thank you! :y
Please let us know what you find, and if MB EPC gives a date when they changed to updated cover, o-ring, or both?
02-02-2019, 06:55 PM
Replies: 88
Views: 25,560
Posted By MBNRG

As BLKROKT mentioned, your stock non-BS C63 spare...

As BLKROKT mentioned, your stock non-BS C63 spare will not clear the new position of the front calipers.

I had previously asked the same question as you:...
01-29-2019, 08:21 PM
Replies: 17
Views: 677
Posted By MBNRG

Ok so I'll make this simple... :p: If an FL...

Ok so I'll make this simple... :p:

If an FL W204 C63 is within your range, why not his and hers C63's?
Happy wife, happy life :y
01-24-2019, 04:58 AM
Replies: 7
Views: 1,000
Posted By MBNRG

INA seems to be an original equipment supplier...

INA seems to be an original equipment supplier for Lifters
However, these INA (non-MB AMG branded) Lifters may be spec'd slightly differently than the MB AMG branded/spec'd Lifters in regards to...
01-21-2019, 12:31 AM
Replies: 45
Views: 4,569
Posted By MBNRG

Glad to see the FL Hood worked out :y Looks...

Glad to see the FL Hood worked out :y
Looks great bud!!

Plz stay safe
01-17-2019, 07:08 AM
Replies: 20
Views: 783
Posted By MBNRG

Sexy stuff as always, Matt! PM'd via your...

Sexy stuff as always, Matt!

PM'd via your email :y
01-08-2019, 07:42 PM
Replies: 36
Views: 3,167
Posted By MBNRG

was referring to the Airbag Seat Occupancy Sensor...

was referring to the Airbag Seat Occupancy Sensor connector, which I believe is Yellow in photo below :y
...
01-07-2019, 05:30 PM
Replies: 36
Views: 3,167
Posted By MBNRG

Arrow I believe simply disconnecting the sensor...

I believe simply disconnecting the sensor underneath the passenger seat will prevent passenger airbag deployment when a passenger is seated.
(This will trigger a warning light that cannot be erased...
01-06-2019, 05:05 PM
Replies: 24
Views: 1,355
Posted By MBNRG

Question Thank you Kyle and FCP crew for another great...

Thank you Kyle and FCP crew for another great offering :y

1. Are these Front OE Lemforder Upper Control / Thrust Arms via FCP/SDW the same beefiness as the OEM C63 Arms?

2. Is there anything...
01-01-2019, 04:36 PM
Replies: 7
Views: 836
Posted By MBNRG

Happy New Year, from our fam to yours ;) ...

Happy New Year, from our fam to yours ;)

https://www.youtube.com/watch?v=4N-pRA_Irvk
12-31-2018, 04:31 PM
Replies: 21
Views: 2,535
Posted By MBNRG

Well aware of tire widths, discrepancies, etc :y ...

Well aware of tire widths, discrepancies, etc :y

Both examples provided worked well for those respective owners. OP will obviously need to further his research and reach out to them to determine...
12-31-2018, 12:41 AM
Replies: 16
Views: 1,352
Posted By MBNRG

In your professional opinion, what would cause...

In your professional opinion, what would cause this Cam Adjuster failure after removal/re-installation?
Improper re-installation?
12-31-2018, 12:26 AM
Replies: 21
Views: 2,535
Posted By MBNRG

A real world example of running what likely is...

A real world example of running what likely is the very maximum tire width (305) and wheel size (20 x 10.5") on stock fenders:
Would probably not recommended this setup for the track as the...
12-31-2018, 12:17 AM
Replies: 21
Views: 2,535
Posted By MBNRG

A real world example of running 275 width tire on...

A real world example of running 275 width tire on 19 x 10" rim in the rear on stock fenders, using +50 offset:...
12-26-2018, 10:44 PM
Replies: 11
Views: 762
Posted By MBNRG

Hi Ken, would greatly appreciate that Magnuson...

Hi Ken, would greatly appreciate that Magnuson Part # for the Facelift Low Temp Radiator
TIA
12-24-2018, 12:42 AM
Replies: 23
Views: 3,570
Posted By MBNRG

That would do it. Ain't no pin-flip trick gonna...

That would do it. Ain't no pin-flip trick gonna work on that plate from Bank 2 :/
Any idea of approx mileage when symptoms of vibration first appeared?
12-23-2018, 06:49 PM
Replies: 23
Views: 3,570
Posted By MBNRG

Wing: Any photos of the defective adjuster, and...

Wing: Any photos of the defective adjuster, and what the adjuster plate looked like, and if it had visible wear?
12-22-2018, 06:42 PM
Replies: 7
Views: 607
Posted By MBNRG

as mentioned, keep water, especially pressurized...

as mentioned, keep water, especially pressurized water, away from the air boxes and air intake nozzles/inlets/tubes - they are plastic, do not have rubber gaskets/seals, and hence are not water tight...
12-21-2018, 02:21 PM
Replies: 245
Views: 24,433
Posted By MBNRG

I will be installing per Lee's and Ahmad's...

I will be installing per Lee's and Ahmad's recommendations: CV joint end to mate with the Trans side, and the U-Joint to mate with the Rear Differential side.

:y

Love the ECE Mounts, btw Ahmad...
12-15-2018, 10:35 PM
Replies: 28
Views: 2,147
Posted By MBNRG

I can def understand the frustration. Check...

I can def understand the frustration.

Check my post for Tracy's new contact info: https://mbworld.org/forums/c63-amg-w204/729650-oediscountparts-site-trouble.html#post7630940
12-15-2018, 10:34 PM
Replies: 9
Views: 988
Posted By MBNRG

Spoke to Tracy - website is down, old email is...

