When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am trying to source those carbon fiber rear bumper flares that attach to the bottom left and right portions. They are $200 on eBay. I just missed someone selling theirs for half the price.
Anyone that has these for sale, head my way. Thanks.
Lil butt shot to pump you up. Getting CLS63 mufflers swapped out (or just tips, not sure). Got the CF "Ducktail" wing in today...Just waiting on the heat-gun, as that stock wing is a son of a gun to get off. That'll complete the rear, then sideskirts, lowering kit, some wide 19" wheels (secret), with nasty rolled fenders. Should be pretty. Might top it off with a roof rack for the winter mountain runs to Mt. High. Love that I can surf in the morning, and snowboard all before noon, and live in Los Angeles!
Last edited by SatelliteMan; 08-31-2017 at 01:16 AM.
Did those splitters come with pre-drilled holes?
If so, do they line up correctly with the 2 torx bolts on the bolt of the bumper?
If not, are you drilling through the bumper cover to attach with the nuts and bolts you have in your picture?
Double sided tape used as well?
I was looking at these from ebay but I notice the design is a little bit different towards the tip where it comes closer to the muffler outlet
Did those splitters come with pre-drilled holes?
If so, do they line up correctly with the 2 torx bolts on the bolt of the bumper?
If not, are you drilling through the bumper cover to attach with the nuts and bolts you have in your picture?
Double sided tape used as well?
I was looking at these from ebay but I notice the design is a little bit different towards the tip where it comes closer to the muffler outlet
I don't understand how a front lip or spoiler can be $300, and rear splitters not even a 1/4 of the size are $200.
Don't even get me started on pricing of carbon fiber "overlayed" parts and how wonky it can be.
A massive RW Carbon lip is like you said, $300, but a steering wheel that has like 9 inches of carbon fiber on it is like $2k all said and done with airbag, while a Alcantara / Leather wheel like mine can be had for literally half the price... Very strange, imho.
Did the rear bumper change at all from pre-fl to fl? I ask because I see 2 different styles of splitters. One that has a straight, angled side and the other that has small curve at the end. And when you look all over ebay, you can see that they offer the one that with the small curve as BOTH 2008-2011 only, AND 2012+ in different auctions.
heres the one with the long straight angle. when looking at the pics from the bottom, u can almost see how the above pieces would fit all the way to the rear of the bumper, right before the muffler outlet and curve slightly around the diffuser
Did the rear bumper change at all from pre-fl to fl? I ask because I see 2 different styles of splitters. One that has a straight, angled side and the other that has small curve at the end. And when you look all over ebay, you can see that they offer the one that with the small curve as BOTH 2008-2011 only, AND 2012+ in different auctions.
heres the one with the long straight angle. when looking at the pics from the bottom, u can almost see how the above pieces would fit all the way to the rear of the bumper, right before the muffler outlet and curve slightly around the diffuser
Yeah,and different style diffuser too. I work with a lot of composite mold houses for work, so I might bring them a few items to price out...this being one and my diffuser seat backs as another. Need to bring those price points down and more people can enjoy.
I am trying to source those carbon fiber rear bumper flares that attach to the bottom left and right portions. They are $200 on eBay. I just missed someone selling theirs for half the price.
Anyone that has these for sale, head my way. Thanks.
08-31-2017, 01:11 AM
