When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Since we already have negative camber on our cars, when you lowered it, doesn't it make the negative camber even greater? If so, are you having uneven tire wear because of it?
We currently have 11,500 miles on our sedan. Just this week we upgraded to Michelin Pilot Super Sports from the original Dunlops. Main reason was a cupped front tire, and the rest were showing some good wear but not completely needing replacement. Also, had an alignment done, and knew it would not be completely in spec. Mercedes got it as close as they could, but still out of spec. (No notes on final spec).
My guess is if it's pretty low, you may lose 3,000 miles off the life of the tires. Likely fronts first, where the camber is more noticeable. Here are a few pics, but hard to show the camber.
If you are gonna do it the right way, coilovers with camber plates is the way to go. Otherwise yes, you'll have negative camber (not a TERRIBLE thing).
Camber is definitely more negative but I like to turn a lot
The most import thing is to eliminate the "scrubbing" which comes from the toe adjustments.
vic, since you seem to be the one running the lowest setting on the HAS kit, are the driver assistance features affected? Specifically the cruise control and lane keep assist? Some of us want a low car but live in the land of eternal traffic jams
vic, since you seem to be the one running the lowest setting on the HAS kit, are the driver assistance features affected? Specifically the cruise control and lane keep assist? Some of us want a low car but live in the land of eternal traffic jams
I have had zero issues with either of those options- I rarely use them as I hate the lane keep behavior but they are fully functional.
How stiffer is the ride, I've been hearing its like s+ in comfort.
Yesterday 10:08 AM
As for my ride, it feels actually more comfortable as the KW's are more progressive in nature with different spring rates than OEM which gives a better feel over undulations at slower speeds and then it gets stiffer at higher speeds when pushing into bends. I really didnt like the OEM springs as they felt too taut even in docile driving processes and bouncier while at higher speeds. The KW's did a good job fixing this issue and I was able to drop the car pretty low.