Spoke to Tracy - website is down, old email is down, new ownership (as mentioned).

She expressed that she will take the same care of us - contact her at new email address:...
12-12-2018, 08:15 PM
Replies: 117
Views: 21,593
Posted By MBNRG

Invoice from MB Dealership in California showed...

Invoice from MB Dealership in California showed 2.6 hrs on a friend's car with headers - more cramped and hence more time intensive
12-05-2018, 05:22 PM
Replies: 27
Views: 4,221
Posted By MBNRG

BUMP for a great guy and pioneer of our W204...

BUMP for a great guy and pioneer of our W204 platform :y
11-30-2018, 02:23 AM
Replies: 10
Views: 683
Posted By MBNRG

Limited production numbers (Coupe had 100...

Limited production numbers (Coupe had 100 allocations to North American market I believe)
Matte/Satin Paint
Red stitched leather interior, lower red steering wheel leather trim
Seat headrests...
11-27-2018, 07:43 PM
Replies: 245
Views: 24,433
Posted By MBNRG

For those sliding around with the DSS CF...

For those sliding around with the DSS CF Driveshaft, in what orientation did you install the Driveshaft?

Lee at DSS recommends in our C63 application for the CV joint end to mate with the Trans...
11-23-2018, 12:08 AM
Replies: 15
Views: 1,514
Posted By MBNRG

Race Consulting Agency will beat this price over...

Race Consulting Agency will beat this price over the phone if you offer a fee free payment method, as previously mentioned :y
RCA is legit.
11-14-2018, 08:36 PM
Replies: 131
Views: 23,933
Posted By MBNRG

BUMP for a great dude and seller - I enjoy the...

BUMP for a great dude and seller - I enjoy the flawless CF Spoiler every day - was just as described and was packaged meticulously.

Ideally, the TB Plate should be upgraded, as the OE plate is...
11-12-2018, 12:01 AM
Replies: 127
Views: 13,909
Posted By MBNRG

Interior of the 2012 Brabus Bullit 800 with the...

Interior of the 2012 Brabus Bullit 800 with the bi-turbo V12
11-11-2018, 05:59 PM
Replies: 87
Views: 8,321
Posted By MBNRG

So Studio RSR finally got back to my emails, as...

So Studio RSR finally got back to my emails, as they had recently returned from SEMA:

1. What are the weights for the DOM cage, and for the 4130 Chromoly cage?
The DOM cage is about 70lbs, and...
11-05-2018, 02:46 AM
Replies: 26
Views: 5,014
Posted By MBNRG

[/LEFT] Whoops. Plz disregard. Looks...

[/LEFT]

Whoops. Plz disregard.

Looks like you already had the Sealing Compound in the Invoice above. :y
11-05-2018, 02:37 AM
Replies: 4
Views: 958
Posted By MBNRG

OP, please reference this post for the much...

OP, please reference this post for the much lighter standard/plain OEM coupe roof - part numbers courtesy of Vladds:...
11-05-2018, 02:27 AM
Replies: 13
Views: 817
Posted By MBNRG

Big THANK YOU to Vladds for finding the OEM Part...

Big THANK YOU to Vladds for finding the OEM Part #s for the standard/plain Coupe Roof without any Pano/Moon/Sun/Whatever:
A 207 657 00 09

In addition, there appears to be a central stiffening...
10-24-2018, 05:14 PM
Replies: 27
Views: 2,032
Posted By MBNRG

SAVAGE cold start is one of the BEST ways to...

SAVAGE cold start is one of the BEST ways to start any morning!

An ez way to reduce the cold startup scream is find/make 2 boxes tall enough/wide enough to surround both sets of exhaust tips, and...
10-24-2018, 05:06 PM
Replies: 15
Views: 734
Posted By MBNRG

Wing is correct, updated dipstick # is A 156 010...

Wing is correct, updated dipstick # is A 156 010 17 72
Compare updated handle end design with better seal vs the old one:

Updated version:...
10-24-2018, 04:27 PM
Replies: 22
Views: 2,529
Posted By MBNRG

Interesting read and findings, especially...

Interesting read and findings, especially regarding the fuel rail and injector flow tolerances!

Thank you for sharing, Vladds :y

Please let us know if you find anything regarding discrepancies...
10-23-2018, 05:55 PM
Replies: 13
Views: 817
Posted By MBNRG

Yes, this is discussed here:...

Yes, this is discussed here: https://mbworld.org/forums/c63-amg-w204/338447-carbon-fiber-roof-c63.html

Thanks, let us know their reply
10-23-2018, 04:45 PM
Replies: 13
Views: 817
Posted By MBNRG

I recall Keith (Dads C63) had a CF panel...

I recall Keith (Dads C63) had a CF panel installed on his PFL sedan to delete his sunroof (not an entire CF roof), I believe his shop was located in FL.
Will post up after I contact him.
10-23-2018, 04:40 PM
Replies: 13
Views: 817
Posted By MBNRG

Arrow OEM Coupe Parts vs CF Roof for Pano Roof Delete

It is reported that some Euro and Japanese spec'd Black Series coupes came with a standard roof (instead of Pano roof).

If available, would greatly appreciate a list of the MB Part #'s to attempt...
10-23-2018, 04:28 PM
Replies: 87
Views: 8,321
Posted By MBNRG

Bolt In Half Cage / Roll Bar & Rear Seat Delete Available :)

https://studiorsr.com/collections/c63-w204/products/mercedes-c63-roll-cage-roll-bar

Studio RSR also has a Rear Seat Delete option available with carbon fiber or aluminum panels with suede fabric
...
10-23-2018, 04:11 PM
Replies: 15
Views: 734
Posted By MBNRG

Yes. Prudent to check the plastic pieces at the...

