When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Swapped over almost all the lights in my W211 to Led.
I used 2835 chipeset and for my license plate bulbs and interior lights under the doors. If the 2835 Leds cause a bulb out warning use the red backplate ones instead to fix that. I used a Canbus red Led backplate with a 470 resistor for the pedal lights, this was done to stop the flashing that normal leds cause when you try to use them there. Then last I used high powered 360 degree 194 leds where the fit. All the lights are 6000k and match.
Last I also use those silver 194 360 degree leds for the running lights as well, had these over a year now no problems. I have also used those 194 leds in a couple other vehicles with no problems, they are by far my favorite style/brightness. Vanity lights are also switched however one the passenger side works switch in the driver is broken never got around to fix it.
I will take more photos later when the sun goes down for the headlights/running lights/foglights all on.