bEATONu

After digging into this project car I'm finding some signs of hope with parts like these. Pulled the tanks to put in new injectors and decided to measure the throttle body and at about 3.25" id I became suspicious as there's no adapter plate between tb and plenum. Checked the part number and it comes up as 2004+ SLR for the vehicle. Curious as to who has seen this part number and to what car it originates from.

hachiroku

2004 SLR McLaren comes up with...doesn't seem like the adapter is a separately ordered part, but i'm just looking online.

#10
Number Note
There are several options available for your car, pick the correct one.
A 155 090 03 80 TURBOCHARGER MECHANICAL
A 155 090 06 80 COMPRESSOR

A155 090 06 80 is the updated part and part number.

bEATONu

I was mainly curious as to the plenums origin. I know the throttle body came from an slr so I'll assume the plenum should be from that or something similar (maybe later model sl55). There are a ton of mods done to the car and a lot were removed by the previous owner. Nice to find a few gems on a "fixer upper" like this.

hachiroku

that's more like it.


SL 55 AMG Standard, North America, Japan SL ROADSTER Car 230.472 M - Engine: 113.995 M 113 E55

#20
A 113 140 09 12 PIPE LINE 20 1

bEATONu

Good deal confirming that! I appreciate it, makes a little more sense as these mods are being ironed out.