Yes. Prudent to check the plastic pieces at the end. Only 25K miles, and the 1st oil level marker (proximal) had nearly cracked all the way through. No previous trauma.
Replaced it with the new,...
10-05-2018, 08:04 PM
Replies: 31
Views: 1,574
Posted By MBNRG

Thread with more feedback from those who have...

Thread with more feedback from those who have installed the Front & Rear bars (on a W204 non-AMG, but still applicable), and addresses the 2 mounting positions on the Front bar, and the OEM mounts...
10-04-2018, 06:08 PM
Replies: 31
Views: 1,574
Posted By MBNRG

The Pelican DIY guide for the Rear Bar...

The Pelican DIY guide for the Rear Bar demonstrates that it's possible to swap the rear bars without dropping the Rear Sub Frame (at least on a non-AMG).
I recall BLKROKT dropped the Rear Sub Frame...
10-01-2018, 04:59 PM
Replies: 31
Views: 1,574
Posted By MBNRG

GREAT Deal! The Front & Rear combo (Part...

GREAT Deal!

The Front & Rear combo (Part 2578.320) is a steal at $247: https://eibach.com/us/i-2460-anti-roll-kit-front-and-rear-sway-bars.html

I still have to install these Front and Rear...
09-29-2018, 07:17 AM
Replies: 8
Views: 936
Posted By MBNRG

Was there no room for the ESS HE to mount on the...

Was there no room for the ESS HE to mount on the top part of the bumper bar (like the Magnuson builds and a few Weistecs)?

Asbjorn at ESS informed me that they had not tried this top mount...
09-28-2018, 02:13 PM
Replies: 115
Views: 14,915
Posted By MBNRG

Should be good now :y

Should be good now :y
09-28-2018, 11:43 AM
Replies: 115
Views: 14,915
Posted By MBNRG

Matt! Brother, i changed my mind - i will take...

Matt! Brother, i changed my mind - i will take them, please!
Also, custom order will be shipping to you soon.

Thanks again for the other trim pieces - lovely craftsmanship!
09-19-2018, 03:38 AM
Replies: 31
Views: 24,877
Posted By MBNRG

A few reasons: OEM LSD is made by Drexler, one...

A few reasons:
OEM LSD is made by Drexler, one of the very best LSD manufacturers, and already performs well with factory lockup of ~40%.
This lockup performance from factory is greater than that...
09-17-2018, 01:31 AM
Replies: 24
Views: 4,494
Posted By MBNRG

That does look quite pristine. Tempting! Any...

That does look quite pristine. Tempting!

Any shots of the interior?
09-16-2018, 04:17 PM
Replies: 18
Views: 865
Posted By MBNRG

I'm dead serious! :p: This was a good...

I'm dead serious! :p:



This was a good move. Mold and other irritants possibly trapped in filter could potentially elicit similar symptoms. But yours persist despite this.
If CO measurements...
09-15-2018, 07:28 PM
Replies: 18
Views: 865
Posted By MBNRG

This is an interesting situation, as you seem to...

This is an interesting situation, as you seem to have likely controlled for a few variables (different vehicles, occupants, etc). Again, without knowing more of your (medical) history and...
09-15-2018, 02:50 AM
Replies: 8
Views: 747
Posted By MBNRG

I can only speak for their CF Intake - quality of...

I can only speak for their CF Intake - quality of weave, and of UV clear coat was exceptional, but had to trim a very small amount to get it to fit properly. This seems like a common issue with the...
09-15-2018, 12:29 AM
Replies: 8
Views: 747
Posted By MBNRG

Revozport may be the originator of said front...

Revozport may be the originator of said front splitter, and they likely still make/stock them:
https://tinyurl.com/y7rqtzu2

Contact member Phil Chow - he may be able to score you a good deal.
09-09-2018, 12:28 AM
Replies: 18
Views: 865
Posted By MBNRG

Do these symptoms occur while driving other cars,...

Do these symptoms occur while driving other cars, or just your own?
Without knowing more of your history and presentation, new onset "dizziness" (this can be a very nebulous term and requires a more...
09-07-2018, 12:57 AM
Replies: 7
Views: 574
Posted By MBNRG

Depends on the body shop.

Depends on the body shop.
09-06-2018, 03:30 PM
Replies: 19
Views: 865
Posted By MBNRG

LOL! SMDH, hopefully MB and Takata sort this...

LOL!

SMDH, hopefully MB and Takata sort this airbag mess out. Wonder if Takata or different co will manufacture the replacement airbags
09-06-2018, 03:26 PM
Replies: 7
Views: 574
Posted By MBNRG

Have a mint OEM FL hood (non-507) in factory...

Have a mint OEM FL hood (non-507) in factory designo magno night black that you can cut like member BLKROKT and achieve the same results for less
08-27-2018, 05:14 PM
Replies: 12
Views: 720
Posted By MBNRG

I can be OCD, and personally would never buy a...

I can be OCD, and personally would never buy a vehicle sight unseen unless already built a trusting relationship with seller. Even then it can be a roll of the dice.
Too much involved with a...
08-21-2018, 03:45 PM
Replies: 8
Views: 520
Posted By MBNRG

New gears are not necessary. Retain the same Ring...

New gears are not necessary. Retain the same Ring Gear and Pinion, etc. Only changes recommended are in my initial post.
May be prudent to have shop doing install check backlash, preload, and gear...
08-20-2018, 08:47 PM
Replies: 8
Views: 520
Posted By MBNRG

Assuming what you are describing is the entire...

