When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Salute to Dad's C63: My W204 Black Series Sedan completed
i knew dad's c63 did retrofit a complete bs sedan 5 or 6 years ago...and now finally I made mine completed
The car has been retrofitted with genuine black series parts (front/side/rear bumper) When i started this work, i referred dad's c63 work and everything looks straight4ward except the work for rear side vent arch fender. I found it is too aggressive for me and for craftman here to complete the same quality as Dad's work...admit it or not, a full cut and retrofit the whole rear fender for chinese auto tuning shop here is very difficult and i dont have the resource to get a BS rear fender include C pillar. Instead, i cut the bs skirt into 2 pieces: skirt part and vent arch part, i fitted the arch with customized rear fender.
Dad's C63 separate 2 pierces and remain an "L” line on the door as shown below
And here is some photos explain what i did: i used putty to fill the line and made it look like part of the rear door
and below is the latest image with BBS RI-D wheel, hope you like it
I wasnt familiar with "BBS by Dura". The "by Dura" threw me off, so a little research. 7000 series aluminum. Same as the newest iPhone lol.
Here's the link on the BBS page: