When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys,
Im thinking about purchasing some CR kiwamis. specs are 18x9.5 et 38 squared.
I am bagged and I plan on running camber front and rear( I have adjustable top mounts in the front and adjustable camber arms in the rear). My fenders are rolled but i plan on pulling them soon too.
Hey guys,
Im thinking about purchasing some CR kiwamis. specs are 18x9.5 et 38 squared.
I am bagged and I plan on running camber front and rear( I have adjustable top mounts in the front and adjustable camber arms in the rear). My fenders are rolled but i plan on pulling them soon too.
Good luck with them up front. I considered running the same Kiwami's on my W204, but the x9.5 +38 up front will probably require 4-5 degrees of camber up front. Best looking wheels though. I ran them on a prior RSX a few years back.
Good luck with them up front. I considered running the same Kiwami's on my W204, but the x9.5 +38 up front will probably require 4-5 degrees of camber up front. Best looking wheels though. I ran them on a prior RSX a few years back.
Damn love your RSX! But yeah I'm just worried about the front, I spoke to stance lab about their setup. They informed me that they ran 2.5 camber in the front. The specs were similar too. (19x9.5 et 38) in the front.
Damn love your RSX! But yeah I'm just worried about the front, I spoke to stance lab about their setup. They informed me that they ran 2.5 camber in the front. The specs were similar too. (19x9.5 et 38) in the front.
You may want to look into 19's as well I forgot to mention. They fill the wells a lot better. I went 19 and do not regret it one bit.
No, it was 19x9.5 in the front only. 19x10 et 22 or something in the rear. Oh yeah I feel you, I ran 19s last summer just want something different this year.
Hi, I've just got myself a w204 C220 Coupe, I will be lowering it 35mm, I'm looking at some wheels and want to know if I'll have any issues,
Wheels are: 19/8.5 and 19/9.5 ET 42, was thinking about running 225/35/19 up front and 255/30/19 at rear, would this work?
Hey guys, I got a 2013 C300 4matic sport Sedan, I just bought a set of E63 Reps(18x8.5 front Et35, 18x9.5 Rear ET 35) I'm still fully stock. I need help with tire size suggestions
Looking to get some Avant Garde M580s for my 2014 C300.
Would 19x8.5 +45 front and 19x9.5 +45-48 rear fit? I don't really want the rear wheels to be super flat faced that's why I mentioned 45-48 offset rather than just the highest offset they offer.
I want to fit the widest tire I can on the rears (255/265 if possible).
Looking to get some Avant Garde M580s for my 2014 C300.
Would 19x8.5 +45 front and 19x9.5 +45-48 rear fit? I don't really want the rear wheels to be super flat faced that's why I mentioned 45-48 offset rather than just the highest offset they offer.
I want to fit the widest tire I can on the rears (255/265 if possible).
Those would fit and still wouldn't poke out. I ran 8.5 +15 front and 10 +38 rear before, the more wheel you poke out the more stretch you have to compensate for just an FYI. If you do 9.5 +45 you can run a 265 easily but I would get either 30 or 35 sidewall
The thing 95% of you on this thread don't understand is that not every 245/35/19 for example fits the same. Some brands run thinner, some run wider, and some run true to form. Just because I run a 225/35/19 on my car doesn't mean another brands 225/35/19 will fit without rubbing.
Hate to revive a dead thread..although most of this forum is dead :sigh: but I just came from an '09 370z on Accuair running stretched 20x10.5 -10, 20x12 -10.. I understand that my 13 C250 sport coupe is pretty narrow but I want to run as a aggressive track inspired fitment as possible.. With that being said, on H&R super sports, a shop in Miami recommended 20x9 +35 , 20x10 +32 . I don't mind having a slight stretch, never had a problem with my super stretched wheels (what this forum would probably consider them as ).
Would appreciate the help from you gents! Thank you!!
Hate to revive a dead thread..although most of this forum is dead :sigh: but I just came from an '09 370z on Accuair running stretched 20x10.5 -10, 20x12 -10.. I understand that my 13 C250 sport coupe is pretty narrow but I want to run as a aggressive track inspired fitment as possible.. With that being said, on H&R super sports, a shop in Miami recommended 20x9 +35 , 20x10 +32 . I don't mind having a slight stretch, never had a problem with my super stretched wheels (what this forum would probably consider them as ).
Would appreciate the help from you gents! Thank you!!
Do you want to run bags or coils? Look a few posts above for the purple C63 Cocaine is running. That's the most aggressive as far as stance that I have seen but he is also a C63 so he has wider front fenders. As far as "track" aggressive I would look into something in the x9 +35 range. I'm running 19x8.5 +45 with 5mm spacers all around. I wish they were +35 but then I'd have to roll fenders etc etc.
What's up guys I finally got my wheels and test fitted them over the weekend. The front pokes as expected but I plan on running -3 camber and rolling my fenders for better fitment. I'm putting 5mm spacers in the rear for flush fitment in the back when I air out. Planing on running 225/40 or 215/40.
What's up guys I finally got my wheels and test fitted them over the weekend. The front pokes as expected but I plan on running -3 camber and rolling my fenders for better fitment. I'm putting 5mm spacers in the rear for flush fitment in the back when I air out. Planing on running 225/40 or 215/40.
Dopeeeee. Are they authentic CR Kai's? What sizes did you go with?
Yeah they're real, took forever for them to get here though lol. I went with 18x9.5 et 38 square set up.
Awesome! That's the exact setup I was thinking of switching to eventually with 19's instead of 18's. Keep us updated when it's done. I'm curious what all will have to be done (camber degrees, rolling, pulling, etc).
Awesome! That's the exact setup I was thinking of switching to eventually with 19's instead of 18's. Keep us updated when it's done. I'm curious what all will have to be done (camber degrees, rolling, pulling, etc).
i was gonna go with 19s just because they would fill the wheel well better but I decided to go with 18s for a lower ride. For sure I'll keep you guys posted I'm hoping I can finish it sometime next month depending how much free time I have.
i was gonna go with 19s just because they would fill the wheel well better but I decided to go with 18s for a lower ride. For sure I'll keep you guys posted I'm hoping I can finish it sometime next month depending how much free time I have.
Sounds good. That's my reasoning as well for the 19's. Did you go wih the F1 Fabrications camber arms?