Assuming what you are describing is the entire Diff Housing unit:

"Mfg Part #: 2043510508" is just for the Diff Cover itself
" Interchange Part #: 2043508414" i cannot find.

Because previous...
08-17-2018, 02:52 AM
Replies: 16
Views: 1,477
Posted By MBNRG

Member Celicasaur also has a contact in the UK...

Member Celicasaur also has a contact in the UK who can tune TCU
08-17-2018, 01:59 AM
Replies: 4
Views: 408
Posted By MBNRG

#10 in the link below for the Mobil 1 decal, the...

#10 in the link below for the Mobil 1 decal, the other one should also be in there:

https://tinyurl.com/ya7fdsoa

or in

https://tinyurl.com/ycxmu7aq
08-16-2018, 03:19 PM
Replies: 16
Views: 1,477
Posted By MBNRG

What are the 5 shops that can tune the TCU?...

What are the 5 shops that can tune the TCU? (besides Eurocharged & Speed Driven)
08-15-2018, 05:45 PM
Replies: 24
Views: 8,914
Posted By MBNRG

Nice work, OP Wanted to add another tape...

Nice work, OP

Wanted to add another tape alternative for those who are in a similar boat, or who will be seeing very high temperatures in general, and at the track:
3M VHB Tape GPH-160GF...
08-15-2018, 05:33 PM
Replies: 7
Views: 838
Posted By MBNRG

If you have the OEM BS/507 hood, the CF Vents...

If you have the OEM BS/507 hood, the CF Vents from Mode Carbon should not have any issues, just ensure they are properly installed with strong, heat resistant tape, doubled up, on the sides of these...
08-15-2018, 05:21 PM
Replies: 43
Views: 3,236
Posted By MBNRG

LOL! Yeah, Cali sucks for a lot of things,...

LOL!

Yeah, Cali sucks for a lot of things, but there is 100oct available at some pumps, for $9-10 per gallon.
Can mix in a few gallons with the 91oct to achieve 93oct or higher, depending on...
08-15-2018, 05:13 PM
Replies: 8
Views: 1,178
Posted By MBNRG

MB dealership also has a procedure that they run...

MB dealership also has a procedure that they run via OBD that actuates the adjusters, and records the sound, then can compare this to a database of unhealthy adjuster sounds.
You can have a record...
08-13-2018, 11:57 PM
Replies: 7
Views: 838
Posted By MBNRG

Jim, i wonder if you can epoxy or even weld some...

Jim, i wonder if you can epoxy or even weld some mounts under your hood for the OEM diverter trays, as they are held in place by 4 push in plastic clips per tray.
They certainly serve a purpose. And...
08-13-2018, 09:13 PM
Replies: 7
Views: 838
Posted By MBNRG

Referencing photo below of OEM 507/Black Series...

Referencing photo below of OEM 507/Black Series Hood:

Yellow Oval = Under-hood insulation pad
Red Rectangle = Plastic diverter tray
Green Diamond = Open space displaying large fan shroud and...
08-13-2018, 08:56 PM
Replies: 7
Views: 838
Posted By MBNRG

Water gets in, but is diverted: on the OEM...

Water gets in, but is diverted:
on the OEM 507/Black Series hood, there are 2 plastic diverter trays lying immediately under the hood vents that direct the water flow to run over the large fan...
08-11-2018, 08:02 PM
Replies: 99
Views: 11,030
Posted By MBNRG

Had mine done by Tony Barber at Turn In Concepts...

Had mine done by Tony Barber at Turn In Concepts near Cincinnati, OH - ~4 hour drive from you. Great dudes, great shop!
They work on a lot of C63's, and one of their lead techs owns a C63

Another...
08-07-2018, 08:15 PM
Replies: 10
Views: 811
Posted By MBNRG

I believe member CaptnCharisma had installed the...

I believe member CaptnCharisma had installed the SLS Black Series lifters during his engine rebuild
08-07-2018, 07:43 PM
Replies: 10
Views: 811
Posted By MBNRG

Thanks, Vladds. For clarification, of the 2...

Thanks, Vladds.

For clarification, of the 2 part numbers you listed above, which is for the SLS *Black Series* lifters? (I'd assume the one starting with 159)
08-07-2018, 02:52 AM
Replies: 10
Views: 811
Posted By MBNRG

I believe these are the SLS Black Series Lifters...

I believe these are the SLS Black Series Lifters for the M156 that you mention, Vladds - they are available from Weistec:

https://tinyurl.com/ybx37v6h

Appears they have some kind of...
08-06-2018, 05:30 PM
Replies: 57
Views: 5,381
Posted By MBNRG

I take it you were not running a catch can,...

I take it you were not running a catch can, correct?

Good call on scoping yourself! Best of luck, and hope you get your mods back man
07-31-2018, 04:22 AM
Replies: 123
Views: 31,878
Posted By MBNRG

MC sells both the entire BS/507 Hood in CF, and...

MC sells both the entire BS/507 Hood in CF, and the CF Hood Vent Inserts (not needed if you go with the MC BS/507 CF Hood).

For these CF Hood Vents to work, you will need your hood cut, or...
07-22-2018, 05:18 PM
Replies: 5
Views: 867
Posted By MBNRG

SOLD Thank you, Dale Ross - a gentleman and...

SOLD

Thank you, Dale Ross - a gentleman and fellow enthusiast!
07-10-2018, 12:21 AM
Replies: 4
Views: 701
Posted By MBNRG

Final Drive (ratio) will likely be stamped on...

