Official Picture Thread - W212 AMG
#627
#629
MBWorld Fanatic!
As for the shaving, it's just taking off material from the hub where it meets the car. Just machining down the metal.
The following users liked this post:
Ralcbah (04-30-2017)
#630
Member
#631
Also, did you go with the 10.5" rear because the 10" (with whatever offset niche uses for that one) wasn't aggressive enough?
The following users liked this post:
a100steaksauce (06-24-2017)
The following users liked this post:
Ag Surfer (05-16-2017)
#636
Senior Member
The murdering continues. Plastidip'd the front grill, and tinted the headlights and taillights. Next up is the AMS carbon fiber intake.
![](https://photos.smugmug.com/Showoff/E63/n-Rv9Smr/FourthSet/i-VzBGTSP/0/0c739e9f/XL/IMG_7152-XL.jpg)
![](https://photos.smugmug.com/Showoff/E63/n-Rv9Smr/FourthSet/i-VzBGTSP/0/0c739e9f/XL/IMG_7152-XL.jpg)
![](https://photos.smugmug.com/Showoff/E63/n-Rv9Smr/FourthSet/i-GPc7mW3/0/da426d4c/XL/IMG_7153-XL.jpg)
The following users liked this post:
a100steaksauce (06-24-2017)
#639
Senior Member
#641
Senior Member
Stock pads. Don't really notice that much brake dust. Man I wish they made black rotors, but obviously paint wouldn't work. Metal would have to be black all the way through I guess.
#642
Senior Member
Join Date: Jul 2016
Location: Queens,New York
Posts: 390
Likes: 0
Received 26 Likes
on
23 Posts
E63s
They dont look bad at all , the Giro disc hat color gives it a clean look
The following 2 users liked this post by Jimminez:
a100steaksauce (06-24-2017),
mj_39 (05-19-2017)
The following 2 users liked this post by raudiace4:
CerBErusM113 (10-20-2017),
DCTMOTORSPORTS (05-21-2017)
The following users liked this post:
mj_39 (05-19-2017)
#647
Member
#648
MBWorld Fanatic!
Join Date: Jun 2014
Location: IL
Posts: 1,511
Received 595 Likes
on
341 Posts
19 E63s, 23 M3 compX, B9 SQ5
Thanks! I'm running a 295/30/19 PS4 on the rear, and this is about a little more than half threaded on the links, and exactly half way on the HAS in front. The rear is perfect for me, but I need to adjust/lower the front a little more.
The following users liked this post:
mj_39 (05-20-2017)