When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Yes I get that and said it above. However they are all DIFFERENT SIZES, and go to different places on the subframe as shown in the pictures.... almost. The pictures are showing LOCATIONS, but not WHICH SIZE BUSHINGS GO WHERE.
may have to remove rear tire, undercover, sidecover, etc. gazette plate bolt? (blue circle), types of wiring connector, clamp, hose bolt, levelizer, etc. other necessary parts to remove
1. loosen R-1/R-2 bolts, lower the subframe 20-25mm
2. put the grease on the rigid collar, and insert it according to the illustration
*for safety do it one by one
*"special bolt" so lightly tap from the bottom when inserting
*Select an appropriate rigid collar based on the lower hole in the F1 area
*the size of the lower hole
3. keep the flatness/curveness?? of the subframe at a certain level and pre-tighten the bolt little by little
*do not use air tool
4. check that the bolted part is completely lifted, tighten with the proper torque
5. put back everything
may have to remove rear tire, undercover, sidecover, etc. gazette plate bolt? (blue circle), types of wiring connector, clamp, hose bolt, levelizer, etc. other necessary parts to remove
1. loosen R-1/R-2 bolts, lower the subframe 20-25mm
2. put the grease on the rigid collar, and insert it according to the illustration
*for safety do it one by one
*"special bolt" so lightly tap from the bottom when inserting
*Select an appropriate rigid collar based on the lower hole in the F1 area
*the size of the lower hole
3. keep the flatness/curveness?? of the subframe at a certain level and pre-tighten the bolt little by little
*do not use air tool
4. check that the bolted part is completely lifted, tighten with the proper torque
5. put back everything
Translated by a friend, not me.
THAT is one of the reasons why I love this forum, ask and ye shall receive!!!!
for future reference in regards to translation.....if you've got something that Google can't work out for you and you need something off the wall translated try taking it by one of your local State Agency Offices(Child Support,DFCAS,Dept of Corrections,***Dept of Labor***)....MOST State Agencies are required by statute to have translation services available to the general public... With my former agency we had access to every recognized language on the planet either via 24hr phone or direct reply email if you needed a document translated.....they are only required by statute to provide this service for customers BUT most places would take the goodwill step to help you out if asked.....just an fyi
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
No English instructions, but received some additional pictures which should help. Between these, the pics the kit came with, and the translation above, I think I'll be ok. Thanks again.
No English instructions, but received some additional pictures which should help. Between these, the pics the kit came with, and the translation above, I think I'll be ok.