Final Drive (ratio) will likely be stamped on differential carrier and/or diff's ring gear, check pics in thread below:...
07-03-2018, 04:07 AM
Replies: 7
Views: 855
Posted By MBNRG

$608? :/ 2 Bearings with Cups (Right + Left)...

$608? :/

2 Bearings with Cups (Right + Left) are ~$100-120 each. Note that the Bearing + Bearing Cup is different for each side, and the Left side has a different part # than the Right side....
06-27-2018, 07:08 PM
06-27-2018, 06:53 PM
Replies: 11
Views: 1,392
Posted By MBNRG

IIRC, the whistle was attributed to faulty or...

IIRC, the whistle was attributed to faulty or incorrectly seated rubber weather stripping between the top of this upper grill trim piece and bottom edge of hood.

If we're going the lengths to...
06-26-2018, 04:54 PM
Replies: 11
Views: 1,392
Posted By MBNRG

There may be some potential added air flow, if...

There may be some potential added air flow, if the top portion of the front grill (that attaches to the hood with screws) is removed.

At least on FL. Not sure about the PFL grill.
06-22-2018, 06:15 PM
06-19-2018, 05:57 PM
Replies: 5
Views: 867
Posted By MBNRG

Thread gets moved. This may help someone looking...

Thread gets moved. This may help someone looking for this upgrade, and will help me sell them :y

Thanks for your helpful feedback.
06-19-2018, 05:38 PM
Replies: 5
Views: 867
Posted By MBNRG

Arrow Caliper Brackets for Black Series Brake Rotors On Stock Calipers

Step up to larger Black Series size 390mm brakes on the C63 W204:
...
06-17-2018, 05:09 PM
Replies: 37
Views: 2,646
Posted By MBNRG

Yes, but one must obtain CCL from the Sheriff of...

Yes, but one must obtain CCL from the Sheriff of one's county of residence. And as you astutely noted, if one is a resident of an urban county, they are SOL (unless they move to a more favorable...
06-17-2018, 04:58 PM
Replies: 6
Views: 602
Posted By MBNRG

Been down a similar path, and these...

Been down a similar path, and these considerations were helpful:

-There are reports that ceramic/metallic tints can interfere with on-board Laser/Radar detector (if you have one), in addition to...
06-17-2018, 04:50 PM
Replies: 37
Views: 2,646
Posted By MBNRG

Off topic, but CA has so many counties in which...

Off topic, but CA has so many counties in which it's virtually impossible to obtain CCW.
Which county in NorCal was able to issue?
06-16-2018, 07:28 PM
Replies: 37
Views: 2,646
Posted By MBNRG

So F disturbing. May she Rest in Peace.

So F disturbing.

May she Rest in Peace.
06-09-2018, 04:48 PM
Replies: 5
Views: 825
Posted By MBNRG

Header install was ~600, LSD install was ~480 ...

Header install was ~600, LSD install was ~480
Will need new Exhaust manifold gaskets ~35

Ceramic coating from Swain Tech was ~700 all in with return shipping from NY, but had all pipes coated...
06-09-2018, 04:42 PM
Replies: 4
Views: 546
Posted By MBNRG

https://cimg2.ibsrv.net/gimg/www.mbworld.org-vbull...

https://cimg2.ibsrv.net/gimg/www.mbworld.org-vbulletin/640x531/weeknd_bump_f97416f31ab4939f5a20efdfa992d18f0d36e98f.jpg

The Weeknd BUMP
06-08-2018, 04:11 AM
Replies: 5
Views: 825
Posted By MBNRG

lived not too far from AA, and ended up at Turn...

lived not too far from AA, and ended up at Turn in Concepts near Cincinnati, OH - Tony Barber and his shop install many ARH LT systems on the C63, as well as LSDs.
They also do in-house tuning with...
06-06-2018, 08:32 PM
06-06-2018, 05:49 PM
06-06-2018, 05:48 PM
Replies: 2
Views: 706
Posted By MBNRG

Question Black Series Spare Wheel/Tire Donut - What is the Part No. & Dimensions?

Anyone know the MB Part # , Wheel Width, and ET (Offset) for the Black Series Spare Wheel/Tire Donut?
Spare Wheel diameter should be 19"
Spare Tire dimensions would also be appreciated.

TIA
06-06-2018, 05:14 PM
Replies: 27
Views: 4,064
Posted By MBNRG

Have this Bolt (attaching Front Caliper to...

Have this Bolt (attaching Front Caliper to Caliper Bracket) in hand - after flaking off some red paint, it appears it is 10.9 grade, and M12
06-06-2018, 04:07 PM
Replies: 25
Views: 2,016
Posted By MBNRG

Jim, you are correct, Rear Caliper bolts directly...

Jim, you are correct, Rear Caliper bolts directly to Rear Knuckle. Bolt Part Numbers for Rear Caliper to Knuckle are above - they are different than the Front Caliper Bracket/Adapter/Retainer to...
06-06-2018, 04:27 AM
Replies: 27
Views: 4,064
Posted By MBNRG

Thanks, Joe. Number 35 in that PDF appears to...

Thanks, Joe.
Number 35 in that PDF appears to be of the 2 bolts attaching the Caliper Bracket to the Knuckle, no?
Jasonoff (and myself) are wondering what the Torque specs are for the 2 Allen/Hex...
06-06-2018, 04:03 AM
Replies: 25
Views: 2,016
Posted By MBNRG

Thank you Is the Rear Caliper to Knuckle Bolt...

Thank you
Is the Rear Caliper to Knuckle Bolt (A0189900001) the same as the Front Caliper Bracket to Knuckle Bolt?
06-05-2018, 04:59 PM
Replies: 14
Views: 1,256
Posted By MBNRG

BS uses slightly different Front Calipers than...

BS uses slightly different Front Calipers than non-BS, with different Caliper Bracket as well ;P
Forum: Marketplace
06-04-2018, 03:44 PM
Replies: 2
Views: 286
Posted By MBNRG

Recommend contacting RacingBrake directly - they...

Recommend contacting RacingBrake directly - they make a great product
Forum: Marketplace
06-03-2018, 04:24 PM
Replies: 2
Views: 286
Posted By MBNRG

NEW Caliper Brackets for Black Series Brake Rotors On Stock Calipers

Step up to larger 390mm brakes on the C63 W204

THESE BRACKETS WORKS DIRECTLY WITH YOUR STOCK C63 FRONT CALIPERS (NO NEED TO CHANGE CALIPERS)
Simply install these brackets to your existing stock...
06-03-2018, 04:17 PM
Replies: 4
Views: 546
Posted By MBNRG

Arrow NEW Caliper Brackets for Black Series Brake Rotors On Stock Calipers

Step up to larger 390mm brakes on the C63 W204

THESE BRACKETS WORKS DIRECTLY WITH YOUR STOCK C63 FRONT CALIPERS (NO NEED TO CHANGE CALIPERS)
Simply install these brackets to your existing stock...
05-30-2018, 04:47 PM
Replies: 195
Views: 23,348
Posted By MBNRG

Doug and Maz - sound advice. Unfortunately,...

Doug and Maz - sound advice.

Unfortunately, 18" won't work up front for those of us with the RB 390mm rotors, as mentioned.

Seems we have lots of trade offs with this car, unless we drop...
05-29-2018, 03:27 AM
Replies: 2
Views: 547
Posted By MBNRG

Should have a pair available for you. Will PM...

Should have a pair available for you.
Will PM you this week.
05-26-2018, 04:32 PM
Replies: 5
Views: 420
Posted By MBNRG

Had the same thing happen, and lost my mechanical...

Had the same thing happen, and lost my mechanical key, etc in that abysmal void that is the In-Between.

Luckily, the seat is easy to unbolt, pivot, and move around without necessarily needing to...
05-24-2018, 12:11 AM
Replies: 71
Views: 8,169
Posted By MBNRG

If the TCU is tuned properly to account for the...

If the TCU is tuned properly to account for the SC and new Final Drive, would this also apply to a Built Trans? (Weistec or Alpha AMS clutches)
05-23-2018, 07:13 PM
Replies: 31
Views: 2,718
Posted By MBNRG

MB does indeed offer OEM wheel bolts in Black...

MB does indeed offer OEM wheel bolts in Black with correct ball/radius seats and lengths.
Have them myself, but unfortunately no Part # on them.
These threads may help:...
05-01-2018, 09:04 PM
Replies: 1
Views: 754
Posted By MBNRG

C63 COUPE Carbon Fiber Seat Back Covers

Plenty of offerings for the sedan style seats, but where to find the CF seatbacks for the Coupe style seats?
...
04-25-2018, 09:08 PM
Replies: 201
Views: 41,153
Posted By MBNRG

OP - the touchscreen you posted is for the...

OP - the touchscreen you posted is for the Pre-Facelift, correct?

Here is one for the Facelift taken off a different forum:...
04-20-2018, 05:06 PM
Replies: 117
Views: 21,593
Posted By MBNRG

Engine mounts are works of art, the design and...

Engine mounts are works of art, the design and quality appear superb.
Can't wait to get these bad boys on.

Thank you, Ahmad!
04-20-2018, 04:55 PM
Replies: 13
Views: 1,799
Posted By MBNRG

Strong work, Ahmad!! What tires?

Strong work, Ahmad!!

What tires?
04-06-2018, 12:40 AM
Replies: 156
Views: 26,996
Posted By MBNRG

That's good news; you are one of our most...

That's good news; you are one of our most experienced SC'd members. How many miles on the factory rods at 700whp?
04-05-2018, 06:23 AM
Replies: 156
Views: 26,996
Posted By MBNRG

Crazy gains, Kavik! Something to think about...

Crazy gains, Kavik!

Something to think about for all who are considering SC'ing (myself included): Tasos et al report bent rods occurring at 600whp and above:
youtube.com/watch?v=z1QHYBs5mK8
...
04-05-2018, 05:56 AM
Replies: 21
Views: 1,395
Posted By MBNRG

[/left] STRONG Work! Muffler Delete?

[/left]
STRONG Work!

Muffler Delete?
04-05-2018, 05:46 AM
Replies: 6
Views: 604
Posted By MBNRG

What you're looking for is called the AMG...

What you're looking for is called the AMG Performance Media.
It is possible, but will require additional hardware in the form of a Performance Media Controller, etc.

Members Kosmos and Gudikcik...
04-03-2018, 03:15 PM
Replies: 32
Views: 3,663
Posted By MBNRG

https://mbworld.org/forums/c63-amg-w204/357629-big...

https://mbworld.org/forums/c63-amg-w204/357629-bigger-throttle-bodies-please-comment-6.html
03-30-2018, 06:45 PM
Replies: 156
Views: 26,996
Posted By MBNRG

I had spoken to ESS about my concerns for...

I had spoken to ESS about my concerns for reduction in cool air flow to Front Main oil cooler, and to the Trans Cooler (which already has reduced air flow since behind front bumper bar), and asked if...
03-30-2018, 06:24 PM
Replies: 8
Views: 1,417
Posted By MBNRG

Great find, OP! Another alternative: For...

