bgm130

I had the side skirts and KW kit installed about 2 weeks ago. i have had some time to see how i like them and get some proper pictures now that it is warm out.

Lets start out with the KW kit. Ordered from autotalent and received within 2 weeks. Golan was great to deal with and kept me updated on shipping status. Autocouture did the install and set the ride height a little less aggressive for now. this will allow for any settling and i will revisit it once my new wheels arrive.
My main goal was to rid the front wheels gap. but with the added camber after the drop the wheels have a tucked look which i do not like. spacers would help that on these wheels but since they are being replaced i am not concerned at this time.

The Side skirts from RWcarbon. I was checking out the site and looking at the new rear diffuser they offer. took a look at these and decided to give them a try. they were in stock and they said they could ship out the next day. arrived within a week and had them installed along with the suspension.

I was not sure i would like the look as it may have been "too much" however i think it looks great. the CF is high quality and matches the other parts as well as the OEM wing i have. also keeps the line from the front lip going down the side.

I was told install was easy (3m tape and some screws) and fitment was dead on. only issue i have had is watching my feet when i get in the car as they stick out a bit.

and here are a few pics

DarkProphet

Looks great! Can you post the specs on the wheels?

bgm130

Thank you, I got the wheels from Vividracing after they posted a thread on here. They are Vorstiener VFF-103
19x8.5 +45 and 19x9.5 +46

only thing i would change is have the front wheel stick out more. like add a 10-15mm spacer.

DarkProphet

Awesome, thanks! What size tires are you running? If larger than stock any rubbing??

bgm130

running the stock Dunlops up front and 265/35/19 in the rear. no rubbing at all

RW Carbon

Looks awesome as always Brett!!

Vic55

look good - can you post a side view pic by chance?

bgm130

Funny I looked through all my shots and don't see any from the side. Here are a couple from my phone. Don't mind the goose crap I drove through.

Vic55

Thanks, looks good. You might have more room in the back to drop based on the pics???

kzflags

you mind also commenting on the ride quality?

last time i tried H&R springs on my 3 series it was a freakin nightmare. bottomed out everytime i drove

bgm130

Thanks Vic, yes I def have some room and will fine tune it when my new wheels arrive. I am getting larger wheels with a custom fit so I don't have to add spacers.
Honestly I have not noticed much. I had HR springs once and it felt like my WRX turned into a Cadillac and floated after hitting a bump. Then it sagged and had to change to a set of coilocers, so I know what you mean.
So far these have been great. being able to raise/lower is a nice touch especially while keeping the electronic dampening function.