AMG Rep. contact
05-23-2017, 06:29 PM
#2
The following users liked this post:
brainstormer1 (05-23-2017)
05-24-2017, 04:44 PM
#4
Junior Member
Thread Starter
Join Date: Mar 2015
Location: Sacramento, CA
Posts: 32
Received 0 Likes
on
0 Posts
2012 CLS63 AMG PP
2012 CLS63 that is riding on the first 1-2 inches of the front tires.
I would consider extremely heavy negative camber wear.
Noticed cupping at 10k miles on tires. Alignment proved within tolerances.
At 20k miles, down to steel cord, within 1 inch and cupping next inch.
Being told by dealer that AMG designed this vehicle to ride on the inside edge of tires.
However, no other CLS driver I have spoken to has had this issue.
I contacted Continental who advise this is not normal wear.
Want to hear from AMG that the CLS is designed to wear front tires out in this manner.
I would consider extremely heavy negative camber wear.
Noticed cupping at 10k miles on tires. Alignment proved within tolerances.
At 20k miles, down to steel cord, within 1 inch and cupping next inch.
Being told by dealer that AMG designed this vehicle to ride on the inside edge of tires.
However, no other CLS driver I have spoken to has had this issue.
I contacted Continental who advise this is not normal wear.
Want to hear from AMG that the CLS is designed to wear front tires out in this manner.
05-24-2017, 04:48 PM
#5
Junior Member
Thread Starter
Join Date: Mar 2015
Location: Sacramento, CA
Posts: 32
Received 0 Likes
on
0 Posts
2012 CLS63 AMG PP
Thanks Jan for anytime you spend on my issue...
Dealer checked, ball joints, and other front end parts.
I just believe there is something wrong with the front end...
I could see some cambering regarding cornering, but this is extreme..
Dealer checked, ball joints, and other front end parts.
I just believe there is something wrong with the front end...
I could see some cambering regarding cornering, but this is extreme..