Great find, OP!

Another alternative: For less than BP price of $1700, one can go full Black Series cooling on this Front Main Oil Cooler, which will likely have better air flow. It will require...
03-10-2018, 07:48 PM
Replies: 245
Views: 24,433
Posted By MBNRG

Thanks for looking into this, Vladds. Where is...

Thanks for looking into this, Vladds.
Where is the Black Series DS with Part # 204 410 25 00 available for $750? Lowest I can find from reputable sources is $924 + shipping.
Interestingly, the FL...
03-07-2018, 07:11 PM
Replies: 195
Views: 23,348
Posted By MBNRG

we mock what we do not understand. these mods...

we mock what we do not understand.
these mods are function >>> style, as the owner hits the track hard.
Forum: Marketplace
03-04-2018, 03:37 PM
03-04-2018, 03:36 PM
02-27-2018, 05:35 PM
Replies: 73
Views: 6,262
Posted By MBNRG

Magnuson was seeking CARB cert back in 2016, they...

Magnuson was seeking CARB cert back in 2016, they may have since obtained cert
02-24-2018, 12:35 AM
Replies: 27
Views: 3,800
Posted By MBNRG

ADD has a baffled catch can for $99 (ADD W1...

ADD has a baffled catch can for $99 (ADD W1 Baffled Oil Catch Can V3)

Further discussed in thread:
https://mbworld.org/forums/c63-amg-w204/692812-oil-catch-can.html
02-23-2018, 07:48 PM
Replies: 245
Views: 24,433
Posted By MBNRG

I would be very interested. Initially I was...

I would be very interested.

Initially I was very disappointed to learn of the less than 1lb of difference between the CF and OEM steel units.
But it seems there are favorable reports of improved...
02-19-2018, 04:05 AM
Replies: 63
Views: 7,110
Posted By MBNRG

Thanks for setting up this GB, Ahmad Does...

Thanks for setting up this GB, Ahmad

Does the bottom of the ESS SC contact the engine valley? What heat shielding does the ESS unit employ at the bottom near the valley?

Do you have any...
02-17-2018, 01:00 AM
Replies: 72
Views: 8,532
Posted By MBNRG

ahahaha Photo cred goes to Dave @ EC Austin on...

ahahaha
Photo cred goes to Dave @ EC Austin on another thread ;)
02-17-2018, 12:40 AM
Replies: 72
Views: 8,532
Posted By MBNRG

Doc, what version are the old injectors: Q2, 3,...

Doc, what version are the old injectors: Q2, 3, or 4?

https://cimg1.ibsrv.net/gimg/www.mbworld.org-vbulletin/640x747/mb_injectors_65dc31279c5a54f3a970a1874bb5b65d99fbcc73.jpg
02-17-2018, 12:38 AM
02-07-2018, 11:11 PM
Replies: 45
Views: 6,394
Posted By MBNRG

If no one near you, John Shepherd at ShepTrans in...

If no one near you, John Shepherd at ShepTrans in OH is one of the most trusted names in trans builds for the Nissan GTR, and owns an AMG (or two) himself.
I was gonna go to him for some LSD work,...
02-06-2018, 08:24 PM
Replies: 43
Views: 21,658
Posted By MBNRG

Hi brother, what does he recommend? Could you plz...

Hi brother, what does he recommend? Could you plz post Tassos's comments or video?
02-04-2018, 09:56 PM
Replies: 71
Views: 5,854
Posted By MBNRG

Yes. Had posted UR Malaysia's reply ~1yr ago on a...

Yes. Had posted UR Malaysia's reply ~1yr ago on a different thread:

"I'm so sorry to tell you that this Rear Lower Bars UR RLS4-1826P no longer in production. The design couldn't support for the...
02-02-2018, 07:14 PM
Replies: 29
Views: 2,158
Posted By MBNRG

Congrats on the W205, but sad to see you go ...

Congrats on the W205, but sad to see you go

PM sent
02-01-2018, 10:29 PM
Replies: 71
Views: 5,854
Posted By MBNRG

Nada. Looks like custom fabbing will be the way...

Nada. Looks like custom fabbing will be the way to go

https://cimg3.ibsrv.net/gimg/www.mbworld.org-vbulletin/640x393/clipboard02_79f295fff08741cf10ecbc6dc6d0fbfdade21558.jpg
02-01-2018, 02:52 AM
Replies: 71
Views: 5,854
Posted By MBNRG

Italian Ebay Seller is also OOS Still...

Italian Ebay Seller is also OOS

Still waiting on the UK Ebay dude, listing shows 10 units. Will update when hear back.
01-28-2018, 08:04 PM
01-28-2018, 04:32 PM
Replies: 36
Views: 5,639
Posted By MBNRG

Wow, sad to hear Bernhard! Your car is...

Wow, sad to hear Bernhard!
Your car is legendary, and I have had the pleasure of seeing it in the flesh - just a BEAST of a Black Series conversion!
And it has been maintained and worked on by some...
Forum: Marketplace
01-25-2018, 12:17 AM
01-25-2018, 12:17 AM
01-24-2018, 10:28 PM
Replies: 36
Views: 3,056
Posted By MBNRG

Most welcome, Jon. This forum is dope, and I...

Most welcome, Jon.

This forum is dope, and I myself am very thankful for all the help and knowledge gleaned from everyone on here.
The back and forth banter just adds another dimension to the...
01-24-2018, 10:03 PM
Replies: 36
Views: 3,056
Posted By MBNRG

.

