When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
SLR Throttle body and unknown blower inlet/plenum (pics inside)
After digging into this project car I'm finding some signs of hope with parts like these. Pulled the tanks to put in new injectors and decided to measure the throttle body and at about 3.25" id I became suspicious as there's no adapter plate between tb and plenum. Checked the part number and it comes up as 2004+ SLR for the vehicle. Curious as to who has seen this part number and to what car it originates from.
2004 SLR McLaren comes up with...doesn't seem like the adapter is a separately ordered part, but i'm just looking online.
#10
Number Note
There are several options available for your car, pick the correct one.
A 155 090 03 80 TURBOCHARGER MECHANICAL
A 155 090 06 80 COMPRESSOR
A155 090 06 80 is the updated part and part number.
2004 SLR McLaren comes up with...doesn't seem like the adapter is a separately ordered part, but i'm just looking online.
#10
Number Note
There are several options available for your car, pick the correct one.
A 155 090 03 80 TURBOCHARGER MECHANICAL
A 155 090 06 80 COMPRESSOR
A155 090 06 80 is the updated part and part number.
I was mainly curious as to the plenums origin. I know the throttle body came from an slr so I'll assume the plenum should be from that or something similar (maybe later model sl55). There are a ton of mods done to the car and a lot were removed by the previous owner. Nice to find a few gems on a "fixer upper" like this.