When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
They look good to me. The main things to check are the welds and the finish. The welds look good in the pic. They appear to be stainless steel and not coated mild steel. Use a rubbing compound on them before you install them. Rub them pretty hard and then check for cracks in the finish by holding it up to a light, at an angle.
Just got my order of new tips . There not amg style but they look really good . Will this look just as good as amg tips?
How much did they cost you and please post some pics of what they will look like. (From the back of the car and from under the car.) what exhaust setup do you have?
They look good to me. The main things to check are the welds and the finish. The welds look good in the pic. They appear to be stainless steel and not coated mild steel. Use a rubbing compound on them before you install them. Rub them pretty hard and then check for cracks in the finish by holding it up to a light, at an angle.
I like the slanted tips......
Thanks I will try out the compound. They are 304 stainless .
How much did they cost you and please post some pics of what they will look like. (From the back of the car and from under the car.) what exhaust setup do you have?
They where 130 for both . I will post pics once the exhaust is done . For my setup I have the resonator and muffler removed . Now I am adding an x pipe and dual tips . I will also post a new video.
If they are stainless, there is no need to use a polish or rubbing compound (except to just keep them looking good).
Polishing chromed pieces and looking at the surface under a bright light can show bubbles and irregularities that will later cause appearance problems.