.
01-24-2018, 09:39 PM
Replies: 36
Views: 3,056
Posted By MBNRG

Jon, the 44O Cooling Upgrade is truly...

Jon, the 44O Cooling Upgrade is truly unavailable? Have you tried contacting Tracy at oediscountparts.com? She has helped source the 2 box kit for myself and other forum members.

I haven't been...
Forum: Marketplace
01-17-2018, 07:07 PM
01-17-2018, 06:47 PM
Forum: Marketplace
01-14-2018, 12:00 AM
01-13-2018, 11:59 PM
01-10-2018, 08:51 PM
Replies: 78
Views: 9,927
Posted By MBNRG

Thumbs up Incorrect. MHP = ARH: ARH were the original...

Incorrect. MHP = ARH: ARH were the original manufacturer of MHP Headers, and now we can buy direct from ARH. The MHP/ARH headers have a solid history of performance, and are mentioned numerous times...
Forum: Marketplace
01-10-2018, 05:04 PM
01-10-2018, 04:43 PM
Replies: 6
Views: 1,159
Posted By MBNRG

Hump Day BUMP Let's find these brackets a...

Hump Day BUMP

Let's find these brackets a deserving home
Forum: Marketplace
01-07-2018, 10:03 PM
Replies: 5
Views: 591
Posted By MBNRG

FOR SALE: LIKE NEW RACINGBRAKE 390mm FRONT BRAKE CALIPER BRACKETS for W204 C63 AMG

Step up to larger 390mm brakes on the W204 C63:
For your consideration is 1 pair of Like New RacingBrake Front Brake Caliper Brackets to accommodate the larger 390mm Black Series front rotor.
...
01-07-2018, 06:49 PM
Replies: 6
Views: 1,159
Posted By MBNRG

Arrow FOR SALE: LIKE NEW PAIR of RACINGBRAKE 390mm FRONT BRAKE CALIPER BRACKETS

Step up to larger 390mm brakes on the W204 C63:
For your consideration is 1 pair of Like New RacingBrake Front Brake Caliper Brackets to accommodate the larger 390mm Black Series front rotor.
...
12-29-2017, 02:33 AM
Replies: 46
Views: 4,099
Posted By MBNRG

MB Star Tekinfo shows curb weight for the Sedan...

MB Star Tekinfo shows curb weight for the Sedan is 3924 lb, the Coupe is 3935 lb.

https://mbworld.org/forums/c63-amg-w204/687994-star-tekinfo.html#post7304681
12-22-2017, 03:56 PM
Replies: 94
Views: 8,820
Posted By MBNRG

Hi Joe, really appreciate your Tech info on this...

Hi Joe, really appreciate your Tech info on this forum!
Myself and others have a 2012 FL C63 (the earliest Facelift in the US, Europe it was 2011), but when checking official MB website for Recalls...
12-18-2017, 01:59 AM
Replies: 12
Views: 1,232
Posted By MBNRG

I believe the OEM Limited Slip Diffs for C63 and...

I believe the OEM Limited Slip Diffs for C63 and other models are made by Drexler - one of the very best manufacturers for LSDs. MB does not make the LSDs themselves.
These OEM units are very...
12-14-2017, 05:05 PM
Replies: 47
Views: 3,129
Posted By MBNRG

Thumbs up Hi there! Check your private messages for an...

Hi there! Check your private messages for an affordable brake option
12-09-2017, 04:51 PM
Replies: 1
Views: 574
Posted By MBNRG

Question Anyone Running Racing Brake BBK (or Black Series Front Calipers) with OEM 507 Wheels?

Ran into fitment issues with my Racing Brake BBK Black Series Upgrade and OEM 507 Wheels:

The 507 Wheels do not clear the stock C63 Front Calipers installed onto the Racing Brake Front Caliper...
11-28-2017, 04:09 PM
Replies: 3
Views: 826
Posted By MBNRG

PM'd

PM'd
11-28-2017, 06:36 AM
Replies: 27
Views: 1,433
Posted By MBNRG

https://cimg1.ibsrv.net/gimg/www.mbworld.org-vbull...

https://cimg1.ibsrv.net/gimg/www.mbworld.org-vbulletin/373x363-1/corn_dog_hot_dog_6a89913fd40877bacea08631b14356a9dae5a163.jpg

I'm starting to feel like a corn dog at a hot dog party, and it ain't...
11-28-2017, 03:08 AM
Replies: 13
Views: 1,024
Posted By MBNRG

i believe this is the original build thread: ...

i believe this is the original build thread:

https://mbworld.org/forums/c63-amg-w204/406844-acg-build-c63-weistec-stage-2-a-24.html

iirc, there were other threads on this same car, and ppl were...
11-20-2017, 10:01 PM
Replies: 11
Views: 890
Posted By MBNRG

This recall has separate listings for C63 Coupe...

This recall has separate listings for C63 Coupe and Sedan, and affects the W204 and W205 models :/

Since the Recall explicitly states the "Recall Population was determined through Production...
11-15-2017, 07:01 PM
Replies: 8
Views: 752
Posted By MBNRG

Yes, UK and Europe (possibly other countries) had...

Yes, UK and Europe (possibly other countries) had Facelift in 2011.
USA had Facelift in 2012 - and hence my Edition 1 is a 2012.
OP is in USA
11-15-2017, 04:34 PM
Replies: 8
Views: 752
Posted By MBNRG

Any 2012 W204 and up. 2012 was the model...

Any 2012 W204 and up.

2012 was the model year start of the Face Lifted version, or the "FL" that you see so often on here.
Showing results 1 to 200 of 403
 


 
Forum Jump

Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.